d7869b2183
This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
213 lines
6.3 KiB
C
213 lines
6.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2015
|
|
* (C) Copyright 2014
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* Based on:
|
|
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* Configuration settings for the Freescale i.MX6Q SabreSD board.
|
|
*/
|
|
#ifndef __ARISTAINETOS_COMMON_CONFIG_H
|
|
#define __ARISTAINETOS_COMMON_CONFIG_H
|
|
|
|
#include "mx6_common.h"
|
|
|
|
#define CONFIG_MACH_TYPE 4501
|
|
#define CONFIG_MMCROOT "/dev/mmcblk0p1"
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M)
|
|
|
|
#define CONFIG_MXC_UART
|
|
|
|
/* MMC Configs */
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
|
|
#define CONFIG_FEC_MXC
|
|
#define IMX_FEC_BASE ENET_BASE_ADDR
|
|
#define CONFIG_ETHPRIME "FEC"
|
|
#define CONFIG_FEC_MXC_PHYADDR 0
|
|
|
|
#define CONFIG_SPI_FLASH_MTD
|
|
#define CONFIG_SF_DEFAULT_SPEED 20000000
|
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
|
#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"script=u-boot.scr\0" \
|
|
"fit_file=/boot/system.itb\0" \
|
|
"loadaddr=0x12000000\0" \
|
|
"fit_addr_r=0x14000000\0" \
|
|
"uboot=/boot/u-boot.imx\0" \
|
|
"uboot_sz=d0000\0" \
|
|
"rescue_sys_addr=f0000\0" \
|
|
"rescue_sys_length=f10000\0" \
|
|
"panel=lb07wv8\0" \
|
|
"splashpos=m,m\0" \
|
|
"console=" CONSOLE_DEV "\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
"set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
|
|
"default ${board_type}\0" \
|
|
"get_env=mw ${loadaddr} 0 0x20000;" \
|
|
"mmc rescan;" \
|
|
"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
|
|
"env import -t ${loadaddr}\0" \
|
|
"default_env=mw ${loadaddr} 0 0x20000;" \
|
|
"env export -t ${loadaddr} serial# ethaddr eth1addr " \
|
|
"board_type panel;" \
|
|
"env default -a;" \
|
|
"env import -t ${loadaddr}\0" \
|
|
"loadbootscript=" \
|
|
"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; " \
|
|
"source\0" \
|
|
"mmcpart=1\0" \
|
|
"mmcdev=0\0" \
|
|
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
|
|
"mmcargs=setenv bootargs console=${console},${baudrate} " \
|
|
"root=${mmcroot}\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run mmcargs addmtd addmisc set_fit_default;" \
|
|
"bootm ${fit_addr_r}\0" \
|
|
"mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
|
|
"${fit_file}\0" \
|
|
"mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
|
|
"${uboot}\0" \
|
|
"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
|
|
"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
|
|
"setexpr uboot_maxsize ${uboot_sz} - 400;" \
|
|
"mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
|
|
"run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
|
|
"sf write ${loadaddr} 400 ${filesize};" \
|
|
"sf read ${cmp_buf} 400 ${uboot_sz};" \
|
|
"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
|
|
"ubiboot=echo Booting from ubi ...; " \
|
|
"run ubiargs addmtd addmisc set_fit_default;" \
|
|
"bootm ${fit_addr_r}\0" \
|
|
"rescueargs=setenv bootargs console=${console},${baudrate} " \
|
|
"root=/dev/ram rw\0 " \
|
|
"rescueboot=echo Booting rescue system from NOR ...; " \
|
|
"run rescueargs addmtd addmisc set_fit_default;" \
|
|
"bootm ${fit_addr_r}\0" \
|
|
"rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
|
|
"${rescue_sys_length}; imi ${fit_addr_r}\0" \
|
|
CONFIG_EXTRA_ENV_BOARD_SETTINGS
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"mmc dev ${mmcdev};" \
|
|
"if mmc rescan; then " \
|
|
"if run loadbootscript; then " \
|
|
"run bootscript; " \
|
|
"else " \
|
|
"if run mmc_load_fit; then " \
|
|
"run mmcboot; " \
|
|
"else " \
|
|
"if run ubifs_load_fit; then " \
|
|
"run ubiboot; " \
|
|
"else " \
|
|
"if run rescue_load_fit; then " \
|
|
"run rescueboot; " \
|
|
"else " \
|
|
"echo RESCUE SYSTEM BOOT " \
|
|
"FAILURE;" \
|
|
"fi; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"else " \
|
|
"if run ubifs_load_fit; then " \
|
|
"run ubiboot; " \
|
|
"else " \
|
|
"if run rescue_load_fit; then " \
|
|
"run rescueboot; " \
|
|
"else " \
|
|
"echo RESCUE SYSTEM BOOT FAILURE;" \
|
|
"fi; " \
|
|
"fi; " \
|
|
"fi"
|
|
|
|
#define CONFIG_ARP_TIMEOUT 200UL
|
|
|
|
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
|
|
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* Environment organization */
|
|
#define CONFIG_ENV_SIZE (12 * 1024)
|
|
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
|
|
#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
|
|
#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
|
|
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
|
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
|
|
#define CONFIG_ENV_SECT_SIZE (0x010000)
|
|
#define CONFIG_ENV_OFFSET (0x0d0000)
|
|
#define CONFIG_ENV_OFFSET_REDUND (0x0e0000)
|
|
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
|
|
|
/* I2C */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_SYS_I2C_SLAVE 0x7f
|
|
#define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} }
|
|
|
|
/* NAND stuff */
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
|
|
/* DMA stuff, needed for GPMI/MXS NAND support */
|
|
|
|
/* RTC */
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
#define CONFIG_SYS_RTC_BUS_NUM 2
|
|
#define CONFIG_RTC_M41T11
|
|
|
|
/* USB Configs */
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
|
|
/* UBI support */
|
|
|
|
#define CONFIG_HW_WATCHDOG
|
|
#define CONFIG_IMX_WATCHDOG
|
|
|
|
/* Framebuffer */
|
|
#define CONFIG_VIDEO_IPUV3
|
|
/* check this console not needed, after test remove it */
|
|
#define CONFIG_VIDEO_BMP_RLE8
|
|
#define CONFIG_SPLASH_SCREEN
|
|
#define CONFIG_SPLASH_SCREEN_ALIGN
|
|
#define CONFIG_BMP_16BPP
|
|
#define CONFIG_VIDEO_LOGO
|
|
#define CONFIG_VIDEO_BMP_LOGO
|
|
#define CONFIG_IMX_VIDEO_SKIP
|
|
|
|
#define CONFIG_PWM_IMX
|
|
#define CONFIG_IMX6_PWM_PER_CLK 66000000
|
|
|
|
#endif /* __ARISTAINETOS_COMMON_CONFIG_H */
|