u-boot/doc/README.sh
Marek Vasut d0487da83f sh: sh3: Remove CPU support
This CPU core is old, no boards using the CPU are left in mainline,
it has no prospects of ever being converted to DM, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>
2019-05-10 22:43:18 +02:00

98 lines
2.6 KiB
Bash

U-Boot for Renesas SuperH
Last update 01/18/2008 by Nobuhiro Iwamatsu
================================================================================
0. What's this?
This file contains status information for the port of U-Boot to the
Renesas SuperH series of CPUs.
================================================================================
1. Overview
SuperH has an original boot loader. However, source code is dirty, and
maintenance is not done.
To improve sharing and the maintenance of the code, Nobuhiro Iwamatsu
started the porting to u-boot in 2007.
================================================================================
2. Supported CPUs
2.1. Renesas SH7750/SH7750R
This CPU has the SH4 core.
2.2. Renesas SH7722
This CPU has the SH4AL-DSP core.
2.3. Renesas SH7780
This CPU has the SH4A core.
================================================================================
3. Supported Boards
3.1. Hitachi UL MS7750SE01/MS7750RSE01
Board specific code is in board/ms7750se
To use this board, type "make ms7750se_config".
Support devices are :
- SCIF
- SDRAM
- NOR Flash
- Marubun PCMCIA
3.2. Hitachi UL MS7722SE01
Board specific code is in board/ms7722se
To use this board, type "make ms7722se_config".
Support devices are :
- SCIF
- SDRAM
- NOR Flash
- Marubun PCMCIA
- SMC91x ethernet
3.2. Hitachi UL MS7720ERP01
Board specific code is in board/ms7720se
To use this board, type "make ms7720se_config".
Support devices are :
- SCIF
- SDRAM
- NOR Flash
- Marubun PCMCIA
3.3. Renesas R7780MP
Board specific code is in board/r7780mp
To use this board, type "make r7780mp_config".
Support devices are :
- SCIF
- DDR-SDRAM
- NOR Flash
- Compact Flash
- ASIX ethernet
- SH7780 PCI bridge
- RTL8110 ethernet
** README **
In SuperH, S-record and binary of made u-boot work on the memory.
When u-boot is written in the flash, it is necessary to change the
address by using 'objcopy'.
ex) shX-linux-objcopy -Ibinary -Osrec u-boot.bin u-boot.flash.srec
================================================================================
4. Compiler
You can use the following of u-boot to compile.
- SuperH Linux Open site
http://www.superh-linux.org/
- KPIT GNU tools
http://www.kpitgnutools.com/
================================================================================
5. Future
I plan to support the following CPUs and boards.
5.1. CPUs
- SH7751R(SH4)
5.2. Boards
- Many boards ;-)
================================================================================
Copyright (c) 2007,2008
Nobuhiro Iwamatsu <iwamatsu@nigaur.org>