leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a2a89b2e21
u-boot/arch/powerpc/include/asm/fsl_liodn.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

248 lines
8.5 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2009-2011 Freescale Semiconductor, Inc.
*/
#ifndef _FSL_LIODN_H_
#define _FSL_LIODN_H_
#include <asm/types.h>
#include <fsl_qbman.h>
struct srio_liodn_id_table {
u32 id[2];
unsigned long reg_offset[2];
u8 num_ids;
u8 portid;
};
#define SET_SRIO_LIODN_1(port, idA) \
{ .id = { idA }, .num_ids = 1, .portid = port, \
.reg_offset[0] = offsetof(ccsr_gur_t, rio##port##liodnr) \
+ CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \
}
#define SET_SRIO_LIODN_2(port, idA, idB) \
{ .id = { idA, idB }, .num_ids = 2, .portid = port, \
.reg_offset[0] = offsetof(ccsr_gur_t, rio##port##liodnr) \
+ CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \
.reg_offset[1] = offsetof(ccsr_gur_t, rio##port##maintliodnr) \
+ CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \
}
#define SET_SRIO_LIODN_BASE(port, id_a) \
{ .id = { id_a }, .num_ids = 1, .portid = port, \
.reg_offset[0] = offsetof(struct ccsr_rio, liodn) \
+ (port - 1) * 0x200 \
+ CONFIG_SYS_FSL_SRIO_ADDR, \
}
struct liodn_id_table {
const char * compat;
u32 id[2];
u8 num_ids;
phys_addr_t compat_offset;
unsigned long reg_offset;
};
struct fman_liodn_id_table {
/* Freescale FMan Device Tree binding was updated for FMan.
* We need to support both new and old compatibles in order not to
* break backward compatibility.
*/
const char *compat[2];
u32 id[2];
u8 num_ids;
phys_addr_t compat_offset;
unsigned long reg_offset;
};
extern u32 get_ppid_liodn(int ppid_tbl_idx, int ppid);
extern void set_liodns(void);
extern void fdt_fixup_liodn(void *blob);
#define SET_LIODN_BASE_1(idA) \
{ .id = { idA }, .num_ids = 1, }
#define SET_LIODN_BASE_2(idA, idB) \
{ .id = { idA, idB }, .num_ids = 2 }
#define SET_FMAN_LIODN_ENTRY(name1, name2, idA, off, compatoff)\
{ .compat[0] = name1, \
.compat[1] = name2, \
.id = { idA }, .num_ids = 1, \
.reg_offset = off + CONFIG_SYS_CCSRBAR, \
.compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
}
#define SET_LIODN_ENTRY_1(name, idA, off, compatoff) \
{ .compat = name, \
.id = { idA }, .num_ids = 1, \
.reg_offset = off + CONFIG_SYS_CCSRBAR, \
.compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
}
#define SET_LIODN_ENTRY_2(name, idA, idB, off, compatoff) \
{ .compat = name, \
.id = { idA, idB }, .num_ids = 2, \
.reg_offset = off + CONFIG_SYS_CCSRBAR, \
.compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \
}
#define SET_GUTS_LIODN(compat, liodn, name, compatoff) \
SET_LIODN_ENTRY_1(compat, liodn, \
offsetof(ccsr_gur_t, name) + CONFIG_SYS_MPC85xx_GUTS_OFFSET, \
compatoff)
#define SET_USB_LIODN(usbNum, compat, liodn) \
SET_GUTS_LIODN(compat, liodn, usb##usbNum##liodnr,\
CONFIG_SYS_MPC85xx_USB##usbNum##_OFFSET)
#define SET_SATA_LIODN(sataNum, liodn) \
SET_GUTS_LIODN("fsl,pq-sata-v2", liodn, sata##sataNum##liodnr,\
CONFIG_SYS_MPC85xx_SATA##sataNum##_OFFSET)
#define SET_PCI_LIODN(compat, pciNum, liodn) \
SET_GUTS_LIODN(compat, liodn, pex##pciNum##liodnr,\
CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)
#define SET_PCI_LIODN_BASE(compat, pciNum, liodn) \
SET_LIODN_ENTRY_1(compat, liodn,\
offsetof(ccsr_pcix_t, liodn_base) + CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET,\
CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)
/* reg nodes for DMA start @ 0x300 */
#define SET_DMA_LIODN(dmaNum, compat, liodn) \
SET_GUTS_LIODN(compat, liodn, dma##dmaNum##liodnr,\
CONFIG_SYS_MPC85xx_DMA##dmaNum##_OFFSET + 0x300)
#define SET_SDHC_LIODN(sdhcNum, liodn) \
SET_GUTS_LIODN("fsl,esdhc", liodn, sdmmc##sdhcNum##liodnr,\
CONFIG_SYS_MPC85xx_ESDHC_OFFSET)
#define SET_QE_LIODN(liodn) \
SET_GUTS_LIODN("fsl,qe", liodn, qeliodnr,\
CONFIG_SYS_MPC85xx_QE_OFFSET)
#define SET_TDM_LIODN(liodn) \
SET_GUTS_LIODN("fsl,tdm1.0", liodn, tdmliodnr,\
CONFIG_SYS_MPC85xx_TDM_OFFSET)
#define SET_QMAN_LIODN(liodn) \
SET_LIODN_ENTRY_1("fsl,qman", liodn, \
offsetof(struct ccsr_qman, liodnr) + \
CONFIG_SYS_FSL_QMAN_OFFSET, \
CONFIG_SYS_FSL_QMAN_OFFSET)
#define SET_BMAN_LIODN(liodn) \
SET_LIODN_ENTRY_1("fsl,bman", liodn, \
offsetof(struct ccsr_bman, liodnr) + \
CONFIG_SYS_FSL_BMAN_OFFSET, \
CONFIG_SYS_FSL_BMAN_OFFSET)
#define SET_PME_LIODN(liodn) \
SET_LIODN_ENTRY_1("fsl,pme", liodn, offsetof(ccsr_pme_t, liodnr) + \
CONFIG_SYS_FSL_CORENET_PME_OFFSET, \
CONFIG_SYS_FSL_CORENET_PME_OFFSET)
#define SET_PMAN_LIODN(num, liodn) \
SET_LIODN_ENTRY_2("fsl,pman", liodn, 0, \
offsetof(struct ccsr_pman, ppa1) + \
CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET, \
CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET)
/* -1 from portID due to how immap has the registers */
#define FM_PPID_RX_PORT_OFFSET(fmNum, portID) \
CONFIG_SYS_FSL_FM##fmNum##_OFFSET + \
offsetof(struct ccsr_fman, fm_bmi_common.fmbm_ppid[portID - 1])
#ifdef CONFIG_SYS_FMAN_V3
/* enetNum is 0, 1, 2... so we + 8 for 1g to get to HW Port ID */
#define SET_FMAN_RX_1G_LIODN(fmNum, enetNum, liodn) \
SET_FMAN_LIODN_ENTRY("fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx", \
liodn, FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 8), \
CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_1G_OFFSET)
/* enetNum is 0, 1, 2... so we + 16 for 10g to get to HW Port ID */
#define SET_FMAN_RX_10G_LIODN(fmNum, enetNum, liodn) \
SET_FMAN_LIODN_ENTRY("fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx", \
liodn, FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 16), \
CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_10G_OFFSET)
/* enetNum is 0, 1, 2... so we + 8 for type-2 10g to get to HW Port ID */
#define SET_FMAN_RX_10G_TYPE2_LIODN(fmNum, enetNum, liodn) \
SET_FMAN_LIODN_ENTRY("fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx", \
liodn, FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 8), \
CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_1G_OFFSET)
#else
/* enetNum is 0, 1, 2... so we + 8 for 1g to get to HW Port ID */
#define SET_FMAN_RX_1G_LIODN(fmNum, enetNum, liodn) \
SET_FMAN_LIODN_ENTRY("fsl,fman-v2-port-rx", "fsl,fman-port-1g-rx", \
liodn, FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 8), \
CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_1G_OFFSET)
/* enetNum is 0, 1, 2... so we + 16 for 10g to get to HW Port ID */
#define SET_FMAN_RX_10G_LIODN(fmNum, enetNum, liodn) \
SET_FMAN_LIODN_ENTRY("fsl,fman-v2-port-rx", "fsl,fman-port-10g-rx", \
liodn, FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 16), \
CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_10G_OFFSET)
#endif
/*
* handle both old and new versioned SEC properties:
* "fsl,secX.Y" became "fsl,sec-vX.Y" during development
*/
#define SET_SEC_JR_LIODN_ENTRY(jrNum, liodnA, liodnB) \
SET_LIODN_ENTRY_2("fsl,sec4.0-job-ring", liodnA, liodnB,\
offsetof(ccsr_sec_t, jrliodnr[jrNum].ls) + \
CONFIG_SYS_FSL_SEC_OFFSET, \
CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrNum), \
SET_LIODN_ENTRY_2("fsl,sec-v4.0-job-ring", liodnA, liodnB,\
offsetof(ccsr_sec_t, jrliodnr[jrNum].ls) + \
CONFIG_SYS_FSL_SEC_OFFSET, \
CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrNum)
/* This is a bit evil since we treat rtic param as both a string & hex value */
#define SET_SEC_RTIC_LIODN_ENTRY(rtic, liodnA) \
SET_LIODN_ENTRY_1("fsl,sec4.0-rtic-memory", \
liodnA, \
offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \
CONFIG_SYS_FSL_SEC_OFFSET, \
CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa)), \
SET_LIODN_ENTRY_1("fsl,sec-v4.0-rtic-memory", \
liodnA, \
offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \
CONFIG_SYS_FSL_SEC_OFFSET, \
CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa))
#define SET_SEC_DECO_LIODN_ENTRY(num, liodnA, liodnB) \
SET_LIODN_ENTRY_2(NULL, liodnA, liodnB, \
offsetof(ccsr_sec_t, decoliodnr[num].ls) + \
CONFIG_SYS_FSL_SEC_OFFSET, 0)
#define SET_RAID_ENGINE_JQ_LIODN_ENTRY(jqNum, rNum, liodnA) \
SET_LIODN_ENTRY_1("fsl,raideng-v1.0-job-ring", \
liodnA, \
offsetof(struct ccsr_raide, jq[jqNum].ring[rNum].cfg1) + \
CONFIG_SYS_FSL_RAID_ENGINE_OFFSET, \
offsetof(struct ccsr_raide, jq[jqNum].ring[rNum].cfg0) + \
CONFIG_SYS_FSL_RAID_ENGINE_OFFSET)
#define SET_RMAN_LIODN(ibNum, liodn) \
SET_LIODN_ENTRY_1("fsl,rman-inbound-block", liodn, \
offsetof(struct ccsr_rman, mmitdr) + \
CONFIG_SYS_FSL_CORENET_RMAN_OFFSET, \
CONFIG_SYS_FSL_CORENET_RMAN_OFFSET + ibNum * 0x1000)
extern struct liodn_id_table liodn_tbl[], liodn_bases[], sec_liodn_tbl[];
extern struct liodn_id_table raide_liodn_tbl[];
extern struct fman_liodn_id_table fman1_liodn_tbl[], fman2_liodn_tbl[];
#ifdef CONFIG_SYS_SRIO
extern struct srio_liodn_id_table srio_liodn_tbl[];
extern int srio_liodn_tbl_sz;
#endif
extern struct liodn_id_table rman_liodn_tbl[];
extern int liodn_tbl_sz, sec_liodn_tbl_sz, raide_liodn_tbl_sz;
extern int fman1_liodn_tbl_sz, fman2_liodn_tbl_sz;
extern int rman_liodn_tbl_sz;
#endif
Reference in New Issue View Git Blame Copy Permalink