u-boot/include/linux/apm_bios.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

212 lines
5.1 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
#ifndef _LINUX_APM_H
#define _LINUX_APM_H
/*
* Include file for the interface to an APM BIOS
* Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
*/
#include <linux/types.h>
typedef unsigned short apm_event_t;
typedef unsigned short apm_eventinfo_t;
struct apm_bios_info {
__u16 version;
__u16 cseg;
__u32 offset;
__u16 cseg_16;
__u16 dseg;
__u16 flags;
__u16 cseg_len;
__u16 cseg_16_len;
__u16 dseg_len;
};
#ifdef __KERNEL__
#define APM_CS (GDT_ENTRY_APMBIOS_BASE * 8)
#define APM_CS_16 (APM_CS + 8)
#define APM_DS (APM_CS_16 + 8)
/* Results of APM Installation Check */
#define APM_16_BIT_SUPPORT 0x0001
#define APM_32_BIT_SUPPORT 0x0002
#define APM_IDLE_SLOWS_CLOCK 0x0004
#define APM_BIOS_DISABLED 0x0008
#define APM_BIOS_DISENGAGED 0x0010
/*
* Data for APM that is persistent across module unload/load
*/
struct apm_info {
struct apm_bios_info bios;
unsigned short connection_version;
int get_power_status_broken;
int get_power_status_swabinminutes;
int allow_ints;
int forbid_idle;
int realmode_power_off;
int disabled;
};
/*
* The APM function codes
*/
#define APM_FUNC_INST_CHECK 0x5300
#define APM_FUNC_REAL_CONN 0x5301
#define APM_FUNC_16BIT_CONN 0x5302
#define APM_FUNC_32BIT_CONN 0x5303
#define APM_FUNC_DISCONN 0x5304
#define APM_FUNC_IDLE 0x5305
#define APM_FUNC_BUSY 0x5306
#define APM_FUNC_SET_STATE 0x5307
#define APM_FUNC_ENABLE_PM 0x5308
#define APM_FUNC_RESTORE_BIOS 0x5309
#define APM_FUNC_GET_STATUS 0x530a
#define APM_FUNC_GET_EVENT 0x530b
#define APM_FUNC_GET_STATE 0x530c
#define APM_FUNC_ENABLE_DEV_PM 0x530d
#define APM_FUNC_VERSION 0x530e
#define APM_FUNC_ENGAGE_PM 0x530f
#define APM_FUNC_GET_CAP 0x5310
#define APM_FUNC_RESUME_TIMER 0x5311
#define APM_FUNC_RESUME_ON_RING 0x5312
#define APM_FUNC_TIMER 0x5313
/*
* Function code for APM_FUNC_RESUME_TIMER
*/
#define APM_FUNC_DISABLE_TIMER 0
#define APM_FUNC_GET_TIMER 1
#define APM_FUNC_SET_TIMER 2
/*
* Function code for APM_FUNC_RESUME_ON_RING
*/
#define APM_FUNC_DISABLE_RING 0
#define APM_FUNC_ENABLE_RING 1
#define APM_FUNC_GET_RING 2
/*
* Function code for APM_FUNC_TIMER_STATUS
*/
#define APM_FUNC_TIMER_DISABLE 0
#define APM_FUNC_TIMER_ENABLE 1
#define APM_FUNC_TIMER_GET 2
/*
* in arch/i386/kernel/setup.c
*/
extern struct apm_info apm_info;
#endif /* __KERNEL__ */
/*
* Power states
*/
#define APM_STATE_READY 0x0000
#define APM_STATE_STANDBY 0x0001
#define APM_STATE_SUSPEND 0x0002
#define APM_STATE_OFF 0x0003
#define APM_STATE_BUSY 0x0004
#define APM_STATE_REJECT 0x0005
#define APM_STATE_OEM_SYS 0x0020
#define APM_STATE_OEM_DEV 0x0040
#define APM_STATE_DISABLE 0x0000
#define APM_STATE_ENABLE 0x0001
#define APM_STATE_DISENGAGE 0x0000
#define APM_STATE_ENGAGE 0x0001
/*
* Events (results of Get PM Event)
*/
#define APM_SYS_STANDBY 0x0001
#define APM_SYS_SUSPEND 0x0002
#define APM_NORMAL_RESUME 0x0003
#define APM_CRITICAL_RESUME 0x0004
#define APM_LOW_BATTERY 0x0005
#define APM_POWER_STATUS_CHANGE 0x0006
#define APM_UPDATE_TIME 0x0007
#define APM_CRITICAL_SUSPEND 0x0008
#define APM_USER_STANDBY 0x0009
#define APM_USER_SUSPEND 0x000a
#define APM_STANDBY_RESUME 0x000b
#define APM_CAPABILITY_CHANGE 0x000c
/*
* Error codes
*/
#define APM_SUCCESS 0x00
#define APM_DISABLED 0x01
#define APM_CONNECTED 0x02
#define APM_NOT_CONNECTED 0x03
#define APM_16_CONNECTED 0x05
#define APM_16_UNSUPPORTED 0x06
#define APM_32_CONNECTED 0x07
#define APM_32_UNSUPPORTED 0x08
#define APM_BAD_DEVICE 0x09
#define APM_BAD_PARAM 0x0a
#define APM_NOT_ENGAGED 0x0b
#define APM_BAD_FUNCTION 0x0c
#define APM_RESUME_DISABLED 0x0d
#define APM_NO_ERROR 0x53
#define APM_BAD_STATE 0x60
#define APM_NO_EVENTS 0x80
#define APM_NOT_PRESENT 0x86
/*
* APM Device IDs
*/
#define APM_DEVICE_BIOS 0x0000
#define APM_DEVICE_ALL 0x0001
#define APM_DEVICE_DISPLAY 0x0100
#define APM_DEVICE_STORAGE 0x0200
#define APM_DEVICE_PARALLEL 0x0300
#define APM_DEVICE_SERIAL 0x0400
#define APM_DEVICE_NETWORK 0x0500
#define APM_DEVICE_PCMCIA 0x0600
#define APM_DEVICE_BATTERY 0x8000
#define APM_DEVICE_OEM 0xe000
#define APM_DEVICE_OLD_ALL 0xffff
#define APM_DEVICE_CLASS 0x00ff
#define APM_DEVICE_MASK 0xff00
#ifdef __KERNEL__
/*
* This is the "All Devices" ID communicated to the BIOS
*/
#define APM_DEVICE_BALL ((apm_info.connection_version > 0x0100) ? \
APM_DEVICE_ALL : APM_DEVICE_OLD_ALL)
#endif
/*
* Battery status
*/
#define APM_MAX_BATTERIES 2
/*
* APM defined capability bit flags
*/
#define APM_CAP_GLOBAL_STANDBY 0x0001
#define APM_CAP_GLOBAL_SUSPEND 0x0002
#define APM_CAP_RESUME_STANDBY_TIMER 0x0004 /* Timer resume from standby */
#define APM_CAP_RESUME_SUSPEND_TIMER 0x0008 /* Timer resume from suspend */
#define APM_CAP_RESUME_STANDBY_RING 0x0010 /* Resume on Ring fr standby */
#define APM_CAP_RESUME_SUSPEND_RING 0x0020 /* Resume on Ring fr suspend */
#define APM_CAP_RESUME_STANDBY_PCMCIA 0x0040 /* Resume on PCMCIA Ring */
#define APM_CAP_RESUME_SUSPEND_PCMCIA 0x0080 /* Resume on PCMCIA Ring */
/*
* ioctl operations
*/
#include <linux/ioctl.h>
#define APM_IOC_STANDBY _IO('A', 1)
#define APM_IOC_SUSPEND _IO('A', 2)
#endif /* LINUX_APM_H */