657006a1c4
remove MACH_TYPE definitions in config file, as they come from the defconfig. Signed-off-by: Heiko Schocher <hs@denx.de>
246 lines
6.9 KiB
C
246 lines
6.9 KiB
C
/*
|
|
* Common board functions for Siemens TAURUS (AT91SAM9G20) based boards
|
|
* (C) Copyright 2013 Siemens AG
|
|
*
|
|
* Based on:
|
|
* U-Boot file: include/configs/at91sam9260ek.h
|
|
*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* SoC must be defined first, before hardware.h is included.
|
|
* In this case SoC is defined in boards.cfg.
|
|
*/
|
|
#include <asm/hardware.h>
|
|
|
|
#define CONFIG_SYS_GENERIC_BOARD
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
#define CONFIG_SYS_THUMB_BUILD
|
|
#define CONFIG_SYS_ICACHE_OFF
|
|
#define CONFIG_SYS_DCACHE_OFF
|
|
#endif
|
|
/*
|
|
* Warning: changing CONFIG_SYS_TEXT_BASE requires
|
|
* adapting the initial boot program.
|
|
* Since the linker has to swallow that define, we must use a pure
|
|
* hex number here!
|
|
*/
|
|
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0x21000000
|
|
|
|
/* ARM asynchronous clock */
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */
|
|
|
|
/* Misc CPU related */
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
|
|
#define CONFIG_CMD_BOOTZ
|
|
#define CONFIG_OF_LIBFDT
|
|
|
|
/* general purpose I/O */
|
|
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
|
|
#define CONFIG_AT91_GPIO
|
|
#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
|
|
|
|
/* serial console */
|
|
#define CONFIG_ATMEL_USART
|
|
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
|
#define CONFIG_USART_ID ATMEL_ID_SYS
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
#undef CONFIG_CMD_BDI
|
|
#undef CONFIG_CMD_FPGA
|
|
#undef CONFIG_CMD_IMI
|
|
#undef CONFIG_CMD_IMLS
|
|
#undef CONFIG_CMD_LOADS
|
|
#undef CONFIG_CMD_SOURCE
|
|
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_NAND
|
|
|
|
/*
|
|
* SDRAM: 1 bank, min 32, max 128 MB
|
|
* Initialized before u-boot gets started.
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
|
|
#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024)
|
|
|
|
/*
|
|
* Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
|
|
* leaving the correct space for initial global data structure above
|
|
* that address while providing maximum stack area below.
|
|
*/
|
|
# define CONFIG_SYS_INIT_SP_ADDR \
|
|
(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
|
|
|
|
/* NAND flash */
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_NAND_ATMEL
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
|
|
#define CONFIG_SYS_NAND_DBW_8
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
|
|
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
|
|
#endif
|
|
|
|
/* NOR flash - no real flash on this board */
|
|
#define CONFIG_SYS_NO_FLASH 1
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_MACB
|
|
#define CONFIG_RMII
|
|
#define CONFIG_AT91_WANTS_COMMON_PHY
|
|
|
|
#define CONFIG_AT91SAM9_WATCHDOG
|
|
#if !defined(CONFIG_SPL_BUILD)
|
|
/* Enable the watchdog */
|
|
#define CONFIG_HW_WATCHDOG
|
|
#endif
|
|
|
|
/* USB */
|
|
#if defined(CONFIG_BOARD_TAURUS)
|
|
#define CONFIG_USB_ATMEL
|
|
#define CONFIG_USB_OHCI_NEW
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
|
#define CONFIG_USB_STORAGE
|
|
#endif
|
|
|
|
/* SPI EEPROM */
|
|
#define CONFIG_SPI
|
|
#define CONFIG_CMD_SPI
|
|
#define CONFIG_CMD_SF
|
|
#define CONFIG_SPI_FLASH
|
|
#define CONFIG_ATMEL_SPI
|
|
#define CONFIG_SPI_FLASH_STMICRO
|
|
#define TAURUS_SPI_MASK (1 << 4)
|
|
#define TAURUS_SPI_CS_PIN AT91_PIN_PA3
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
/* SPL related */
|
|
#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */
|
|
#define CONFIG_SPL_SPI_SUPPORT
|
|
#define CONFIG_SPL_SPI_FLASH_SUPPORT
|
|
#define CONFIG_SPL_SPI_LOAD
|
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
|
|
|
|
#define CONFIG_SF_DEFAULT_BUS 0
|
|
#define CONFIG_SF_DEFAULT_SPEED 10000000
|
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
|
#endif
|
|
|
|
/* load address */
|
|
#define CONFIG_SYS_LOAD_ADDR 0x22000000
|
|
|
|
/* bootstrap in spi flash , u-boot + env + linux in nandflash */
|
|
#define CONFIG_ENV_IS_IN_NAND
|
|
#define CONFIG_ENV_OFFSET 0x100000
|
|
#define CONFIG_ENV_OFFSET_REDUND 0x180000
|
|
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
|
|
#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"
|
|
#define CONFIG_BOOTARGS \
|
|
"console=ttyS0,115200 earlyprintk " \
|
|
"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
|
|
"256k(env),256k(env_redundant),256k(spare)," \
|
|
"512k(dtb),6M(kernel)ro,-(rootfs) " \
|
|
"root=/dev/mtdblock7 rw rootfstype=jffs2"
|
|
|
|
#define CONFIG_SYS_PROMPT "U-Boot> "
|
|
#define CONFIG_SYS_CBSIZE 256
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
#define CONFIG_SYS_PBSIZE \
|
|
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_CMDLINE_EDITING
|
|
#define CONFIG_AUTO_COMPLETE
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN \
|
|
ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
|
|
|
|
/* Defines for SPL */
|
|
#define CONFIG_SPL_FRAMEWORK
|
|
#define CONFIG_SPL_TEXT_BASE 0x0
|
|
#define CONFIG_SPL_MAX_SIZE (14 * 1024)
|
|
#define CONFIG_SPL_STACK (16 * 1024)
|
|
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
|
|
CONFIG_SYS_MALLOC_LEN)
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
|
|
|
|
#define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE
|
|
#define CONFIG_SPL_BSS_MAX_SIZE (3 * 1024)
|
|
|
|
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
|
#define CONFIG_SPL_SERIAL_SUPPORT
|
|
|
|
#define CONFIG_SPL_BOARD_INIT
|
|
#define CONFIG_SPL_GPIO_SUPPORT
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
|
|
#define CONFIG_SPL_NAND_SUPPORT
|
|
#define CONFIG_SYS_USE_NANDFLASH 1
|
|
#define CONFIG_SPL_NAND_DRIVERS
|
|
#define CONFIG_SPL_NAND_BASE
|
|
#define CONFIG_SPL_NAND_ECC
|
|
#define CONFIG_SPL_NAND_RAW_ONLY
|
|
#define CONFIG_SPL_NAND_SOFTECC
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
|
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
|
|
#define CONFIG_SYS_NAND_SIZE (256*1024*1024)
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
|
|
CONFIG_SYS_NAND_PAGE_SIZE)
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
|
#define CONFIG_SYS_NAND_ECCSIZE 256
|
|
#define CONFIG_SYS_NAND_ECCBYTES 3
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
|
|
48, 49, 50, 51, 52, 53, 54, 55, \
|
|
56, 57, 58, 59, 60, 61, 62, 63, }
|
|
|
|
|
|
#define CONFIG_SPL_ATMEL_SIZE
|
|
#define CONFIG_SYS_MASTER_CLOCK 132096000
|
|
#define AT91_PLL_LOCK_TIMEOUT 1000000
|
|
#define CONFIG_SYS_AT91_PLLA 0x202A3F01
|
|
#define CONFIG_SYS_MCKR 0x1300
|
|
#define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR)
|
|
#define CONFIG_SYS_AT91_PLLB 0x10193F05
|
|
#endif
|