u-boot

History

Parthiban Nallathambi a443c8212c ARM: dts: i.MX6ULL: U-Boot specific dts for u-boot, dm-spl u-boot,dm-spl property is specific to U-Boot, so created one for i.MX6ULL platforms. Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>		2019-06-11 10:42:48 +02:00
..
Kconfig	imx: Add PHYTEC phyBOARD-i.MX6UL-Segin	2019-01-28 12:47:27 +01:00
MAINTAINERS	ARM: dts: i.MX6ULL: U-Boot specific dts for u-boot, dm-spl	2019-06-11 10:42:48 +02:00
Makefile	imx: Add PHYTEC phyBOARD-i.MX6UL-Segin	2019-01-28 12:47:27 +01:00
pcl063.c	imx: Add PHYTEC phyBOARD-i.MX6UL-Segin	2019-01-28 12:47:27 +01:00
README	imx: Add PHYTEC phyBOARD-i.MX6UL-Segin	2019-01-28 12:47:27 +01:00
spl.c	imx: Add PHYTEC phyBOARD-i.MX6UL-Segin	2019-01-28 12:47:27 +01:00

README

How to use U-Boot on PHYTEC phyBOARD-i.MX6UL-Segin
--------------------------------------------------

- Configure and build U-Boot for phyCORE-i.MX6UL:

    $ make mrproper
    $ make phycore_pcl063_defconfig
    $ make

  This will generate SPL and u-boot-dtb.img images.

- The SPL and u-boot-dtb.img images need to be flashed into the micro SD card:

    $ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
    $ sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Jumper settings:

  JP1:   Open: Boot from NAND
       Closed: Boot from SD/MMC1

- Connect the Serial cable to UART0 and the PC for the console.

- Insert the micro SD card in the board and power it up.

- U-Boot messages should come up.