bccaa476f6
U-Boot names the Raspberry Pi board rpi_b. This means that the common
expression for DTB filename ${soc}-${board}.dtb expands to
bcm2835-rpi_b.dtb. However, the DTB generated by the Linux kernel is
bcm2835-rpi-b.dtb. Set $fdtfile in U-Boot's environment so that scripts
look for the correct DTB filename.
An alternative would be to rename the U-Boot board to rpi-b. However,
that change would be far more invasive, and end up affecting users (i.e
they'd have to change their U-Boot build commands).
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
184 lines
5.4 KiB
C
184 lines
5.4 KiB
C
/*
|
|
* (C) Copyright 2012 Stephen Warren
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <asm/sizes.h>
|
|
|
|
/* Architecture, CPU, etc.*/
|
|
#define CONFIG_ARM1176
|
|
#define CONFIG_BCM2835
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
#define CONFIG_SYS_DCACHE_OFF
|
|
/*
|
|
* 2835 is a SKU in a series for which the 2708 is the first or primary SoC,
|
|
* so 2708 has historically been used rather than a dedicated 2835 ID.
|
|
*/
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708
|
|
|
|
/* Memory layout */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_TEXT_BASE 0x00008000
|
|
#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
|
|
/*
|
|
* The board really has 256M. However, the VC (VideoCore co-processor) shares
|
|
* the RAM, and uses a configurable portion at the top. We tell U-Boot that a
|
|
* smaller amount of RAM is present in order to avoid stomping on the area
|
|
* the VC uses.
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_SIZE SZ_128M
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
|
|
CONFIG_SYS_SDRAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_MALLOC_LEN SZ_4M
|
|
#define CONFIG_SYS_MEMTEST_START 0x00100000
|
|
#define CONFIG_SYS_MEMTEST_END 0x00200000
|
|
#define CONFIG_LOADADDR 0x00200000
|
|
|
|
/* Flash */
|
|
#define CONFIG_SYS_NO_FLASH
|
|
|
|
/* Devices */
|
|
/* GPIO */
|
|
#define CONFIG_BCM2835_GPIO
|
|
/* LCD */
|
|
#define CONFIG_LCD
|
|
#define CONFIG_LCD_DT_SIMPLEFB
|
|
#define LCD_BPP LCD_COLOR16
|
|
/*
|
|
* Prevent allocation of RAM for FB; the real FB address is queried
|
|
* dynamically from the VideoCore co-processor, and comes from RAM
|
|
* not owned by the ARM CPU.
|
|
*/
|
|
#define CONFIG_FB_ADDR 0
|
|
#define CONFIG_VIDEO_BCM2835
|
|
#define CONFIG_SYS_WHITE_ON_BLACK
|
|
|
|
/* SD/MMC configuration */
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_MMC
|
|
#define CONFIG_SDHCI
|
|
#define CONFIG_MMC_SDHCI_IO_ACCESSORS
|
|
#define CONFIG_BCM2835_SDHCI
|
|
|
|
/* Console UART */
|
|
#define CONFIG_PL011_SERIAL
|
|
#define CONFIG_PL011_CLOCK 3000000
|
|
#define CONFIG_PL01x_PORTS { (void *)0x20201000 }
|
|
#define CONFIG_CONS_INDEX 0
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
/* Console configuration */
|
|
#define CONFIG_SYS_CBSIZE 1024
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
|
|
/* Environment */
|
|
#define CONFIG_ENV_SIZE SZ_16K
|
|
#define CONFIG_ENV_IS_NOWHERE
|
|
#define CONFIG_ENV_VARS_UBOOT_CONFIG
|
|
#define CONFIG_SYS_LOAD_ADDR 0x1000000
|
|
#define CONFIG_CONSOLE_MUX
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
|
/*
|
|
* Memory layout for where various images get loaded by boot scripts:
|
|
*
|
|
* scriptaddr can be pretty much anywhere that doesn't conflict with something
|
|
* else. Put it low in memory to avoid conflicts.
|
|
*
|
|
* kernel_addr_r must be within the first 128M of RAM in order for the
|
|
* kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
|
|
* decompress itself to 0x8000 after the start of RAM, kernel_addr_r
|
|
* should not overlap that area, or the kernel will have to copy itself
|
|
* somewhere else before decompression. Similarly, the address of any other
|
|
* data passed to the kernel shouldn't overlap the start of RAM. Pushing
|
|
* this up to 16M allows for a sizable kernel to be decompressed below the
|
|
* compressed load address.
|
|
*
|
|
* fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
|
|
* the compressed kernel to be up to 16M too.
|
|
*
|
|
* ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
|
|
* for the FDT/DTB to be up to 1M, which is hopefully plenty.
|
|
*/
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"stdin=serial\0" \
|
|
"stderr=serial,lcd\0" \
|
|
"stdout=serial,lcd\0" \
|
|
"scriptaddr=0x00000000\0" \
|
|
"kernel_addr_r=0x01000000\0" \
|
|
"fdt_addr_r=0x02000000\0" \
|
|
"fdtfile=bcm2835-rpi-b.dtb\0" \
|
|
"ramdisk_addr_r=0x02100000\0" \
|
|
"boot_targets=mmc0\0" \
|
|
\
|
|
"script_boot=" \
|
|
"if fatload ${devtype} ${devnum}:1 " \
|
|
"${scriptaddr} boot.scr.uimg; then " \
|
|
"source ${scriptaddr}; " \
|
|
"fi;\0" \
|
|
\
|
|
"mmc_boot=" \
|
|
"setenv devtype mmc; " \
|
|
"if mmc dev ${devnum}; then " \
|
|
"run script_boot; " \
|
|
"fi\0" \
|
|
\
|
|
"bootcmd_mmc0=setenv devnum 0; run mmc_boot\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"for target in ${boot_targets}; do run bootcmd_${target}; done"
|
|
|
|
#define CONFIG_BOOTDELAY 2
|
|
|
|
/* Shell */
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
#define CONFIG_SYS_MAXARGS 8
|
|
#define CONFIG_SYS_PROMPT "U-Boot> "
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_CMDLINE_EDITING
|
|
#define CONFIG_COMMAND_HISTORY
|
|
#define CONFIG_AUTO_COMPLETE
|
|
|
|
/* Commands */
|
|
#include <config_cmd_default.h>
|
|
#define CONFIG_CMD_BOOTZ
|
|
#define CONFIG_CMD_GPIO
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_PARTITION_UUIDS
|
|
#define CONFIG_CMD_PART
|
|
#define CONFIG_CMD_FS_GENERIC
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_EXT
|
|
/* Some things don't make sense on this HW or yet */
|
|
#undef CONFIG_CMD_FPGA
|
|
#undef CONFIG_CMD_NET
|
|
#undef CONFIG_CMD_NFS
|
|
#undef CONFIG_CMD_SAVEENV
|
|
|
|
/* Device tree support for bootm/bootz */
|
|
#define CONFIG_OF_LIBFDT
|
|
#define CONFIG_OF_BOARD_SETUP
|
|
/* ATAGs support for bootm/bootz */
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
#endif
|