c05ed00afb
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
256 lines
6.8 KiB
C
256 lines
6.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Meson GXL and GXM USB2 PHY driver
|
|
*
|
|
* Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
|
|
* Copyright (C) 2018 BayLibre, SAS
|
|
* Author: Neil Armstrong <narmstron@baylibre.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <asm/io.h>
|
|
#include <bitfield.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <generic-phy.h>
|
|
#include <regmap.h>
|
|
#include <linux/delay.h>
|
|
#include <power/regulator.h>
|
|
#include <clk.h>
|
|
#include <linux/usb/otg.h>
|
|
|
|
#include <asm/arch/usb-gx.h>
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/compat.h>
|
|
|
|
/* bits [31:27] are read-only */
|
|
#define U2P_R0 0x0
|
|
#define U2P_R0_BYPASS_SEL BIT(0)
|
|
#define U2P_R0_BYPASS_DM_EN BIT(1)
|
|
#define U2P_R0_BYPASS_DP_EN BIT(2)
|
|
#define U2P_R0_TXBITSTUFF_ENH BIT(3)
|
|
#define U2P_R0_TXBITSTUFF_EN BIT(4)
|
|
#define U2P_R0_DM_PULLDOWN BIT(5)
|
|
#define U2P_R0_DP_PULLDOWN BIT(6)
|
|
#define U2P_R0_DP_VBUS_VLD_EXT_SEL BIT(7)
|
|
#define U2P_R0_DP_VBUS_VLD_EXT BIT(8)
|
|
#define U2P_R0_ADP_PRB_EN BIT(9)
|
|
#define U2P_R0_ADP_DISCHARGE BIT(10)
|
|
#define U2P_R0_ADP_CHARGE BIT(11)
|
|
#define U2P_R0_DRV_VBUS BIT(12)
|
|
#define U2P_R0_ID_PULLUP BIT(13)
|
|
#define U2P_R0_LOOPBACK_EN_B BIT(14)
|
|
#define U2P_R0_OTG_DISABLE BIT(15)
|
|
#define U2P_R0_COMMON_ONN BIT(16)
|
|
#define U2P_R0_FSEL_MASK GENMASK(19, 17)
|
|
#define U2P_R0_REF_CLK_SEL_MASK GENMASK(21, 20)
|
|
#define U2P_R0_POWER_ON_RESET BIT(22)
|
|
#define U2P_R0_V_ATE_TEST_EN_B_MASK GENMASK(24, 23)
|
|
#define U2P_R0_ID_SET_ID_DQ BIT(25)
|
|
#define U2P_R0_ATE_RESET BIT(26)
|
|
#define U2P_R0_FSV_MINUS BIT(27)
|
|
#define U2P_R0_FSV_PLUS BIT(28)
|
|
#define U2P_R0_BYPASS_DM_DATA BIT(29)
|
|
#define U2P_R0_BYPASS_DP_DATA BIT(30)
|
|
|
|
#define U2P_R1 0x4
|
|
#define U2P_R1_BURN_IN_TEST BIT(0)
|
|
#define U2P_R1_ACA_ENABLE BIT(1)
|
|
#define U2P_R1_DCD_ENABLE BIT(2)
|
|
#define U2P_R1_VDAT_SRC_EN_B BIT(3)
|
|
#define U2P_R1_VDAT_DET_EN_B BIT(4)
|
|
#define U2P_R1_CHARGES_SEL BIT(5)
|
|
#define U2P_R1_TX_PREEMP_PULSE_TUNE BIT(6)
|
|
#define U2P_R1_TX_PREEMP_AMP_TUNE_MASK GENMASK(8, 7)
|
|
#define U2P_R1_TX_RES_TUNE_MASK GENMASK(10, 9)
|
|
#define U2P_R1_TX_RISE_TUNE_MASK GENMASK(12, 11)
|
|
#define U2P_R1_TX_VREF_TUNE_MASK GENMASK(16, 13)
|
|
#define U2P_R1_TX_FSLS_TUNE_MASK GENMASK(20, 17)
|
|
#define U2P_R1_TX_HSXV_TUNE_MASK GENMASK(22, 21)
|
|
#define U2P_R1_OTG_TUNE_MASK GENMASK(25, 23)
|
|
#define U2P_R1_SQRX_TUNE_MASK GENMASK(28, 26)
|
|
#define U2P_R1_COMP_DIS_TUNE_MASK GENMASK(31, 29)
|
|
|
|
/* bits [31:14] are read-only */
|
|
#define U2P_R2 0x8
|
|
#define U2P_R2_TESTDATA_IN_MASK GENMASK(7, 0)
|
|
#define U2P_R2_TESTADDR_MASK GENMASK(11, 8)
|
|
#define U2P_R2_TESTDATA_OUT_SEL BIT(12)
|
|
#define U2P_R2_TESTCLK BIT(13)
|
|
#define U2P_R2_TESTDATA_OUT_MASK GENMASK(17, 14)
|
|
#define U2P_R2_ACA_PIN_RANGE_C BIT(18)
|
|
#define U2P_R2_ACA_PIN_RANGE_B BIT(19)
|
|
#define U2P_R2_ACA_PIN_RANGE_A BIT(20)
|
|
#define U2P_R2_ACA_PIN_GND BIT(21)
|
|
#define U2P_R2_ACA_PIN_FLOAT BIT(22)
|
|
#define U2P_R2_CHARGE_DETECT BIT(23)
|
|
#define U2P_R2_DEVICE_SESSION_VALID BIT(24)
|
|
#define U2P_R2_ADP_PROBE BIT(25)
|
|
#define U2P_R2_ADP_SENSE BIT(26)
|
|
#define U2P_R2_SESSION_END BIT(27)
|
|
#define U2P_R2_VBUS_VALID BIT(28)
|
|
#define U2P_R2_B_VALID BIT(29)
|
|
#define U2P_R2_A_VALID BIT(30)
|
|
#define U2P_R2_ID_DIG BIT(31)
|
|
|
|
#define U2P_R3 0xc
|
|
|
|
#define RESET_COMPLETE_TIME 500
|
|
|
|
struct phy_meson_gxl_usb2_priv {
|
|
struct regmap *regmap;
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
struct udevice *phy_supply;
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
struct clk clk;
|
|
#endif
|
|
};
|
|
|
|
static void phy_meson_gxl_usb2_reset(struct phy_meson_gxl_usb2_priv *priv)
|
|
{
|
|
uint val;
|
|
|
|
regmap_read(priv->regmap, U2P_R0, &val);
|
|
|
|
/* reset the PHY and wait until settings are stabilized */
|
|
val |= U2P_R0_POWER_ON_RESET;
|
|
regmap_write(priv->regmap, U2P_R0, val);
|
|
udelay(RESET_COMPLETE_TIME);
|
|
|
|
val &= ~U2P_R0_POWER_ON_RESET;
|
|
regmap_write(priv->regmap, U2P_R0, val);
|
|
udelay(RESET_COMPLETE_TIME);
|
|
}
|
|
|
|
void phy_meson_gxl_usb2_set_mode(struct phy *phy, enum usb_dr_mode mode)
|
|
{
|
|
struct udevice *dev = phy->dev;
|
|
struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
|
|
uint val;
|
|
|
|
regmap_read(priv->regmap, U2P_R0, &val);
|
|
|
|
switch (mode) {
|
|
case USB_DR_MODE_UNKNOWN:
|
|
case USB_DR_MODE_HOST:
|
|
case USB_DR_MODE_OTG:
|
|
val |= U2P_R0_DM_PULLDOWN;
|
|
val |= U2P_R0_DP_PULLDOWN;
|
|
val &= ~U2P_R0_ID_PULLUP;
|
|
break;
|
|
|
|
case USB_DR_MODE_PERIPHERAL:
|
|
val &= ~U2P_R0_DM_PULLDOWN;
|
|
val &= ~U2P_R0_DP_PULLDOWN;
|
|
val |= U2P_R0_ID_PULLUP;
|
|
break;
|
|
}
|
|
|
|
regmap_write(priv->regmap, U2P_R0, val);
|
|
|
|
phy_meson_gxl_usb2_reset(priv);
|
|
}
|
|
|
|
static int phy_meson_gxl_usb2_power_on(struct phy *phy)
|
|
{
|
|
struct udevice *dev = phy->dev;
|
|
struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
|
|
uint val;
|
|
|
|
regmap_read(priv->regmap, U2P_R0, &val);
|
|
/* power on the PHY by taking it out of reset mode */
|
|
val &= ~U2P_R0_POWER_ON_RESET;
|
|
regmap_write(priv->regmap, U2P_R0, val);
|
|
|
|
phy_meson_gxl_usb2_set_mode(phy, USB_DR_MODE_HOST);
|
|
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
if (priv->phy_supply) {
|
|
int ret = regulator_set_enable(priv->phy_supply, true);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_meson_gxl_usb2_power_off(struct phy *phy)
|
|
{
|
|
struct udevice *dev = phy->dev;
|
|
struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
|
|
uint val;
|
|
|
|
regmap_read(priv->regmap, U2P_R0, &val);
|
|
/* power off the PHY by putting it into reset mode */
|
|
val |= U2P_R0_POWER_ON_RESET;
|
|
regmap_write(priv->regmap, U2P_R0, val);
|
|
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
if (priv->phy_supply) {
|
|
int ret = regulator_set_enable(priv->phy_supply, false);
|
|
if (ret) {
|
|
pr_err("Error disabling PHY supply\n");
|
|
return ret;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct phy_ops meson_gxl_usb2_phy_ops = {
|
|
.power_on = phy_meson_gxl_usb2_power_on,
|
|
.power_off = phy_meson_gxl_usb2_power_off,
|
|
};
|
|
|
|
int meson_gxl_usb2_phy_probe(struct udevice *dev)
|
|
{
|
|
struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
|
|
if (ret)
|
|
return ret;
|
|
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
ret = clk_get_by_index(dev, 0, &priv->clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_enable(&priv->clk);
|
|
if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
|
|
pr_err("failed to enable PHY clock\n");
|
|
clk_free(&priv->clk);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
|
|
if (ret && ret != -ENOENT) {
|
|
pr_err("Failed to get PHY regulator\n");
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id meson_gxl_usb2_phy_ids[] = {
|
|
{ .compatible = "amlogic,meson-gxl-usb2-phy" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(meson_gxl_usb2_phy) = {
|
|
.name = "meson_gxl_usb2_phy",
|
|
.id = UCLASS_PHY,
|
|
.of_match = meson_gxl_usb2_phy_ids,
|
|
.probe = meson_gxl_usb2_phy_probe,
|
|
.ops = &meson_gxl_usb2_phy_ops,
|
|
.priv_auto_alloc_size = sizeof(struct phy_meson_gxl_usb2_priv),
|
|
};
|