28ff144662
Descend to drivers/soc directory unconditionally for SPL and U-Boot builds. Individual drivers can have their own config to check what needs to be built for SPL. There should be no increase in SPL code size due to this change. This is required on K3 SoCs to support DMA in SPL. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
123 lines
3.6 KiB
Makefile
123 lines
3.6 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0+
|
|
|
|
obj-$(CONFIG_$(SPL_TPL_)CACHE) += cache/
|
|
obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
|
|
obj-$(CONFIG_$(SPL_TPL_)DM) += core/
|
|
obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/
|
|
obj-$(CONFIG_$(SPL_TPL_)GPIO_SUPPORT) += gpio/
|
|
obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/
|
|
obj-$(CONFIG_$(SPL_TPL_)SYSRESET) += sysreset/
|
|
obj-$(CONFIG_$(SPL_TPL_)FIRMWARE) +=firmware/
|
|
obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
|
|
obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/
|
|
obj-$(CONFIG_$(SPL_TPL_)LED) += led/
|
|
obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
|
|
obj-y += mtd/
|
|
obj-$(CONFIG_$(SPL_TPL_)PCH_SUPPORT) += pch/
|
|
obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
|
|
obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
|
|
obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
|
|
obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
|
|
obj-$(CONFIG_$(SPL_TPL_)RTC_SUPPORT) += rtc/
|
|
obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/
|
|
obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/
|
|
obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
|
|
obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/
|
|
obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
|
|
obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
|
|
obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/
|
|
obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += power/acpi_pmc/
|
|
obj-$(CONFIG_$(SPL_)BOARD) += board/
|
|
|
|
ifndef CONFIG_TPL_BUILD
|
|
ifdef CONFIG_SPL_BUILD
|
|
|
|
obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/
|
|
obj-$(CONFIG_SPL_CACHE_SUPPORT) += cache/
|
|
obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
|
|
obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
|
|
obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
|
|
obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
|
|
obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
|
|
obj-$(CONFIG_$(SPL_)ALTERA_SDRAM) += ddr/altera/
|
|
obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/
|
|
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
|
|
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
|
|
obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/
|
|
obj-$(CONFIG_SPL_DM_RESET) += reset/
|
|
obj-$(CONFIG_SPL_DMA) += dma/
|
|
obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
|
|
obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
|
|
obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
|
|
obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
|
|
obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/
|
|
obj-$(CONFIG_SPL_USB_GADGET) += usb/common/
|
|
obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/
|
|
obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
|
|
obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
|
|
obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
|
|
obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
|
|
obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
|
|
obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
|
|
obj-$(CONFIG_SPL_THERMAL) += thermal/
|
|
|
|
endif
|
|
endif
|
|
|
|
ifdef CONFIG_TPL_BUILD
|
|
|
|
obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
|
|
|
|
endif
|
|
|
|
ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
|
|
|
|
obj-y += adc/
|
|
obj-y += ata/
|
|
obj-$(CONFIG_DM_DEMO) += demo/
|
|
obj-$(CONFIG_BIOSEMU) += bios_emulator/
|
|
obj-y += block/
|
|
obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
|
|
obj-y += cache/
|
|
obj-$(CONFIG_CPU) += cpu/
|
|
obj-y += crypto/
|
|
obj-$(CONFIG_FASTBOOT) += fastboot/
|
|
obj-$(CONFIG_FPGA) += fpga/
|
|
obj-y += misc/
|
|
obj-$(CONFIG_MMC) += mmc/
|
|
obj-$(CONFIG_NVME) += nvme/
|
|
obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/
|
|
obj-y += dfu/
|
|
obj-$(CONFIG_PCH) += pch/
|
|
obj-y += phy/allwinner/
|
|
obj-y += phy/marvell/
|
|
obj-y += rtc/
|
|
obj-y += scsi/
|
|
obj-y += sound/
|
|
obj-y += spmi/
|
|
obj-y += video/
|
|
obj-y += watchdog/
|
|
obj-$(CONFIG_QE) += qe/
|
|
obj-$(CONFIG_U_QE) += qe/
|
|
obj-y += mailbox/
|
|
obj-y += memory/
|
|
obj-y += mtd/
|
|
obj-y += pwm/
|
|
obj-y += reset/
|
|
obj-y += input/
|
|
# SOC specific infrastructure drivers.
|
|
obj-y += smem/
|
|
obj-y += thermal/
|
|
obj-$(CONFIG_TEE) += tee/
|
|
obj-y += axi/
|
|
obj-y += ufs/
|
|
obj-$(CONFIG_W1) += w1/
|
|
obj-$(CONFIG_W1_EEPROM) += w1-eeprom/
|
|
|
|
obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
|
|
obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/
|
|
obj-$(CONFIG_DM_RNG) += rng/
|
|
endif
|
|
|
|
obj-y += soc/
|