6df271a70f
Move code and defines only needed for CONFIG_STM32MP15x in stm32mp15x.c when low level init without TFABOOT is supported. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
346 lines
8.5 KiB
C
346 lines
8.5 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause
|
|
/*
|
|
* Copyright (C) 2021, STMicroelectronics - All Rights Reserved
|
|
*/
|
|
|
|
#define LOG_CATEGORY LOGC_ARCH
|
|
|
|
#include <common.h>
|
|
#include <env.h>
|
|
#include <log.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/bsec.h>
|
|
#include <asm/arch/stm32.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <dm/device.h>
|
|
#include <dm/uclass.h>
|
|
|
|
/* RCC register */
|
|
#define RCC_TZCR (STM32_RCC_BASE + 0x00)
|
|
#define RCC_BDCR (STM32_RCC_BASE + 0x0140)
|
|
#define RCC_MP_APB5ENSETR (STM32_RCC_BASE + 0x0208)
|
|
#define RCC_MP_AHB5ENSETR (STM32_RCC_BASE + 0x0210)
|
|
#define RCC_DBGCFGR (STM32_RCC_BASE + 0x080C)
|
|
|
|
#define RCC_BDCR_VSWRST BIT(31)
|
|
#define RCC_BDCR_RTCSRC GENMASK(17, 16)
|
|
|
|
#define RCC_DBGCFGR_DBGCKEN BIT(8)
|
|
|
|
/* DBGMCU register */
|
|
#define DBGMCU_IDC (STM32_DBGMCU_BASE + 0x00)
|
|
#define DBGMCU_APB4FZ1 (STM32_DBGMCU_BASE + 0x2C)
|
|
#define DBGMCU_APB4FZ1_IWDG2 BIT(2)
|
|
|
|
/* Security register */
|
|
#define ETZPC_TZMA1_SIZE (STM32_ETZPC_BASE + 0x04)
|
|
#define ETZPC_DECPROT0 (STM32_ETZPC_BASE + 0x10)
|
|
|
|
#define TZC_GATE_KEEPER (STM32_TZC_BASE + 0x008)
|
|
#define TZC_REGION_ATTRIBUTE0 (STM32_TZC_BASE + 0x110)
|
|
#define TZC_REGION_ID_ACCESS0 (STM32_TZC_BASE + 0x114)
|
|
|
|
#define TAMP_CR1 (STM32_TAMP_BASE + 0x00)
|
|
|
|
#define PWR_CR1 (STM32_PWR_BASE + 0x00)
|
|
#define PWR_MCUCR (STM32_PWR_BASE + 0x14)
|
|
#define PWR_CR1_DBP BIT(8)
|
|
#define PWR_MCUCR_SBF BIT(6)
|
|
|
|
/* GPIOZ registers */
|
|
#define GPIOZ_SECCFGR 0x54004030
|
|
|
|
/* DBGMCU register */
|
|
#define DBGMCU_IDC (STM32_DBGMCU_BASE + 0x00)
|
|
#define DBGMCU_IDC_DEV_ID_MASK GENMASK(11, 0)
|
|
#define DBGMCU_IDC_DEV_ID_SHIFT 0
|
|
#define DBGMCU_IDC_REV_ID_MASK GENMASK(31, 16)
|
|
#define DBGMCU_IDC_REV_ID_SHIFT 16
|
|
|
|
/* boot interface from Bootrom
|
|
* - boot instance = bit 31:16
|
|
* - boot device = bit 15:0
|
|
*/
|
|
#define BOOTROM_PARAM_ADDR 0x2FFC0078
|
|
#define BOOTROM_MODE_MASK GENMASK(15, 0)
|
|
#define BOOTROM_MODE_SHIFT 0
|
|
#define BOOTROM_INSTANCE_MASK GENMASK(31, 16)
|
|
#define BOOTROM_INSTANCE_SHIFT 16
|
|
|
|
/* Device Part Number (RPN) = OTP_DATA1 lower 8 bits */
|
|
#define RPN_SHIFT 0
|
|
#define RPN_MASK GENMASK(7, 0)
|
|
|
|
/* Package = bit 27:29 of OTP16 => STM32MP15_PKG defines
|
|
* - 100: LBGA448 (FFI) => AA = LFBGA 18x18mm 448 balls p. 0.8mm
|
|
* - 011: LBGA354 (LCI) => AB = LFBGA 16x16mm 359 balls p. 0.8mm
|
|
* - 010: TFBGA361 (FFC) => AC = TFBGA 12x12mm 361 balls p. 0.5mm
|
|
* - 001: TFBGA257 (LCC) => AD = TFBGA 10x10mm 257 balls p. 0.5mm
|
|
* - others: Reserved
|
|
*/
|
|
#define PKG_SHIFT 27
|
|
#define PKG_MASK GENMASK(2, 0)
|
|
|
|
static void security_init(void)
|
|
{
|
|
/* Disable the backup domain write protection */
|
|
/* the protection is enable at each reset by hardware */
|
|
/* And must be disable by software */
|
|
setbits_le32(PWR_CR1, PWR_CR1_DBP);
|
|
|
|
while (!(readl(PWR_CR1) & PWR_CR1_DBP))
|
|
;
|
|
|
|
/* If RTC clock isn't enable so this is a cold boot then we need
|
|
* to reset the backup domain
|
|
*/
|
|
if (!(readl(RCC_BDCR) & RCC_BDCR_RTCSRC)) {
|
|
setbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
|
|
while (!(readl(RCC_BDCR) & RCC_BDCR_VSWRST))
|
|
;
|
|
clrbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
|
|
}
|
|
|
|
/* allow non secure access in Write/Read for all peripheral */
|
|
writel(GENMASK(25, 0), ETZPC_DECPROT0);
|
|
|
|
/* Open SYSRAM for no secure access */
|
|
writel(0x0, ETZPC_TZMA1_SIZE);
|
|
|
|
/* enable TZC1 TZC2 clock */
|
|
writel(BIT(11) | BIT(12), RCC_MP_APB5ENSETR);
|
|
|
|
/* Region 0 set to no access by default */
|
|
/* bit 0 / 16 => nsaid0 read/write Enable
|
|
* bit 1 / 17 => nsaid1 read/write Enable
|
|
* ...
|
|
* bit 15 / 31 => nsaid15 read/write Enable
|
|
*/
|
|
writel(0xFFFFFFFF, TZC_REGION_ID_ACCESS0);
|
|
/* bit 30 / 31 => Secure Global Enable : write/read */
|
|
/* bit 0 / 1 => Region Enable for filter 0/1 */
|
|
writel(BIT(0) | BIT(1) | BIT(30) | BIT(31), TZC_REGION_ATTRIBUTE0);
|
|
|
|
/* Enable Filter 0 and 1 */
|
|
setbits_le32(TZC_GATE_KEEPER, BIT(0) | BIT(1));
|
|
|
|
/* RCC trust zone deactivated */
|
|
writel(0x0, RCC_TZCR);
|
|
|
|
/* TAMP: deactivate the internal tamper
|
|
* Bit 23 ITAMP8E: monotonic counter overflow
|
|
* Bit 20 ITAMP5E: RTC calendar overflow
|
|
* Bit 19 ITAMP4E: HSE monitoring
|
|
* Bit 18 ITAMP3E: LSE monitoring
|
|
* Bit 16 ITAMP1E: RTC power domain supply monitoring
|
|
*/
|
|
writel(0x0, TAMP_CR1);
|
|
|
|
/* GPIOZ: deactivate the security */
|
|
writel(BIT(0), RCC_MP_AHB5ENSETR);
|
|
writel(0x0, GPIOZ_SECCFGR);
|
|
}
|
|
|
|
/*
|
|
* Debug init
|
|
*/
|
|
void dbgmcu_init(void)
|
|
{
|
|
/*
|
|
* Freeze IWDG2 if Cortex-A7 is in debug mode
|
|
* done in TF-A for TRUSTED boot and
|
|
* DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE
|
|
*/
|
|
if (bsec_dbgswenable()) {
|
|
setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
|
|
setbits_le32(DBGMCU_APB4FZ1, DBGMCU_APB4FZ1_IWDG2);
|
|
}
|
|
}
|
|
|
|
void spl_board_init(void)
|
|
{
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
dbgmcu_init();
|
|
|
|
/* force probe of BSEC driver to shadow the upper OTP */
|
|
ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(stm32mp_bsec), &dev);
|
|
if (ret)
|
|
log_warning("BSEC probe failed: %d\n", ret);
|
|
}
|
|
|
|
/* get bootmode from ROM code boot context: saved in TAMP register */
|
|
static void update_bootmode(void)
|
|
{
|
|
u32 boot_mode;
|
|
u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR);
|
|
u32 bootrom_device, bootrom_instance;
|
|
|
|
/* enable TAMP clock = RTCAPBEN */
|
|
writel(BIT(8), RCC_MP_APB5ENSETR);
|
|
|
|
/* read bootrom context */
|
|
bootrom_device =
|
|
(bootrom_itf & BOOTROM_MODE_MASK) >> BOOTROM_MODE_SHIFT;
|
|
bootrom_instance =
|
|
(bootrom_itf & BOOTROM_INSTANCE_MASK) >> BOOTROM_INSTANCE_SHIFT;
|
|
boot_mode =
|
|
((bootrom_device << BOOT_TYPE_SHIFT) & BOOT_TYPE_MASK) |
|
|
((bootrom_instance << BOOT_INSTANCE_SHIFT) &
|
|
BOOT_INSTANCE_MASK);
|
|
|
|
/* save the boot mode in TAMP backup register */
|
|
clrsetbits_le32(TAMP_BOOT_CONTEXT,
|
|
TAMP_BOOT_MODE_MASK,
|
|
boot_mode << TAMP_BOOT_MODE_SHIFT);
|
|
}
|
|
|
|
/* weak function: STM32MP15x mach init for boot without TFA */
|
|
void stm32mp_cpu_init(void)
|
|
{
|
|
if (IS_ENABLED(CONFIG_SPL_BUILD)) {
|
|
security_init();
|
|
update_bootmode();
|
|
}
|
|
|
|
/* reset copro state in SPL, when used, or in U-Boot */
|
|
if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_SPL_BUILD)) {
|
|
/* Reset Coprocessor state unless it wakes up from Standby power mode */
|
|
if (!(readl(PWR_MCUCR) & PWR_MCUCR_SBF)) {
|
|
writel(TAMP_COPRO_STATE_OFF, TAMP_COPRO_STATE);
|
|
writel(0, TAMP_COPRO_RSC_TBL_ADDRESS);
|
|
}
|
|
}
|
|
}
|
|
|
|
static u32 read_idc(void)
|
|
{
|
|
/* DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE */
|
|
if (bsec_dbgswenable()) {
|
|
setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
|
|
|
|
return readl(DBGMCU_IDC);
|
|
}
|
|
|
|
return CPU_DEV_STM32MP15; /* STM32MP15x and unknown revision */
|
|
}
|
|
|
|
u32 get_cpu_dev(void)
|
|
{
|
|
return (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT;
|
|
}
|
|
|
|
u32 get_cpu_rev(void)
|
|
{
|
|
return (read_idc() & DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT;
|
|
}
|
|
|
|
/* Get Device Part Number (RPN) from OTP */
|
|
static u32 get_cpu_rpn(void)
|
|
{
|
|
return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK);
|
|
}
|
|
|
|
u32 get_cpu_type(void)
|
|
{
|
|
return (get_cpu_dev() << 16) | get_cpu_rpn();
|
|
}
|
|
|
|
/* Get Package options from OTP */
|
|
u32 get_cpu_package(void)
|
|
{
|
|
return get_otp(BSEC_OTP_PKG, PKG_SHIFT, PKG_MASK);
|
|
}
|
|
|
|
static const char * const soc_type[] = {
|
|
"????",
|
|
"151C", "151A", "151F", "151D",
|
|
"153C", "153A", "153F", "153D",
|
|
"157C", "157A", "157F", "157D"
|
|
};
|
|
|
|
static const char * const soc_pkg[] = { "??", "AD", "AC", "AB", "AA" };
|
|
static const char * const soc_rev[] = { "?", "A", "B", "Z" };
|
|
|
|
static void get_cpu_string_offsets(unsigned int *type, unsigned int *pkg,
|
|
unsigned int *rev)
|
|
{
|
|
u32 cpu_type = get_cpu_type();
|
|
u32 ct = cpu_type & ~(BIT(7) | BIT(0));
|
|
u32 cm = ((cpu_type & BIT(7)) >> 6) | (cpu_type & BIT(0));
|
|
u32 cp = get_cpu_package();
|
|
|
|
/* Bits 0 and 7 are the ACDF, 00:C 01:A 10:F 11:D */
|
|
switch (ct) {
|
|
case CPU_STM32MP151Cxx:
|
|
*type = cm + 1;
|
|
break;
|
|
case CPU_STM32MP153Cxx:
|
|
*type = cm + 5;
|
|
break;
|
|
case CPU_STM32MP157Cxx:
|
|
*type = cm + 9;
|
|
break;
|
|
default:
|
|
*type = 0;
|
|
break;
|
|
}
|
|
|
|
/* Package */
|
|
switch (cp) {
|
|
case STM32MP15_PKG_AA_LBGA448:
|
|
case STM32MP15_PKG_AB_LBGA354:
|
|
case STM32MP15_PKG_AC_TFBGA361:
|
|
case STM32MP15_PKG_AD_TFBGA257:
|
|
*pkg = cp;
|
|
break;
|
|
default:
|
|
*pkg = 0;
|
|
break;
|
|
}
|
|
|
|
/* Revision */
|
|
switch (get_cpu_rev()) {
|
|
case CPU_REV1:
|
|
*rev = 1;
|
|
break;
|
|
case CPU_REV2:
|
|
*rev = 2;
|
|
break;
|
|
case CPU_REV2_1:
|
|
*rev = 3;
|
|
break;
|
|
default:
|
|
*rev = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void get_soc_name(char name[SOC_NAME_SIZE])
|
|
{
|
|
unsigned int type, pkg, rev;
|
|
|
|
get_cpu_string_offsets(&type, &pkg, &rev);
|
|
|
|
snprintf(name, SOC_NAME_SIZE, "STM32MP%s%s Rev.%s",
|
|
soc_type[type], soc_pkg[pkg], soc_rev[rev]);
|
|
}
|
|
|
|
static void setup_soc_type_pkg_rev(void)
|
|
{
|
|
unsigned int type, pkg, rev;
|
|
|
|
get_cpu_string_offsets(&type, &pkg, &rev);
|
|
|
|
env_set("soc_type", soc_type[type]);
|
|
env_set("soc_pkg", soc_pkg[pkg]);
|
|
env_set("soc_rev", soc_rev[rev]);
|
|
}
|
|
|
|
/* weak function called in arch_misc_init */
|
|
void stm32mp_misc_init(void)
|
|
{
|
|
setup_soc_type_pkg_rev();
|
|
}
|