u-boot/configs/pg_wcom_seli8_update_defconfig
Tom Rini 93145335fb nxp: Make board/freescale/common/Kconfig safe to include once in arch/Kconfig
The way that we use this file currently means that we have to guard it
in every platform Kconfig.  But it is also required in all NXP
platforms, including non-reference platforms.  Make all options in it
have appropriate dependencies so that we can include it a single time
under arch/Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:02 -04:00

96 lines
2.6 KiB
Plaintext

CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_COUNTER_FREQUENCY=8333333
CONFIG_TARGET_PG_WCOM_SELI8=y
CONFIG_SYS_TEXT_BASE=0x60240000
CONFIG_SYS_MALLOC_LEN=0x1004000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_SYS_I2C_MXC_I2C1=y
CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_SYS_I2C_MXC_I2C3=y
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-seli8"
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_ENV_ADDR=0x60220000
CONFIG_AHCI=y
# CONFIG_DEEP_SLEEP is not set
CONFIG_KM_DEF_NETDEV="eth2"
CONFIG_KM_COMMON_ETH_INIT=y
CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3
CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y
CONFIG_PG_WCOM_UBOOT_UPDATE=y
CONFIG_SYS_MEMTEST_START=0x80000000
CONFIG_SYS_MEMTEST_END=0x9fffffff
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
CONFIG_SILENT_CONSOLE=y
CONFIG_EVENT=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_PBSIZE=532
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_CRAMFS=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash"
CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),128k(redenvred),128k(redenv),1m(redu-boot),-(ubi0);68000000.flash:-(ubi1)"
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_ENV_ADDR_REDUND=0x60200000
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="ethernet@2d90000"
CONFIG_VERSION_VARIABLE=y
CONFIG_DM=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_DDR_CLK_FREQ=50000000
CONFIG_SYS_FSL_DDR3=y
CONFIG_SYS_I2C_LEGACY=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_FLASH_CFI_MTD=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_FSL_IFC=y
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_PHY_MARVELL=y
CONFIG_PHY_FIXED=y
CONFIG_DM_ETH=y
CONFIG_DM_MDIO=y
CONFIG_PHY_GIGE=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
CONFIG_SYS_QE_FW_ADDR=0x60020000
CONFIG_SCSI_AHCI_PLAT=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y