83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
174 lines
5.4 KiB
C
174 lines
5.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Prafulla Wadaskar <prafulla@marvell.com>
|
|
*
|
|
* (C) Copyright 2009
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* (C) Copyright 2011-2012
|
|
* Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
|
|
* Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
|
|
*/
|
|
|
|
/*
|
|
* for linking errors see
|
|
* http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
|
|
*/
|
|
|
|
#ifndef _CONFIG_KM_KIRKWOOD_H
|
|
#define _CONFIG_KM_KIRKWOOD_H
|
|
|
|
/* KM_KIRKWOOD */
|
|
#if defined(CONFIG_KM_KIRKWOOD)
|
|
#define CONFIG_HOSTNAME "km_kirkwood"
|
|
#define CONFIG_KM_DISABLE_PCIE
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
|
|
/* KM_KIRKWOOD_PCI */
|
|
#elif defined(CONFIG_KM_KIRKWOOD_PCI)
|
|
#define CONFIG_HOSTNAME "km_kirkwood_pci"
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
#define CONFIG_KM_FPGA_CONFIG
|
|
#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048"
|
|
#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
|
|
|
|
/* KM_KIRKWOOD_128M16 */
|
|
#elif defined(CONFIG_KM_KIRKWOOD_128M16)
|
|
#define CONFIG_HOSTNAME "km_kirkwood_128m16"
|
|
#undef CONFIG_SYS_KWD_CONFIG
|
|
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
|
|
#define CONFIG_KM_DISABLE_PCIE
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
|
|
/* KM_NUSA / KM_SUGP1 */
|
|
#elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1)
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
|
|
# if defined(CONFIG_KM_NUSA)
|
|
#define CONFIG_HOSTNAME "kmnusa"
|
|
# elif defined(CONFIG_KM_SUGP1)
|
|
#define CONFIG_HOSTNAME "kmsugp1"
|
|
#define KM_PCIE_RESET_MPP7
|
|
#endif
|
|
|
|
#undef CONFIG_SYS_KWD_CONFIG
|
|
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
|
|
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
|
|
#define CONFIG_KM_FPGA_CONFIG
|
|
#define CONFIG_KM_PIGGY4_88E6352
|
|
#define CONFIG_MV88E6352_SWITCH
|
|
#define CONFIG_KM_MVEXTSW_ADDR 0x10
|
|
|
|
/* KM_MGCOGE3UN */
|
|
#elif defined(CONFIG_KM_MGCOGE3UN)
|
|
#define CONFIG_HOSTNAME "mgcoge3un"
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
#undef CONFIG_SYS_KWD_CONFIG
|
|
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
|
|
#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0"
|
|
#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
|
|
#define CONFIG_KM_DISABLE_PCIE
|
|
#define CONFIG_KM_PIGGY4_88E6061
|
|
|
|
/* KMCOGE5UN */
|
|
#elif defined(CONFIG_KM_COGE5UN)
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
#undef CONFIG_SYS_KWD_CONFIG
|
|
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
|
|
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
|
|
#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
|
|
#define CONFIG_HOSTNAME "kmcoge5un"
|
|
#define CONFIG_KM_DISABLE_PCIE
|
|
#define CONFIG_KM_PIGGY4_88E6352
|
|
|
|
/* KM_PORTL2 */
|
|
#elif defined(CONFIG_KM_PORTL2)
|
|
#define CONFIG_HOSTNAME "portl2"
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
#define CONFIG_KM_PIGGY4_88E6061
|
|
|
|
/* KM_SUV31 */
|
|
#elif defined(CONFIG_KM_SUV31)
|
|
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
|
|
#define CONFIG_HOSTNAME "kmsuv31"
|
|
#undef CONFIG_SYS_KWD_CONFIG
|
|
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
|
|
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
|
|
#define CONFIG_KM_FPGA_CONFIG
|
|
#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048"
|
|
#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
|
|
#else
|
|
#error ("Board unsupported")
|
|
#endif
|
|
|
|
/* include common defines/options for all arm based Keymile boards */
|
|
#include "km/km_arm.h"
|
|
|
|
#if defined(CONFIG_KM_PIGGY4_88E6352)
|
|
/*
|
|
* Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
|
|
* an Marvell 88E6352 simple switch.
|
|
* In this case we have to change the default settings for the etherent mac.
|
|
* There is NO ethernet phy. The ARM and Switch are conencted directly over
|
|
* RGMII in MAC-MAC mode
|
|
* In this case 1GBit full duplex and autoneg off
|
|
*/
|
|
#define PORT_SERIAL_CONTROL_VALUE ( \
|
|
MVGBE_FORCE_LINK_PASS | \
|
|
MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
|
|
MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
|
|
MVGBE_ADV_NO_FLOW_CTRL | \
|
|
MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
|
|
MVGBE_FORCE_BP_MODE_NO_JAM | \
|
|
(1 << 9) /* Reserved bit has to be 1 */ | \
|
|
MVGBE_DO_NOT_FORCE_LINK_FAIL | \
|
|
MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
|
|
MVGBE_DTE_ADV_0 | \
|
|
MVGBE_MIIPHY_MAC_MODE | \
|
|
MVGBE_AUTO_NEG_NO_CHANGE | \
|
|
MVGBE_MAX_RX_PACKET_1552BYTE | \
|
|
MVGBE_CLR_EXT_LOOPBACK | \
|
|
MVGBE_SET_FULL_DUPLEX_MODE | \
|
|
MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
|
|
MVGBE_SET_GMII_SPEED_TO_1000 |\
|
|
MVGBE_SET_MII_SPEED_TO_100)
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_KM_PIGGY4_88E6061
|
|
/*
|
|
* Some keymile boards like mgcoge3un have their PIGGY4 connected via
|
|
* an Marvell 88E6061 simple switch.
|
|
* In this case we have to change the default settings for the
|
|
* ethernet phy connected to the kirkwood.
|
|
* In this case 100MB full duplex and autoneg off
|
|
*/
|
|
#define PORT_SERIAL_CONTROL_VALUE ( \
|
|
MVGBE_FORCE_LINK_PASS | \
|
|
MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
|
|
MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
|
|
MVGBE_ADV_NO_FLOW_CTRL | \
|
|
MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
|
|
MVGBE_FORCE_BP_MODE_NO_JAM | \
|
|
(1 << 9) /* Reserved bit has to be 1 */ | \
|
|
MVGBE_DO_NOT_FORCE_LINK_FAIL | \
|
|
MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
|
|
MVGBE_DTE_ADV_0 | \
|
|
MVGBE_MIIPHY_MAC_MODE | \
|
|
MVGBE_AUTO_NEG_NO_CHANGE | \
|
|
MVGBE_MAX_RX_PACKET_1552BYTE | \
|
|
MVGBE_CLR_EXT_LOOPBACK | \
|
|
MVGBE_SET_FULL_DUPLEX_MODE | \
|
|
MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
|
|
MVGBE_SET_GMII_SPEED_TO_10_100 |\
|
|
MVGBE_SET_MII_SPEED_TO_100)
|
|
#endif
|
|
|
|
#ifdef CONFIG_KM_DISABLE_PCI
|
|
#undef CONFIG_KIRKWOOD_PCIE_INIT
|
|
#endif
|
|
|
|
#endif /* _CONFIG_KM_KIRKWOOD */
|