8d7f5edd86
The purpose of this change is to allow configuring TrustZone (TZC) memory permissions. For example, OP-TEE expects TZC regions to be configured in a very particular way. The API presented here is intended to allow exactly that. UCLASS support is not implemented, because it would not be too useful. Changing TZC permissions needs to be done with care, so as not to cut off access to memory we are currently using. One place where we can use this is at the end of SPL, right before jumping to OP-TEE. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
137 lines
3.4 KiB
C
137 lines
3.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Simple API for configuring TrustZone memory restrictions for TZC400
|
|
*/
|
|
|
|
#define LOG_CATEGORY LOGC_ARCH
|
|
|
|
#include <linux/iopoll.h>
|
|
#include <mach/tzc.h>
|
|
|
|
#define TZC_TIMEOUT_US 100
|
|
|
|
#define TZC_BUILD_CONFIG 0x00
|
|
#define TZC_ACTION 0x04
|
|
#define TZC_ACTION_NONE 0
|
|
#define TZC_ACTION_ERR 1
|
|
#define TZC_ACTION_INT 2
|
|
#define TZC_ACTION_INT_ERR 3
|
|
#define TZC_GATE_KEEPER 0x08
|
|
|
|
#define TZC_REGION0_OFFSET 0x100
|
|
#define TZC_REGION_CFG_SIZE 0x20
|
|
#define TZC_REGION1_OFFSET 0x120
|
|
#define TZC_REGION_BASE 0x00
|
|
#define TZC_REGION_TOP 0x08
|
|
#define TZC_REGION_ATTRIBUTE 0x10
|
|
#define TZC_REGION_ACCESS 0x14
|
|
|
|
static uint32_t tzc_read(uintptr_t tzc, size_t reg)
|
|
{
|
|
return readl(tzc + reg);
|
|
}
|
|
|
|
static void tzc_write(uintptr_t tzc, size_t reg, uint32_t val)
|
|
{
|
|
writel(val, tzc + reg);
|
|
}
|
|
|
|
static uint16_t tzc_config_get_active_filters(const struct tzc_region *cfg)
|
|
{
|
|
uint16_t active_filters = 0;
|
|
|
|
for ( ; cfg->top != 0; cfg++)
|
|
active_filters |= cfg->filters_mask;
|
|
|
|
return active_filters;
|
|
}
|
|
|
|
int tzc_configure(uintptr_t tzc, const struct tzc_region *cfg)
|
|
{
|
|
uintptr_t region = tzc + TZC_REGION1_OFFSET;
|
|
uint32_t nsid, attr_reg, active_filters;
|
|
int ret;
|
|
|
|
active_filters = tzc_config_get_active_filters(cfg);
|
|
if (active_filters == 0)
|
|
return -EINVAL;
|
|
|
|
ret = tzc_disable_filters(tzc, active_filters);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for ( ; cfg->top != 0; cfg++, region += TZC_REGION_CFG_SIZE) {
|
|
attr_reg = (cfg->sec_mode & 0x03) << 30;
|
|
attr_reg |= (cfg->filters_mask & 0x03) << 0;
|
|
nsid = cfg->nsec_id & 0xffff;
|
|
nsid |= nsid << 16;
|
|
|
|
tzc_write(region, TZC_REGION_BASE, cfg->base);
|
|
tzc_write(region, TZC_REGION_TOP, cfg->top);
|
|
tzc_write(region, TZC_REGION_ACCESS, nsid);
|
|
tzc_write(region, TZC_REGION_ATTRIBUTE, attr_reg);
|
|
}
|
|
|
|
tzc_write(tzc, TZC_ACTION, TZC_ACTION_ERR);
|
|
return tzc_enable_filters(tzc, active_filters);
|
|
}
|
|
|
|
int tzc_disable_filters(uintptr_t tzc, uint16_t filters_mask)
|
|
{
|
|
uint32_t gate = tzc_read(tzc, TZC_GATE_KEEPER);
|
|
uint32_t filter_status = filters_mask << 16;
|
|
|
|
gate &= ~filters_mask;
|
|
tzc_write(tzc, TZC_GATE_KEEPER, gate);
|
|
|
|
return readl_poll_timeout(tzc + TZC_GATE_KEEPER, gate,
|
|
(gate & filter_status) == 0, TZC_TIMEOUT_US);
|
|
}
|
|
|
|
int tzc_enable_filters(uintptr_t tzc, uint16_t filters_mask)
|
|
{
|
|
uint32_t gate = tzc_read(tzc, TZC_GATE_KEEPER);
|
|
uint32_t filter_status = filters_mask << 16;
|
|
|
|
gate |= filters_mask;
|
|
tzc_write(tzc, TZC_GATE_KEEPER, gate);
|
|
|
|
return readl_poll_timeout(tzc + TZC_GATE_KEEPER, gate,
|
|
(gate & filter_status) == filter_status,
|
|
TZC_TIMEOUT_US);
|
|
}
|
|
|
|
static const char *sec_access_str_from_attr(uint32_t attr)
|
|
{
|
|
const char *const sec_mode[] = { "none", "RO ", "WO ", "RW " };
|
|
|
|
return sec_mode[(attr >> 30) & 0x03];
|
|
}
|
|
|
|
void tzc_dump_config(uintptr_t tzc)
|
|
{
|
|
uint32_t build_config, base, top, attr, nsaid;
|
|
int num_regions, i;
|
|
uintptr_t region;
|
|
|
|
build_config = tzc_read(tzc, TZC_BUILD_CONFIG);
|
|
num_regions = ((build_config >> 0) & 0x1f) + 1;
|
|
|
|
for (i = 0; i < num_regions; i++) {
|
|
region = tzc + TZC_REGION0_OFFSET + i * TZC_REGION_CFG_SIZE;
|
|
|
|
base = tzc_read(region, TZC_REGION_BASE);
|
|
top = tzc_read(region, TZC_REGION_TOP);
|
|
attr = tzc_read(region, TZC_REGION_ATTRIBUTE);
|
|
nsaid = tzc_read(region, TZC_REGION_ACCESS);
|
|
|
|
if (attr == 0 && nsaid == 0)
|
|
continue;
|
|
|
|
log_info("TZC region %u: %08x->%08x - filters 0x%x\n",
|
|
i, base, top, (attr >> 0) & 0xf);
|
|
log_info("\t Secure access %s NSAID %08x\n",
|
|
sec_access_str_from_attr(attr), nsaid);
|
|
}
|
|
}
|