leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9736287173
u-boot/board/google/imx8mq_phanbell
History
Tom Rini 148b8bb4b6 imx: Finish migration of IMX_CONFIG to Kconfig 
- Provide a default Kconfig value of the default script
- Largely continue to define this via the board Kconfig file
- For the boards that select a script based on defconfig rather than
  TARGET, keep this within the defconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:46:37 -04:00
..
imx8mq_phanbell.c common: Drop asm/global_data.h from common header 2021-02-02 15:33:42 -05:00
Kconfig imx: Finish migration of IMX_CONFIG to Kconfig 2021-08-31 17:46:37 -04:00
lpddr4_timing_1g.c arm: imx: Add support for Google's Coral Dev Board 2020-05-01 13:49:15 +02:00
MAINTAINERS arm: imx: Add support for Google's Coral Dev Board 2020-05-01 13:49:15 +02:00
Makefile arm: imx: Add support for Google's Coral Dev Board 2020-05-01 13:49:15 +02:00
README arm: imx: Add support for Google's Coral Dev Board 2020-05-01 13:49:15 +02:00
spl.c common: Drop asm/global_data.h from common header 2021-02-02 15:33:42 -05:00

README 

U-Boot for Google's i.MX8MQ Phanbell board

Quick Start
===========
- Build the ARM Trusted firmware binary
- Get ddr and hdmi firmware
- Build U-Boot
- Boot

Get and Build the ARM Trusted firmware
======================================
Note: srctree is U-Boot source directory
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
branch: imx_4.19.35_1.0.0
$ make PLAT=imx8mq bl31
$ cp build/imx8mq/release/bl31.bin $(builddir)

Get the ddr and hdmi firmware
=============================
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
$ chmod +x firmware-imx-7.9.bin
$ ./firmware-imx-7.9.bin
$ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir)
$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)

Build U-Boot
============
$ export CROSS_COMPILE=aarch64-linux-gnu-
$ make imx8mq_phanbell_defconfig
$ make flash.bin

Burn the flash.bin to MicroSD card offset 33KB
$sudo dd if=flash.bin of=/dev/sd[x] bs=1K seek=33

Boot
====
Set Boot switch SW1: 1011 to boot from Micro SD.