u-boot/include/configs/poleg.h
Tom Rini eaf6ea6a1d Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR
- Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack
  pointer directly, otherwise we use the common calculation.
- On some platforms that were using the standard calculation but did not
  set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them.
- On a small number of platforms that were not subtracting
  GENERATED_GBL_DATA_SIZE do so now via the standard calculation.
- CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most
  board config header files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:19 -04:00

41 lines
1.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (c) 2021 Nuvoton Technology Corp.
*/
#ifndef __CONFIG_POLEG_H
#define __CONFIG_POLEG_H
#ifndef CONFIG_SYS_L2CACHE_OFF
#define CONFIG_SYS_L2_PL310 1
#define CONFIG_SYS_PL310_BASE 0xF03FC000 /* L2 - Cache Regs Base (4k Space)*/
#endif
#define CONFIG_SYS_BOOTMAPSZ (0x30 << 20)
#define CONFIG_SYS_SDRAM_BASE 0x0
/* Default environemnt variables */
#define CONFIG_SERVERIP 192.168.0.1
#define CONFIG_IPADDR 192.168.0.2
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0" \
"ethact=eth${eth_num}\0" \
"romboot=echo Booting from flash; echo +++ uimage at 0x${uimage_flash_addr}; " \
"echo Using bootargs: ${bootargs};bootm ${uimage_flash_addr}\0" \
"autostart=yes\0" \
"eth_num=0\0" \
"ethaddr=00:00:F7:A0:00:FC\0" \
"eth1addr=00:00:F7:A0:00:FD\0" \
"eth2addr=00:00:F7:A0:00:FE\0" \
"eth3addr=00:00:F7:A0:00:FF\0" \
"common_bootargs=setenv bootargs earlycon=${earlycon} root=/dev/ram " \
"console=${console} mem=${mem} ramdisk_size=48000 basemac=${ethaddr}\0" \
"sd_prog=fatload mmc 0 10000000 image-bmc; cp.b 10000000 80000000 ${filesize}\0" \
"sd_run=fatload mmc 0 10000000 image-bmc; bootm 10200000\0" \
"\0"
#endif