u-boot/drivers/sound/max98357a.c
Simon Glass d1998a9fde dm: treewide: Rename ofdata_to_platdata() to of_to_plat()
This name is far too long. Rename it to remove the 'data' bits. This makes
it consistent with the platdata->plat rename.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00

162 lines
3.9 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* max98357a.c -- MAX98357A Audio driver
*
* Copyright 2019 Google LLC
* Parts taken from coreboot
*/
#include <common.h>
#include <audio_codec.h>
#include <dm.h>
#include <log.h>
#include <sound.h>
#include <acpi/acpigen.h>
#include <acpi/acpi_device.h>
#include <acpi/acpi_dp.h>
#include <asm-generic/gpio.h>
#ifdef CONFIG_X86
#include <asm/acpi_nhlt.h>
#endif
#include <dt-bindings/sound/nhlt.h>
#include <dm/acpi.h>
struct max98357a_priv {
struct gpio_desc sdmode_gpio;
};
static int max98357a_of_to_plat(struct udevice *dev)
{
struct max98357a_priv *priv = dev_get_priv(dev);
int ret;
ret = gpio_request_by_name(dev, "sdmode-gpios", 0, &priv->sdmode_gpio,
GPIOD_IS_IN);
if (ret)
return log_msg_ret("gpio", ret);
return 0;
}
static int max98357a_acpi_fill_ssdt(const struct udevice *dev,
struct acpi_ctx *ctx)
{
struct max98357a_priv *priv = dev_get_priv(dev);
char scope[ACPI_PATH_MAX];
char name[ACPI_NAME_MAX];
char path[ACPI_PATH_MAX];
struct acpi_dp *dp;
int ret;
ret = acpi_device_scope(dev, scope, sizeof(scope));
if (ret)
return log_msg_ret("scope", ret);
ret = acpi_get_name(dev, name);
if (ret)
return log_msg_ret("name", ret);
/* Device */
acpigen_write_scope(ctx, scope);
acpigen_write_device(ctx, name);
acpigen_write_name_string(ctx, "_HID",
dev_read_string(dev, "acpi,hid"));
acpigen_write_name_integer(ctx, "_UID", 0);
acpigen_write_name_string(ctx, "_DDN",
dev_read_string(dev, "acpi,ddn"));
acpigen_write_sta(ctx, acpi_device_status(dev));
/* Resources */
acpigen_write_name(ctx, "_CRS");
acpigen_write_resourcetemplate_header(ctx);
ret = acpi_device_write_gpio_desc(ctx, &priv->sdmode_gpio);
if (ret < 0)
return log_msg_ret("gpio", ret);
acpigen_write_resourcetemplate_footer(ctx);
/* _DSD for devicetree properties */
/* This points to the first pin in the first gpio entry in _CRS */
ret = acpi_device_path(dev, path, sizeof(path));
if (ret)
return log_msg_ret("path", ret);
dp = acpi_dp_new_table("_DSD");
acpi_dp_add_gpio(dp, "sdmode-gpio", path, 0, 0,
priv->sdmode_gpio.flags & GPIOD_ACTIVE_LOW ?
ACPI_GPIO_ACTIVE_LOW : ACPI_GPIO_ACTIVE_HIGH);
acpi_dp_add_integer(dp, "sdmode-delay",
dev_read_u32_default(dev, "sdmode-delay", 0));
acpi_dp_write(ctx, dp);
acpigen_pop_len(ctx); /* Device */
acpigen_pop_len(ctx); /* Scope */
return 0;
}
/* For now only X86 boards support NHLT */
#ifdef CONFIG_X86
static const struct nhlt_format_config max98357a_formats[] = {
/* 48 KHz 24-bits per sample. */
{
.num_channels = 2,
.sample_freq_khz = 48,
.container_bits_per_sample = 32,
.valid_bits_per_sample = 24,
.settings_file = "max98357-render-2ch-48khz-24b.dat",
},
};
static const struct nhlt_endp_descriptor max98357a_descriptors[] = {
{
.link = NHLT_LINK_SSP,
.device = NHLT_SSP_DEV_I2S,
.direction = NHLT_DIR_RENDER,
.vid = NHLT_VID,
.did = NHLT_DID_SSP,
.formats = max98357a_formats,
.num_formats = ARRAY_SIZE(max98357a_formats),
},
};
static int max98357a_acpi_setup_nhlt(const struct udevice *dev,
struct acpi_ctx *ctx)
{
u32 hwlink;
int ret;
if (dev_read_u32(dev, "acpi,audio-link", &hwlink))
return log_msg_ret("link", -EINVAL);
/* Virtual bus id of SSP links are the hardware port ids proper. */
ret = nhlt_add_ssp_endpoints(ctx->nhlt, hwlink, max98357a_descriptors,
ARRAY_SIZE(max98357a_descriptors));
if (ret)
return log_msg_ret("add", ret);
return 0;
}
#endif
struct acpi_ops max98357a_acpi_ops = {
.fill_ssdt = max98357a_acpi_fill_ssdt,
#ifdef CONFIG_X86
.setup_nhlt = max98357a_acpi_setup_nhlt,
#endif
};
static const struct audio_codec_ops max98357a_ops = {
};
static const struct udevice_id max98357a_ids[] = {
{ .compatible = "maxim,max98357a" },
{ }
};
U_BOOT_DRIVER(max98357a) = {
.name = "max98357a",
.id = UCLASS_AUDIO_CODEC,
.of_match = max98357a_ids,
.of_to_plat = max98357a_of_to_plat,
.ops = &max98357a_ops,
ACPI_OPS_PTR(&max98357a_acpi_ops)
};