f10643cf8a
At present ofnode is present in the device even if it is never used. With of-platdata this field is not used, so can be removed. In preparation for this, change the access to go through inline functions. Signed-off-by: Simon Glass <sjg@chromium.org>
243 lines
6.0 KiB
C
243 lines
6.0 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 Marvell International Ltd.
|
|
*
|
|
* (C) Copyright 2011
|
|
* eInfochips Ltd. <www.einfochips.com>
|
|
* Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
|
|
*
|
|
* (C) Copyright 2010
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
*/
|
|
|
|
#include <dm.h>
|
|
#include <pci.h>
|
|
#include <pci_ids.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/compat.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/* Returns the bit value to write or read based on the offset */
|
|
#define GPIO_BIT(x) BIT_ULL((x) & 0x3f)
|
|
|
|
#define GPIO_RX_DAT 0x00
|
|
#define GPIO_TX_SET 0x08
|
|
#define GPIO_TX_CLR 0x10
|
|
#define GPIO_CONST 0x90 /* OcteonTX only */
|
|
|
|
/* Offset to register-set for 2nd GPIOs (> 63), OcteonTX only */
|
|
#define GPIO1_OFFSET 0x1400
|
|
|
|
/* GPIO_CONST register bits */
|
|
#define GPIO_CONST_GPIOS_MASK GENMASK_ULL(7, 0)
|
|
|
|
/* GPIO_BIT_CFG register bits */
|
|
#define GPIO_BIT_CFG_TX_OE BIT_ULL(0)
|
|
#define GPIO_BIT_CFG_PIN_XOR BIT_ULL(1)
|
|
#define GPIO_BIT_CFG_INT_EN BIT_ULL(2)
|
|
#define GPIO_BIT_CFG_PIN_SEL_MASK GENMASK_ULL(26, 16)
|
|
|
|
enum {
|
|
PROBE_PCI = 0, /* PCI based probing */
|
|
PROBE_DT, /* DT based probing */
|
|
};
|
|
|
|
struct octeon_gpio_data {
|
|
int probe;
|
|
u32 reg_offs;
|
|
u32 gpio_bit_cfg_offs;
|
|
};
|
|
|
|
struct octeon_gpio {
|
|
void __iomem *base;
|
|
const struct octeon_gpio_data *data;
|
|
};
|
|
|
|
/* Returns the offset to the output register based on the offset and value */
|
|
static u32 gpio_tx_reg(int offset, int value)
|
|
{
|
|
u32 ret;
|
|
|
|
ret = value ? GPIO_TX_SET : GPIO_TX_CLR;
|
|
if (offset > 63)
|
|
ret += GPIO1_OFFSET;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Returns the offset to the input data register based on the offset */
|
|
static u32 gpio_rx_dat_reg(int offset)
|
|
{
|
|
u32 ret;
|
|
|
|
ret = GPIO_RX_DAT;
|
|
if (offset > 63)
|
|
ret += GPIO1_OFFSET;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int octeon_gpio_dir_input(struct udevice *dev, unsigned int offset)
|
|
{
|
|
struct octeon_gpio *gpio = dev_get_priv(dev);
|
|
|
|
debug("%s(%s, %u)\n", __func__, dev->name, offset);
|
|
clrbits_64(gpio->base + gpio->data->gpio_bit_cfg_offs + 8 * offset,
|
|
GPIO_BIT_CFG_TX_OE | GPIO_BIT_CFG_PIN_XOR |
|
|
GPIO_BIT_CFG_INT_EN | GPIO_BIT_CFG_PIN_SEL_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int octeon_gpio_dir_output(struct udevice *dev, unsigned int offset,
|
|
int value)
|
|
{
|
|
struct octeon_gpio *gpio = dev_get_priv(dev);
|
|
|
|
debug("%s(%s, %u, %d)\n", __func__, dev->name, offset, value);
|
|
writeq(GPIO_BIT(offset), gpio->base + gpio->data->reg_offs +
|
|
gpio_tx_reg(offset, value));
|
|
|
|
clrsetbits_64(gpio->base + gpio->data->gpio_bit_cfg_offs + 8 * offset,
|
|
GPIO_BIT_CFG_PIN_SEL_MASK | GPIO_BIT_CFG_INT_EN,
|
|
GPIO_BIT_CFG_TX_OE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int octeon_gpio_get_value(struct udevice *dev, unsigned int offset)
|
|
{
|
|
struct octeon_gpio *gpio = dev_get_priv(dev);
|
|
u64 reg = readq(gpio->base + gpio->data->reg_offs +
|
|
gpio_rx_dat_reg(offset));
|
|
|
|
debug("%s(%s, %u): value: %d\n", __func__, dev->name, offset,
|
|
!!(reg & GPIO_BIT(offset)));
|
|
|
|
return !!(reg & GPIO_BIT(offset));
|
|
}
|
|
|
|
static int octeon_gpio_set_value(struct udevice *dev,
|
|
unsigned int offset, int value)
|
|
{
|
|
struct octeon_gpio *gpio = dev_get_priv(dev);
|
|
|
|
debug("%s(%s, %u, %d)\n", __func__, dev->name, offset, value);
|
|
writeq(GPIO_BIT(offset), gpio->base + gpio->data->reg_offs +
|
|
gpio_tx_reg(offset, value));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int octeon_gpio_get_function(struct udevice *dev, unsigned int offset)
|
|
{
|
|
struct octeon_gpio *gpio = dev_get_priv(dev);
|
|
u64 val = readq(gpio->base + gpio->data->gpio_bit_cfg_offs +
|
|
8 * offset);
|
|
int pin_sel;
|
|
|
|
debug("%s(%s, %u): GPIO_BIT_CFG: 0x%llx\n", __func__, dev->name,
|
|
offset, val);
|
|
pin_sel = FIELD_GET(GPIO_BIT_CFG_PIN_SEL_MASK, val);
|
|
if (pin_sel)
|
|
return GPIOF_FUNC;
|
|
else if (val & GPIO_BIT_CFG_TX_OE)
|
|
return GPIOF_OUTPUT;
|
|
else
|
|
return GPIOF_INPUT;
|
|
}
|
|
|
|
static int octeon_gpio_xlate(struct udevice *dev, struct gpio_desc *desc,
|
|
struct ofnode_phandle_args *args)
|
|
{
|
|
if (args->args_count < 1)
|
|
return -EINVAL;
|
|
|
|
desc->offset = args->args[0];
|
|
desc->flags = 0;
|
|
if (args->args_count > 1) {
|
|
if (args->args[1] & GPIO_ACTIVE_LOW)
|
|
desc->flags |= GPIOD_ACTIVE_LOW;
|
|
/* In the future add tri-state flag support */
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_gpio_ops octeon_gpio_ops = {
|
|
.direction_input = octeon_gpio_dir_input,
|
|
.direction_output = octeon_gpio_dir_output,
|
|
.get_value = octeon_gpio_get_value,
|
|
.set_value = octeon_gpio_set_value,
|
|
.get_function = octeon_gpio_get_function,
|
|
.xlate = octeon_gpio_xlate,
|
|
};
|
|
|
|
static int octeon_gpio_probe(struct udevice *dev)
|
|
{
|
|
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
struct octeon_gpio *priv = dev_get_priv(dev);
|
|
char *end;
|
|
|
|
priv->data = (const struct octeon_gpio_data *)dev_get_driver_data(dev);
|
|
|
|
if (priv->data->probe == PROBE_PCI) {
|
|
priv->base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0,
|
|
PCI_REGION_MEM);
|
|
uc_priv->gpio_count = readq(priv->base +
|
|
priv->data->reg_offs + GPIO_CONST) &
|
|
GPIO_CONST_GPIOS_MASK;
|
|
} else {
|
|
priv->base = dev_remap_addr(dev);
|
|
uc_priv->gpio_count = ofnode_read_u32_default(dev_ofnode(dev),
|
|
"nr-gpios", 32);
|
|
}
|
|
|
|
if (!priv->base) {
|
|
debug("%s(%s): Could not get base address\n",
|
|
__func__, dev->name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
uc_priv->bank_name = strdup(dev->name);
|
|
end = strchr(uc_priv->bank_name, '@');
|
|
end[0] = 'A' + dev_seq(dev);
|
|
end[1] = '\0';
|
|
|
|
debug("%s(%s): base address: %p, pin count: %d\n",
|
|
__func__, dev->name, priv->base, uc_priv->gpio_count);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct octeon_gpio_data gpio_octeon_data = {
|
|
.probe = PROBE_DT,
|
|
.reg_offs = 0x80,
|
|
.gpio_bit_cfg_offs = 0x100,
|
|
};
|
|
|
|
static const struct octeon_gpio_data gpio_octeontx_data = {
|
|
.probe = PROBE_PCI,
|
|
.reg_offs = 0x00,
|
|
.gpio_bit_cfg_offs = 0x400,
|
|
};
|
|
|
|
static const struct udevice_id octeon_gpio_ids[] = {
|
|
{ .compatible = "cavium,thunder-8890-gpio",
|
|
.data = (ulong)&gpio_octeontx_data },
|
|
{ .compatible = "cavium,octeon-7890-gpio",
|
|
.data = (ulong)&gpio_octeon_data },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(octeon_gpio) = {
|
|
.name = "octeon_gpio",
|
|
.id = UCLASS_GPIO,
|
|
.of_match = of_match_ptr(octeon_gpio_ids),
|
|
.probe = octeon_gpio_probe,
|
|
.priv_auto = sizeof(struct octeon_gpio),
|
|
.ops = &octeon_gpio_ops,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|