u-boot/drivers/misc/cros_ec.c
Tom Rini 17ead040d4 Audit <flash.h> inclusion
A large number of files include <flash.h> as it used to be how various
SPI flash related functions were found, or for other reasons entirely.
In order to migrate some further CONFIG symbols to Kconfig we need to
not include flash.h in cases where we don't have a NOR flash of some
sort enabled.  Furthermore, in cases where we are in common code and it
doesn't make sense to try and further refactor the code itself in to new
files we need to guard this inclusion.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00

1678 lines
41 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Chromium OS cros_ec driver
*
* Copyright (c) 2012 The Chromium OS Authors.
*/
/*
* This is the interface to the Chrome OS EC. It provides keyboard functions,
* power control and battery management. Quite a few other functions are
* provided to enable the EC software to be updated, talk to the EC's I2C bus
* and store a small amount of data in a memory which persists while the EC
* is not reset.
*/
#define LOG_CATEGORY UCLASS_CROS_EC
#include <common.h>
#include <command.h>
#include <dm.h>
#include <i2c.h>
#include <cros_ec.h>
#include <fdtdec.h>
#include <log.h>
#include <malloc.h>
#include <spi.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <asm/io.h>
#include <asm-generic/gpio.h>
#include <dm/device-internal.h>
#include <dm/of_extra.h>
#include <dm/uclass-internal.h>
#ifdef DEBUG_TRACE
#define debug_trace(fmt, b...) debug(fmt, #b)
#else
#define debug_trace(fmt, b...)
#endif
enum {
/* Timeout waiting for a flash erase command to complete */
CROS_EC_CMD_TIMEOUT_MS = 5000,
/* Timeout waiting for a synchronous hash to be recomputed */
CROS_EC_CMD_HASH_TIMEOUT_MS = 2000,
/* Wait 10 ms between attempts to check if EC's hash is ready */
CROS_EC_HASH_CHECK_DELAY_MS = 10,
};
#define INVALID_HCMD 0xFF
/*
* Map UHEPI masks to non UHEPI commands in order to support old EC FW
* which does not support UHEPI command.
*/
static const struct {
u8 set_cmd;
u8 clear_cmd;
u8 get_cmd;
} event_map[] = {
[EC_HOST_EVENT_MAIN] = {
INVALID_HCMD, EC_CMD_HOST_EVENT_CLEAR,
INVALID_HCMD,
},
[EC_HOST_EVENT_B] = {
INVALID_HCMD, EC_CMD_HOST_EVENT_CLEAR_B,
EC_CMD_HOST_EVENT_GET_B,
},
[EC_HOST_EVENT_SCI_MASK] = {
EC_CMD_HOST_EVENT_SET_SCI_MASK, INVALID_HCMD,
EC_CMD_HOST_EVENT_GET_SCI_MASK,
},
[EC_HOST_EVENT_SMI_MASK] = {
EC_CMD_HOST_EVENT_SET_SMI_MASK, INVALID_HCMD,
EC_CMD_HOST_EVENT_GET_SMI_MASK,
},
[EC_HOST_EVENT_ALWAYS_REPORT_MASK] = {
INVALID_HCMD, INVALID_HCMD, INVALID_HCMD,
},
[EC_HOST_EVENT_ACTIVE_WAKE_MASK] = {
EC_CMD_HOST_EVENT_SET_WAKE_MASK, INVALID_HCMD,
EC_CMD_HOST_EVENT_GET_WAKE_MASK,
},
[EC_HOST_EVENT_LAZY_WAKE_MASK_S0IX] = {
EC_CMD_HOST_EVENT_SET_WAKE_MASK, INVALID_HCMD,
EC_CMD_HOST_EVENT_GET_WAKE_MASK,
},
[EC_HOST_EVENT_LAZY_WAKE_MASK_S3] = {
EC_CMD_HOST_EVENT_SET_WAKE_MASK, INVALID_HCMD,
EC_CMD_HOST_EVENT_GET_WAKE_MASK,
},
[EC_HOST_EVENT_LAZY_WAKE_MASK_S5] = {
EC_CMD_HOST_EVENT_SET_WAKE_MASK, INVALID_HCMD,
EC_CMD_HOST_EVENT_GET_WAKE_MASK,
},
};
void cros_ec_dump_data(const char *name, int cmd, const uint8_t *data, int len)
{
#ifdef DEBUG
int i;
printf("%s: ", name);
if (cmd != -1)
printf("cmd=%#x: ", cmd);
for (i = 0; i < len; i++)
printf("%02x ", data[i]);
printf("\n");
#endif
}
/*
* Calculate a simple 8-bit checksum of a data block
*
* @param data Data block to checksum
* @param size Size of data block in bytes
* Return: checksum value (0 to 255)
*/
int cros_ec_calc_checksum(const uint8_t *data, int size)
{
int csum, i;
for (i = csum = 0; i < size; i++)
csum += data[i];
return csum & 0xff;
}
/**
* Create a request packet for protocol version 3.
*
* The packet is stored in the device's internal output buffer.
*
* @param dev CROS-EC device
* @param cmd Command to send (EC_CMD_...)
* @param cmd_version Version of command to send (EC_VER_...)
* @param dout Output data (may be NULL If dout_len=0)
* @param dout_len Size of output data in bytes
* Return: packet size in bytes, or <0 if error.
*/
static int create_proto3_request(struct cros_ec_dev *cdev,
int cmd, int cmd_version,
const void *dout, int dout_len)
{
struct ec_host_request *rq = (struct ec_host_request *)cdev->dout;
int out_bytes = dout_len + sizeof(*rq);
/* Fail if output size is too big */
if (out_bytes > (int)sizeof(cdev->dout)) {
debug("%s: Cannot send %d bytes\n", __func__, dout_len);
return -EC_RES_REQUEST_TRUNCATED;
}
/* Fill in request packet */
rq->struct_version = EC_HOST_REQUEST_VERSION;
rq->checksum = 0;
rq->command = cmd;
rq->command_version = cmd_version;
rq->reserved = 0;
rq->data_len = dout_len;
/* Copy data after header */
memcpy(rq + 1, dout, dout_len);
/* Write checksum field so the entire packet sums to 0 */
rq->checksum = (uint8_t)(-cros_ec_calc_checksum(cdev->dout, out_bytes));
cros_ec_dump_data("out", cmd, cdev->dout, out_bytes);
/* Return size of request packet */
return out_bytes;
}
/**
* Prepare the device to receive a protocol version 3 response.
*
* @param dev CROS-EC device
* @param din_len Maximum size of response in bytes
* Return: maximum expected number of bytes in response, or <0 if error.
*/
static int prepare_proto3_response_buffer(struct cros_ec_dev *cdev, int din_len)
{
int in_bytes = din_len + sizeof(struct ec_host_response);
/* Fail if input size is too big */
if (in_bytes > (int)sizeof(cdev->din)) {
debug("%s: Cannot receive %d bytes\n", __func__, din_len);
return -EC_RES_RESPONSE_TOO_BIG;
}
/* Return expected size of response packet */
return in_bytes;
}
/**
* Handle a protocol version 3 response packet.
*
* The packet must already be stored in the device's internal input buffer.
*
* @param dev CROS-EC device
* @param dinp Returns pointer to response data
* @param din_len Maximum size of response in bytes
* Return: number of bytes of response data, or <0 if error. Note that error
* codes can be from errno.h or -ve EC_RES_INVALID_CHECKSUM values (and they
* overlap!)
*/
static int handle_proto3_response(struct cros_ec_dev *dev,
uint8_t **dinp, int din_len)
{
struct ec_host_response *rs = (struct ec_host_response *)dev->din;
int in_bytes;
int csum;
cros_ec_dump_data("in-header", -1, dev->din, sizeof(*rs));
/* Check input data */
if (rs->struct_version != EC_HOST_RESPONSE_VERSION) {
debug("%s: EC response version mismatch\n", __func__);
return -EC_RES_INVALID_RESPONSE;
}
if (rs->reserved) {
debug("%s: EC response reserved != 0\n", __func__);
return -EC_RES_INVALID_RESPONSE;
}
if (rs->data_len > din_len) {
debug("%s: EC returned too much data\n", __func__);
return -EC_RES_RESPONSE_TOO_BIG;
}
cros_ec_dump_data("in-data", -1, dev->din + sizeof(*rs), rs->data_len);
/* Update in_bytes to actual data size */
in_bytes = sizeof(*rs) + rs->data_len;
/* Verify checksum */
csum = cros_ec_calc_checksum(dev->din, in_bytes);
if (csum) {
debug("%s: EC response checksum invalid: 0x%02x\n", __func__,
csum);
return -EC_RES_INVALID_CHECKSUM;
}
/* Return error result, if any */
if (rs->result)
return -(int)rs->result;
/* If we're still here, set response data pointer and return length */
*dinp = (uint8_t *)(rs + 1);
return rs->data_len;
}
static int send_command_proto3(struct cros_ec_dev *cdev,
int cmd, int cmd_version,
const void *dout, int dout_len,
uint8_t **dinp, int din_len)
{
struct dm_cros_ec_ops *ops;
int out_bytes, in_bytes;
int rv;
/* Create request packet */
out_bytes = create_proto3_request(cdev, cmd, cmd_version,
dout, dout_len);
if (out_bytes < 0)
return out_bytes;
/* Prepare response buffer */
in_bytes = prepare_proto3_response_buffer(cdev, din_len);
if (in_bytes < 0)
return in_bytes;
ops = dm_cros_ec_get_ops(cdev->dev);
rv = ops->packet ? ops->packet(cdev->dev, out_bytes, in_bytes) :
-ENOSYS;
if (rv < 0)
return rv;
/* Process the response */
return handle_proto3_response(cdev, dinp, din_len);
}
static int send_command(struct cros_ec_dev *dev, uint cmd, int cmd_version,
const void *dout, int dout_len,
uint8_t **dinp, int din_len)
{
struct dm_cros_ec_ops *ops;
int ret = -1;
/* Handle protocol version 3 support */
if (dev->protocol_version == 3) {
return send_command_proto3(dev, cmd, cmd_version,
dout, dout_len, dinp, din_len);
}
ops = dm_cros_ec_get_ops(dev->dev);
ret = ops->command(dev->dev, cmd, cmd_version,
(const uint8_t *)dout, dout_len, dinp, din_len);
return ret;
}
/**
* Send a command to the CROS-EC device and return the reply.
*
* The device's internal input/output buffers are used.
*
* @param dev CROS-EC device
* @param cmd Command to send (EC_CMD_...)
* @param cmd_version Version of command to send (EC_VER_...)
* @param dout Output data (may be NULL If dout_len=0)
* @param dout_len Size of output data in bytes
* @param dinp Response data (may be NULL If din_len=0).
* If not NULL, it will be updated to point to the data
* and will always be double word aligned (64-bits)
* @param din_len Maximum size of response in bytes
* Return: number of bytes in response, or -ve on error
*/
static int ec_command_inptr(struct udevice *dev, uint cmd,
int cmd_version, const void *dout, int dout_len,
uint8_t **dinp, int din_len)
{
struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
uint8_t *din = NULL;
int len;
len = send_command(cdev, cmd, cmd_version, dout, dout_len, &din,
din_len);
/* If the command doesn't complete, wait a while */
if (len == -EC_RES_IN_PROGRESS) {
struct ec_response_get_comms_status *resp = NULL;
ulong start;
/* Wait for command to complete */
start = get_timer(0);
do {
int ret;
mdelay(50); /* Insert some reasonable delay */
ret = send_command(cdev, EC_CMD_GET_COMMS_STATUS, 0,
NULL, 0,
(uint8_t **)&resp, sizeof(*resp));
if (ret < 0)
return ret;
if (get_timer(start) > CROS_EC_CMD_TIMEOUT_MS) {
debug("%s: Command %#02x timeout\n",
__func__, cmd);
return -EC_RES_TIMEOUT;
}
} while (resp->flags & EC_COMMS_STATUS_PROCESSING);
/* OK it completed, so read the status response */
/* not sure why it was 0 for the last argument */
len = send_command(cdev, EC_CMD_RESEND_RESPONSE, 0, NULL, 0,
&din, din_len);
}
debug("%s: len=%d, din=%p\n", __func__, len, din);
if (dinp) {
/* If we have any data to return, it must be 64bit-aligned */
assert(len <= 0 || !((uintptr_t)din & 7));
*dinp = din;
}
return len;
}
/**
* Send a command to the CROS-EC device and return the reply.
*
* The device's internal input/output buffers are used.
*
* @param dev CROS-EC device
* @param cmd Command to send (EC_CMD_...)
* @param cmd_version Version of command to send (EC_VER_...)
* @param dout Output data (may be NULL If dout_len=0)
* @param dout_len Size of output data in bytes
* @param din Response data (may be NULL If din_len=0).
* It not NULL, it is a place for ec_command() to copy the
* data to.
* @param din_len Maximum size of response in bytes
* Return: number of bytes in response, or -ve on error
*/
static int ec_command(struct udevice *dev, uint cmd, int cmd_version,
const void *dout, int dout_len,
void *din, int din_len)
{
uint8_t *in_buffer;
int len;
assert((din_len == 0) || din);
len = ec_command_inptr(dev, cmd, cmd_version, dout, dout_len,
&in_buffer, din_len);
if (len > 0) {
/*
* If we were asked to put it somewhere, do so, otherwise just
* disregard the result.
*/
if (din && in_buffer) {
assert(len <= din_len);
if (len > din_len)
return -ENOSPC;
memmove(din, in_buffer, len);
}
}
return len;
}
int cros_ec_scan_keyboard(struct udevice *dev, struct mbkp_keyscan *scan)
{
if (ec_command(dev, EC_CMD_MKBP_STATE, 0, NULL, 0, scan,
sizeof(scan->data)) != sizeof(scan->data))
return -1;
return 0;
}
int cros_ec_get_next_event(struct udevice *dev,
struct ec_response_get_next_event *event)
{
int ret;
ret = ec_command(dev, EC_CMD_GET_NEXT_EVENT, 0, NULL, 0,
event, sizeof(*event));
if (ret < 0)
return ret;
else if (ret != sizeof(*event))
return -EC_RES_INVALID_RESPONSE;
return 0;
}
int cros_ec_read_id(struct udevice *dev, char *id, int maxlen)
{
struct ec_response_get_version *r;
int ret;
ret = ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
(uint8_t **)&r, sizeof(*r));
if (ret != sizeof(*r)) {
log_err("Got rc %d, expected %u\n", ret, (uint)sizeof(*r));
return -1;
}
if (maxlen > (int)sizeof(r->version_string_ro))
maxlen = sizeof(r->version_string_ro);
switch (r->current_image) {
case EC_IMAGE_RO:
memcpy(id, r->version_string_ro, maxlen);
break;
case EC_IMAGE_RW:
memcpy(id, r->version_string_rw, maxlen);
break;
default:
log_err("Invalid EC image %d\n", r->current_image);
return -1;
}
id[maxlen - 1] = '\0';
return 0;
}
int cros_ec_read_version(struct udevice *dev,
struct ec_response_get_version **versionp)
{
if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
(uint8_t **)versionp, sizeof(**versionp))
!= sizeof(**versionp))
return -1;
return 0;
}
int cros_ec_read_build_info(struct udevice *dev, char **strp)
{
if (ec_command_inptr(dev, EC_CMD_GET_BUILD_INFO, 0, NULL, 0,
(uint8_t **)strp, EC_PROTO2_MAX_PARAM_SIZE) < 0)
return -1;
return 0;
}
int cros_ec_read_current_image(struct udevice *dev,
enum ec_current_image *image)
{
struct ec_response_get_version *r;
if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
(uint8_t **)&r, sizeof(*r)) != sizeof(*r))
return -1;
*image = r->current_image;
return 0;
}
static int cros_ec_wait_on_hash_done(struct udevice *dev,
struct ec_params_vboot_hash *p,
struct ec_response_vboot_hash *hash)
{
ulong start;
start = get_timer(0);
while (hash->status == EC_VBOOT_HASH_STATUS_BUSY) {
mdelay(CROS_EC_HASH_CHECK_DELAY_MS);
p->cmd = EC_VBOOT_HASH_GET;
if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, p, sizeof(*p), hash,
sizeof(*hash)) < 0)
return -1;
if (get_timer(start) > CROS_EC_CMD_HASH_TIMEOUT_MS) {
debug("%s: EC_VBOOT_HASH_GET timeout\n", __func__);
return -EC_RES_TIMEOUT;
}
}
return 0;
}
int cros_ec_read_hash(struct udevice *dev, uint hash_offset,
struct ec_response_vboot_hash *hash)
{
struct ec_params_vboot_hash p;
int rv;
p.cmd = EC_VBOOT_HASH_GET;
p.offset = hash_offset;
if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
hash, sizeof(*hash)) < 0)
return -1;
/* If the EC is busy calculating the hash, fidget until it's done. */
rv = cros_ec_wait_on_hash_done(dev, &p, hash);
if (rv)
return rv;
/* If the hash is valid, we're done. Otherwise, we have to kick it off
* again and wait for it to complete. Note that we explicitly assume
* that hashing zero bytes is always wrong, even though that would
* produce a valid hash value. */
if (hash->status == EC_VBOOT_HASH_STATUS_DONE && hash->size)
return 0;
debug("%s: No valid hash (status=%d size=%d). Compute one...\n",
__func__, hash->status, hash->size);
p.cmd = EC_VBOOT_HASH_START;
p.hash_type = EC_VBOOT_HASH_TYPE_SHA256;
p.nonce_size = 0;
p.offset = hash_offset;
if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
hash, sizeof(*hash)) < 0)
return -1;
rv = cros_ec_wait_on_hash_done(dev, &p, hash);
if (rv)
return rv;
if (hash->status != EC_VBOOT_HASH_STATUS_DONE) {
log_err("Hash did not complete, status=%d\n", hash->status);
return -EIO;
}
debug("%s: hash done\n", __func__);
return 0;
}
static int cros_ec_invalidate_hash(struct udevice *dev)
{
struct ec_params_vboot_hash p;
struct ec_response_vboot_hash *hash;
/* We don't have an explict command for the EC to discard its current
* hash value, so we'll just tell it to calculate one that we know is
* wrong (we claim that hashing zero bytes is always invalid).
*/
p.cmd = EC_VBOOT_HASH_RECALC;
p.hash_type = EC_VBOOT_HASH_TYPE_SHA256;
p.nonce_size = 0;
p.offset = 0;
p.size = 0;
debug("%s:\n", __func__);
if (ec_command_inptr(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
(uint8_t **)&hash, sizeof(*hash)) < 0)
return -1;
/* No need to wait for it to finish */
return 0;
}
int cros_ec_hello(struct udevice *dev, uint *handshakep)
{
struct ec_params_hello req;
struct ec_response_hello *resp;
req.in_data = 0x12345678;
if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req),
(uint8_t **)&resp, sizeof(*resp)) < 0)
return -EIO;
if (resp->out_data != req.in_data + 0x01020304) {
printf("Received invalid handshake %x\n", resp->out_data);
if (handshakep)
*handshakep = req.in_data;
return -ENOTSYNC;
}
return 0;
}
int cros_ec_reboot(struct udevice *dev, enum ec_reboot_cmd cmd, uint8_t flags)
{
struct ec_params_reboot_ec p;
p.cmd = cmd;
p.flags = flags;
if (ec_command_inptr(dev, EC_CMD_REBOOT_EC, 0, &p, sizeof(p), NULL, 0)
< 0)
return -1;
if (!(flags & EC_REBOOT_FLAG_ON_AP_SHUTDOWN)) {
ulong start;
/*
* EC reboot will take place immediately so delay to allow it
* to complete. Note that some reboot types (EC_REBOOT_COLD)
* will reboot the AP as well, in which case we won't actually
* get to this point.
*/
mdelay(50);
start = get_timer(0);
while (cros_ec_hello(dev, NULL)) {
if (get_timer(start) > 3000) {
log_err("EC did not return from reboot\n");
return -ETIMEDOUT;
}
mdelay(5);
}
}
return 0;
}
int cros_ec_interrupt_pending(struct udevice *dev)
{
struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
/* no interrupt support : always poll */
if (!dm_gpio_is_valid(&cdev->ec_int))
return -ENOENT;
return dm_gpio_get_value(&cdev->ec_int);
}
int cros_ec_info(struct udevice *dev, struct ec_response_mkbp_info *info)
{
if (ec_command(dev, EC_CMD_MKBP_INFO, 0, NULL, 0, info,
sizeof(*info)) != sizeof(*info))
return -1;
return 0;
}
int cros_ec_get_event_mask(struct udevice *dev, uint type, uint32_t *mask)
{
struct ec_response_host_event_mask rsp;
int ret;
ret = ec_command(dev, type, 0, NULL, 0, &rsp, sizeof(rsp));
if (ret < 0)
return ret;
else if (ret != sizeof(rsp))
return -EINVAL;
*mask = rsp.mask;
return 0;
}
int cros_ec_set_event_mask(struct udevice *dev, uint type, uint32_t mask)
{
struct ec_params_host_event_mask req;
int ret;
req.mask = mask;
ret = ec_command(dev, type, 0, &req, sizeof(req), NULL, 0);
if (ret < 0)
return ret;
return 0;
}
int cros_ec_get_host_events(struct udevice *dev, uint32_t *events_ptr)
{
struct ec_response_host_event_mask *resp;
/*
* Use the B copy of the event flags, because the main copy is already
* used by ACPI/SMI.
*/
if (ec_command_inptr(dev, EC_CMD_HOST_EVENT_GET_B, 0, NULL, 0,
(uint8_t **)&resp, sizeof(*resp)) < (int)sizeof(*resp))
return -1;
if (resp->mask & EC_HOST_EVENT_MASK(EC_HOST_EVENT_INVALID))
return -1;
*events_ptr = resp->mask;
return 0;
}
int cros_ec_clear_host_events(struct udevice *dev, uint32_t events)
{
struct ec_params_host_event_mask params;
params.mask = events;
/*
* Use the B copy of the event flags, so it affects the data returned
* by cros_ec_get_host_events().
*/
if (ec_command_inptr(dev, EC_CMD_HOST_EVENT_CLEAR_B, 0,
&params, sizeof(params), NULL, 0) < 0)
return -1;
return 0;
}
int cros_ec_flash_protect(struct udevice *dev, uint32_t set_mask,
uint32_t set_flags,
struct ec_response_flash_protect *resp)
{
struct ec_params_flash_protect params;
params.mask = set_mask;
params.flags = set_flags;
if (ec_command(dev, EC_CMD_FLASH_PROTECT, EC_VER_FLASH_PROTECT,
&params, sizeof(params),
resp, sizeof(*resp)) != sizeof(*resp))
return -1;
return 0;
}
static int cros_ec_check_version(struct udevice *dev)
{
struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
struct ec_params_hello req;
struct dm_cros_ec_ops *ops;
int ret;
ops = dm_cros_ec_get_ops(dev);
if (ops->check_version) {
ret = ops->check_version(dev);
if (ret)
return ret;
}
/*
* TODO(sjg@chromium.org).
* There is a strange oddity here with the EC. We could just ignore
* the response, i.e. pass the last two parameters as NULL and 0.
* In this case we won't read back very many bytes from the EC.
* On the I2C bus the EC gets upset about this and will try to send
* the bytes anyway. This means that we will have to wait for that
* to complete before continuing with a new EC command.
*
* This problem is probably unique to the I2C bus.
*
* So for now, just read all the data anyway.
*/
/* Try sending a version 3 packet */
cdev->protocol_version = 3;
req.in_data = 0;
ret = cros_ec_hello(dev, NULL);
if (!ret || ret == -ENOTSYNC)
return 0;
/* Try sending a version 2 packet */
cdev->protocol_version = 2;
ret = cros_ec_hello(dev, NULL);
if (!ret || ret == -ENOTSYNC)
return 0;
/*
* Fail if we're still here, since the EC doesn't understand any
* protcol version we speak. Version 1 interface without command
* version is no longer supported, and we don't know about any new
* protocol versions.
*/
cdev->protocol_version = 0;
printf("%s: ERROR: old EC interface not supported\n", __func__);
return -1;
}
int cros_ec_test(struct udevice *dev)
{
uint out_data;
int ret;
ret = cros_ec_hello(dev, &out_data);
if (ret == -ENOTSYNC) {
printf("Received invalid handshake %x\n", out_data);
return ret;
} else if (ret) {
printf("ec_command_inptr() returned error\n");
return ret;
}
return 0;
}
int cros_ec_flash_offset(struct udevice *dev, enum ec_flash_region region,
uint32_t *offset, uint32_t *size)
{
struct ec_params_flash_region_info p;
struct ec_response_flash_region_info *r;
int ret;
p.region = region;
ret = ec_command_inptr(dev, EC_CMD_FLASH_REGION_INFO,
EC_VER_FLASH_REGION_INFO,
&p, sizeof(p), (uint8_t **)&r, sizeof(*r));
if (ret != sizeof(*r))
return -1;
if (offset)
*offset = r->offset;
if (size)
*size = r->size;
return 0;
}
int cros_ec_flash_erase(struct udevice *dev, uint32_t offset, uint32_t size)
{
struct ec_params_flash_erase p;
p.offset = offset;
p.size = size;
return ec_command_inptr(dev, EC_CMD_FLASH_ERASE, 0, &p, sizeof(p),
NULL, 0);
}
/**
* Write a single block to the flash
*
* Write a block of data to the EC flash. The size must not exceed the flash
* write block size which you can obtain from cros_ec_flash_write_burst_size().
*
* The offset starts at 0. You can obtain the region information from
* cros_ec_flash_offset() to find out where to write for a particular region.
*
* Attempting to write to the region where the EC is currently running from
* will result in an error.
*
* @param dev CROS-EC device
* @param data Pointer to data buffer to write
* @param offset Offset within flash to write to.
* @param size Number of bytes to write
* Return: 0 if ok, -1 on error
*/
static int cros_ec_flash_write_block(struct udevice *dev, const uint8_t *data,
uint32_t offset, uint32_t size)
{
struct ec_params_flash_write *p;
int ret;
p = malloc(sizeof(*p) + size);
if (!p)
return -ENOMEM;
p->offset = offset;
p->size = size;
assert(data && p->size <= EC_FLASH_WRITE_VER0_SIZE);
memcpy(p + 1, data, p->size);
ret = ec_command_inptr(dev, EC_CMD_FLASH_WRITE, 0,
p, sizeof(*p) + size, NULL, 0) >= 0 ? 0 : -1;
free(p);
return ret;
}
/**
* Return optimal flash write burst size
*/
static int cros_ec_flash_write_burst_size(struct udevice *dev)
{
return EC_FLASH_WRITE_VER0_SIZE;
}
/**
* Check if a block of data is erased (all 0xff)
*
* This function is useful when dealing with flash, for checking whether a
* data block is erased and thus does not need to be programmed.
*
* @param data Pointer to data to check (must be word-aligned)
* @param size Number of bytes to check (must be word-aligned)
* Return: 0 if erased, non-zero if any word is not erased
*/
static int cros_ec_data_is_erased(const uint32_t *data, int size)
{
assert(!(size & 3));
size /= sizeof(uint32_t);
for (; size > 0; size -= 4, data++)
if (*data != -1U)
return 0;
return 1;
}
/**
* Read back flash parameters
*
* This function reads back parameters of the flash as reported by the EC
*
* @param dev Pointer to device
* @param info Pointer to output flash info struct
*/
int cros_ec_read_flashinfo(struct udevice *dev,
struct ec_response_flash_info *info)
{
int ret;
ret = ec_command(dev, EC_CMD_FLASH_INFO, 0,
NULL, 0, info, sizeof(*info));
if (ret < 0)
return ret;
return ret < sizeof(*info) ? -1 : 0;
}
int cros_ec_flash_write(struct udevice *dev, const uint8_t *data,
uint32_t offset, uint32_t size)
{
struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
uint32_t burst = cros_ec_flash_write_burst_size(dev);
uint32_t end, off;
int ret;
if (!burst)
return -EINVAL;
/*
* TODO: round up to the nearest multiple of write size. Can get away
* without that on link right now because its write size is 4 bytes.
*/
end = offset + size;
for (off = offset; off < end; off += burst, data += burst) {
uint32_t todo;
/* If the data is empty, there is no point in programming it */
todo = min(end - off, burst);
if (cdev->optimise_flash_write &&
cros_ec_data_is_erased((uint32_t *)data, todo))
continue;
ret = cros_ec_flash_write_block(dev, data, off, todo);
if (ret)
return ret;
}
return 0;
}
/**
* Run verification on a slot
*
* @param me CrosEc instance
* @param region Region to run verification on
* Return: 0 if success or not applicable. Non-zero if verification failed.
*/
int cros_ec_efs_verify(struct udevice *dev, enum ec_flash_region region)
{
struct ec_params_efs_verify p;
int rv;
log_info("EFS: EC is verifying updated image...\n");
p.region = region;
rv = ec_command(dev, EC_CMD_EFS_VERIFY, 0, &p, sizeof(p), NULL, 0);
if (rv >= 0) {
log_info("EFS: Verification success\n");
return 0;
}
if (rv == -EC_RES_INVALID_COMMAND) {
log_info("EFS: EC doesn't support EFS_VERIFY command\n");
return 0;
}
log_info("EFS: Verification failed\n");
return rv;
}
/**
* Read a single block from the flash
*
* Read a block of data from the EC flash. The size must not exceed the flash
* write block size which you can obtain from cros_ec_flash_write_burst_size().
*
* The offset starts at 0. You can obtain the region information from
* cros_ec_flash_offset() to find out where to read for a particular region.
*
* @param dev CROS-EC device
* @param data Pointer to data buffer to read into
* @param offset Offset within flash to read from
* @param size Number of bytes to read
* Return: 0 if ok, -1 on error
*/
static int cros_ec_flash_read_block(struct udevice *dev, uint8_t *data,
uint32_t offset, uint32_t size)
{
struct ec_params_flash_read p;
p.offset = offset;
p.size = size;
return ec_command(dev, EC_CMD_FLASH_READ, 0,
&p, sizeof(p), data, size) >= 0 ? 0 : -1;
}
int cros_ec_flash_read(struct udevice *dev, uint8_t *data, uint32_t offset,
uint32_t size)
{
uint32_t burst = cros_ec_flash_write_burst_size(dev);
uint32_t end, off;
int ret;
end = offset + size;
for (off = offset; off < end; off += burst, data += burst) {
ret = cros_ec_flash_read_block(dev, data, off,
min(end - off, burst));
if (ret)
return ret;
}
return 0;
}
int cros_ec_flash_update_rw(struct udevice *dev, const uint8_t *image,
int image_size)
{
uint32_t rw_offset, rw_size;
int ret;
if (cros_ec_flash_offset(dev, EC_FLASH_REGION_ACTIVE, &rw_offset,
&rw_size))
return -1;
if (image_size > (int)rw_size)
return -1;
/* Invalidate the existing hash, just in case the AP reboots
* unexpectedly during the update. If that happened, the EC RW firmware
* would be invalid, but the EC would still have the original hash.
*/
ret = cros_ec_invalidate_hash(dev);
if (ret)
return ret;
/*
* Erase the entire RW section, so that the EC doesn't see any garbage
* past the new image if it's smaller than the current image.
*
* TODO: could optimize this to erase just the current image, since
* presumably everything past that is 0xff's. But would still need to
* round up to the nearest multiple of erase size.
*/
ret = cros_ec_flash_erase(dev, rw_offset, rw_size);
if (ret)
return ret;
/* Write the image */
ret = cros_ec_flash_write(dev, image, rw_offset, image_size);
if (ret)
return ret;
return 0;
}
int cros_ec_get_sku_id(struct udevice *dev)
{
struct ec_sku_id_info *r;
int ret;
ret = ec_command_inptr(dev, EC_CMD_GET_SKU_ID, 0, NULL, 0,
(uint8_t **)&r, sizeof(*r));
if (ret != sizeof(*r))
return -ret;
return r->sku_id;
}
int cros_ec_read_nvdata(struct udevice *dev, uint8_t *block, int size)
{
struct ec_params_vbnvcontext p;
int len;
if (size != EC_VBNV_BLOCK_SIZE && size != EC_VBNV_BLOCK_SIZE_V2)
return -EINVAL;
p.op = EC_VBNV_CONTEXT_OP_READ;
len = ec_command(dev, EC_CMD_VBNV_CONTEXT, EC_VER_VBNV_CONTEXT,
&p, sizeof(uint32_t) + size, block, size);
if (len != size) {
log_err("Expected %d bytes, got %d\n", size, len);
return -EIO;
}
return 0;
}
int cros_ec_write_nvdata(struct udevice *dev, const uint8_t *block, int size)
{
struct ec_params_vbnvcontext p;
int len;
if (size != EC_VBNV_BLOCK_SIZE && size != EC_VBNV_BLOCK_SIZE_V2)
return -EINVAL;
p.op = EC_VBNV_CONTEXT_OP_WRITE;
memcpy(p.block, block, size);
len = ec_command_inptr(dev, EC_CMD_VBNV_CONTEXT, EC_VER_VBNV_CONTEXT,
&p, sizeof(uint32_t) + size, NULL, 0);
if (len < 0)
return -1;
return 0;
}
int cros_ec_battery_cutoff(struct udevice *dev, uint8_t flags)
{
struct ec_params_battery_cutoff p;
int len;
p.flags = flags;
len = ec_command(dev, EC_CMD_BATTERY_CUT_OFF, 1, &p, sizeof(p),
NULL, 0);
if (len < 0)
return -1;
return 0;
}
int cros_ec_set_pwm_duty(struct udevice *dev, uint8_t index, uint16_t duty)
{
struct ec_params_pwm_set_duty p;
int ret;
p.duty = duty;
p.pwm_type = EC_PWM_TYPE_GENERIC;
p.index = index;
ret = ec_command(dev, EC_CMD_PWM_SET_DUTY, 0, &p, sizeof(p),
NULL, 0);
if (ret < 0)
return ret;
return 0;
}
int cros_ec_set_ldo(struct udevice *dev, uint8_t index, uint8_t state)
{
struct ec_params_ldo_set params;
params.index = index;
params.state = state;
if (ec_command_inptr(dev, EC_CMD_LDO_SET, 0, &params, sizeof(params),
NULL, 0))
return -1;
return 0;
}
int cros_ec_get_ldo(struct udevice *dev, uint8_t index, uint8_t *state)
{
struct ec_params_ldo_get params;
struct ec_response_ldo_get *resp;
params.index = index;
if (ec_command_inptr(dev, EC_CMD_LDO_GET, 0, &params, sizeof(params),
(uint8_t **)&resp, sizeof(*resp)) !=
sizeof(*resp))
return -1;
*state = resp->state;
return 0;
}
int cros_ec_register(struct udevice *dev)
{
struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
char id[MSG_BYTES];
cdev->dev = dev;
gpio_request_by_name(dev, "ec-interrupt", 0, &cdev->ec_int,
GPIOD_IS_IN);
cdev->optimise_flash_write = dev_read_bool(dev, "optimise-flash-write");
if (cros_ec_check_version(dev)) {
debug("%s: Could not detect CROS-EC version\n", __func__);
return -CROS_EC_ERR_CHECK_VERSION;
}
if (cros_ec_read_id(dev, id, sizeof(id))) {
debug("%s: Could not read KBC ID\n", __func__);
return -CROS_EC_ERR_READ_ID;
}
/* Remember this device for use by the cros_ec command */
debug("Google Chrome EC v%d CROS-EC driver ready, id '%s'\n",
cdev->protocol_version, id);
return 0;
}
int cros_ec_decode_ec_flash(struct udevice *dev, struct fdt_cros_ec *config)
{
ofnode flash_node, node;
flash_node = dev_read_subnode(dev, "flash");
if (!ofnode_valid(flash_node)) {
debug("Failed to find flash node\n");
return -1;
}
if (ofnode_read_fmap_entry(flash_node, &config->flash)) {
debug("Failed to decode flash node in chrome-ec\n");
return -1;
}
config->flash_erase_value = ofnode_read_s32_default(flash_node,
"erase-value", -1);
ofnode_for_each_subnode(node, flash_node) {
const char *name = ofnode_get_name(node);
enum ec_flash_region region;
if (0 == strcmp(name, "ro")) {
region = EC_FLASH_REGION_RO;
} else if (0 == strcmp(name, "rw")) {
region = EC_FLASH_REGION_ACTIVE;
} else if (0 == strcmp(name, "wp-ro")) {
region = EC_FLASH_REGION_WP_RO;
} else {
debug("Unknown EC flash region name '%s'\n", name);
return -1;
}
if (ofnode_read_fmap_entry(node, &config->region[region])) {
debug("Failed to decode flash region in chrome-ec'\n");
return -1;
}
}
return 0;
}
int cros_ec_i2c_tunnel(struct udevice *dev, int port, struct i2c_msg *in,
int nmsgs)
{
union {
struct ec_params_i2c_passthru p;
uint8_t outbuf[EC_PROTO2_MAX_PARAM_SIZE];
} params;
union {
struct ec_response_i2c_passthru r;
uint8_t inbuf[EC_PROTO2_MAX_PARAM_SIZE];
} response;
struct ec_params_i2c_passthru *p = &params.p;
struct ec_response_i2c_passthru *r = &response.r;
struct ec_params_i2c_passthru_msg *msg;
uint8_t *pdata, *read_ptr = NULL;
int read_len;
int size;
int rv;
int i;
p->port = port;
p->num_msgs = nmsgs;
size = sizeof(*p) + p->num_msgs * sizeof(*msg);
/* Create a message to write the register address and optional data */
pdata = (uint8_t *)p + size;
read_len = 0;
for (i = 0, msg = p->msg; i < nmsgs; i++, msg++, in++) {
bool is_read = in->flags & I2C_M_RD;
msg->addr_flags = in->addr;
msg->len = in->len;
if (is_read) {
msg->addr_flags |= EC_I2C_FLAG_READ;
read_len += in->len;
read_ptr = in->buf;
if (sizeof(*r) + read_len > sizeof(response)) {
puts("Read length too big for buffer\n");
return -1;
}
} else {
if (pdata - (uint8_t *)p + in->len > sizeof(params)) {
puts("Params too large for buffer\n");
return -1;
}
memcpy(pdata, in->buf, in->len);
pdata += in->len;
}
}
rv = ec_command(dev, EC_CMD_I2C_PASSTHRU, 0, p, pdata - (uint8_t *)p,
r, sizeof(*r) + read_len);
if (rv < 0)
return rv;
/* Parse response */
if (r->i2c_status & EC_I2C_STATUS_ERROR) {
printf("Transfer failed with status=0x%x\n", r->i2c_status);
return -1;
}
if (rv < sizeof(*r) + read_len) {
puts("Truncated read response\n");
return -1;
}
/* We only support a single read message for each transfer */
if (read_len)
memcpy(read_ptr, r->data, read_len);
return 0;
}
int cros_ec_get_features(struct udevice *dev, u64 *featuresp)
{
struct ec_response_get_features r;
int rv;
rv = ec_command(dev, EC_CMD_GET_FEATURES, 0, NULL, 0, &r, sizeof(r));
if (rv != sizeof(r))
return -EIO;
*featuresp = r.flags[0] | (u64)r.flags[1] << 32;
return 0;
}
int cros_ec_check_feature(struct udevice *dev, uint feature)
{
struct ec_response_get_features r;
int rv;
rv = ec_command(dev, EC_CMD_GET_FEATURES, 0, NULL, 0, &r, sizeof(r));
if (rv != sizeof(r))
return -EIO;
if (feature >= 8 * sizeof(r.flags))
return -EINVAL;
return r.flags[feature / 32] & EC_FEATURE_MASK_0(feature) ? true :
false;
}
/*
* Query the EC for specified mask indicating enabled events.
* The EC maintains separate event masks for SMI, SCI and WAKE.
*/
static int cros_ec_uhepi_cmd(struct udevice *dev, uint mask, uint action,
uint64_t *value)
{
int ret;
struct ec_params_host_event req;
struct ec_response_host_event rsp;
req.action = action;
req.mask_type = mask;
if (action != EC_HOST_EVENT_GET)
req.value = *value;
else
*value = 0;
ret = ec_command(dev, EC_CMD_HOST_EVENT, 0, &req, sizeof(req), &rsp,
sizeof(rsp));
if (action != EC_HOST_EVENT_GET)
return ret;
if (ret == 0)
*value = rsp.value;
return ret;
}
static int cros_ec_handle_non_uhepi_cmd(struct udevice *dev, uint hcmd,
uint action, uint64_t *value)
{
int ret = -1;
struct ec_params_host_event_mask req;
struct ec_response_host_event_mask rsp;
if (hcmd == INVALID_HCMD)
return ret;
if (action != EC_HOST_EVENT_GET)
req.mask = (uint32_t)*value;
else
*value = 0;
ret = ec_command(dev, hcmd, 0, &req, sizeof(req), &rsp, sizeof(rsp));
if (action != EC_HOST_EVENT_GET)
return ret;
if (ret == 0)
*value = rsp.mask;
return ret;
}
bool cros_ec_is_uhepi_supported(struct udevice *dev)
{
#define UHEPI_SUPPORTED 1
#define UHEPI_NOT_SUPPORTED 2
static int uhepi_support;
if (!uhepi_support) {
uhepi_support = cros_ec_check_feature(dev,
EC_FEATURE_UNIFIED_WAKE_MASKS) > 0 ? UHEPI_SUPPORTED :
UHEPI_NOT_SUPPORTED;
log_debug("Chrome EC: UHEPI %s\n",
uhepi_support == UHEPI_SUPPORTED ? "supported" :
"not supported");
}
return uhepi_support == UHEPI_SUPPORTED;
}
static int cros_ec_get_mask(struct udevice *dev, uint type)
{
u64 value = 0;
if (cros_ec_is_uhepi_supported(dev)) {
cros_ec_uhepi_cmd(dev, type, EC_HOST_EVENT_GET, &value);
} else {
assert(type < ARRAY_SIZE(event_map));
cros_ec_handle_non_uhepi_cmd(dev, event_map[type].get_cmd,
EC_HOST_EVENT_GET, &value);
}
return value;
}
static int cros_ec_clear_mask(struct udevice *dev, uint type, u64 mask)
{
if (cros_ec_is_uhepi_supported(dev))
return cros_ec_uhepi_cmd(dev, type, EC_HOST_EVENT_CLEAR, &mask);
assert(type < ARRAY_SIZE(event_map));
return cros_ec_handle_non_uhepi_cmd(dev, event_map[type].clear_cmd,
EC_HOST_EVENT_CLEAR, &mask);
}
uint64_t cros_ec_get_events_b(struct udevice *dev)
{
return cros_ec_get_mask(dev, EC_HOST_EVENT_B);
}
int cros_ec_clear_events_b(struct udevice *dev, uint64_t mask)
{
log_debug("Chrome EC: clear events_b mask to 0x%016llx\n", mask);
return cros_ec_clear_mask(dev, EC_HOST_EVENT_B, mask);
}
int cros_ec_read_limit_power(struct udevice *dev, int *limit_powerp)
{
struct ec_params_charge_state p;
struct ec_response_charge_state r;
int ret;
p.cmd = CHARGE_STATE_CMD_GET_PARAM;
p.get_param.param = CS_PARAM_LIMIT_POWER;
ret = ec_command(dev, EC_CMD_CHARGE_STATE, 0, &p, sizeof(p),
&r, sizeof(r));
/*
* If our EC doesn't support the LIMIT_POWER parameter, assume that
* LIMIT_POWER is not requested.
*/
if (ret == -EC_RES_INVALID_PARAM || ret == -EC_RES_INVALID_COMMAND) {
log_warning("PARAM_LIMIT_POWER not supported by EC\n");
return -ENOSYS;
}
if (ret != sizeof(r.get_param))
return -EINVAL;
*limit_powerp = r.get_param.value;
return 0;
}
int cros_ec_config_powerbtn(struct udevice *dev, uint32_t flags)
{
struct ec_params_config_power_button params;
int ret;
params.flags = flags;
ret = ec_command(dev, EC_CMD_CONFIG_POWER_BUTTON, 0,
&params, sizeof(params), NULL, 0);
if (ret < 0)
return ret;
return 0;
}
int cros_ec_get_lid_shutdown_mask(struct udevice *dev)
{
u32 mask;
int ret;
ret = cros_ec_get_event_mask(dev, EC_CMD_HOST_EVENT_GET_SMI_MASK,
&mask);
if (ret < 0)
return ret;
return !!(mask & EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED));
}
int cros_ec_set_lid_shutdown_mask(struct udevice *dev, int enable)
{
u32 mask;
int ret;
ret = cros_ec_get_event_mask(dev, EC_CMD_HOST_EVENT_GET_SMI_MASK,
&mask);
if (ret < 0)
return ret;
/* Set lid close event state in the EC SMI event mask */
if (enable)
mask |= EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED);
else
mask &= ~EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED);
ret = cros_ec_set_event_mask(dev, EC_CMD_HOST_EVENT_SET_SMI_MASK, mask);
if (ret < 0)
return ret;
printf("EC: %sabled lid close event\n", enable ? "en" : "dis");
return 0;
}
int cros_ec_vstore_supported(struct udevice *dev)
{
return cros_ec_check_feature(dev, EC_FEATURE_VSTORE);
}
int cros_ec_vstore_info(struct udevice *dev, u32 *lockedp)
{
struct ec_response_vstore_info *resp;
if (ec_command_inptr(dev, EC_CMD_VSTORE_INFO, 0, NULL, 0,
(uint8_t **)&resp, sizeof(*resp)) != sizeof(*resp))
return -EIO;
if (lockedp)
*lockedp = resp->slot_locked;
return resp->slot_count;
}
/*
* cros_ec_vstore_read - Read data from EC vstore slot
*
* @slot: vstore slot to read from
* @data: buffer to store read data, must be EC_VSTORE_SLOT_SIZE bytes
*/
int cros_ec_vstore_read(struct udevice *dev, int slot, uint8_t *data)
{
struct ec_params_vstore_read req;
struct ec_response_vstore_read *resp;
req.slot = slot;
if (ec_command_inptr(dev, EC_CMD_VSTORE_READ, 0, &req, sizeof(req),
(uint8_t **)&resp, sizeof(*resp)) != sizeof(*resp))
return -EIO;
if (!data || req.slot >= EC_VSTORE_SLOT_MAX)
return -EINVAL;
memcpy(data, resp->data, sizeof(resp->data));
return 0;
}
/*
* cros_ec_vstore_write - Save data into EC vstore slot
*
* @slot: vstore slot to write into
* @data: data to write
* @size: size of data in bytes
*
* Maximum size of data is EC_VSTORE_SLOT_SIZE. It is the callers
* responsibility to check the number of implemented slots by
* querying the vstore info.
*/
int cros_ec_vstore_write(struct udevice *dev, int slot, const uint8_t *data,
size_t size)
{
struct ec_params_vstore_write req;
if (slot >= EC_VSTORE_SLOT_MAX || size > EC_VSTORE_SLOT_SIZE)
return -EINVAL;
req.slot = slot;
memcpy(req.data, data, size);
if (ec_command(dev, EC_CMD_VSTORE_WRITE, 0, &req, sizeof(req), NULL, 0))
return -EIO;
return 0;
}
int cros_ec_get_switches(struct udevice *dev)
{
struct dm_cros_ec_ops *ops;
int ret;
ops = dm_cros_ec_get_ops(dev);
if (!ops->get_switches)
return -ENOSYS;
ret = ops->get_switches(dev);
if (ret < 0)
return log_msg_ret("get", ret);
return ret;
}
int cros_ec_read_batt_charge(struct udevice *dev, uint *chargep)
{
struct ec_params_charge_state req;
struct ec_response_charge_state resp;
int ret;
req.cmd = CHARGE_STATE_CMD_GET_STATE;
ret = ec_command(dev, EC_CMD_CHARGE_STATE, 0, &req, sizeof(req),
&resp, sizeof(resp));
if (ret)
return log_msg_ret("read", ret);
*chargep = resp.get_state.batt_state_of_charge;
return 0;
}
UCLASS_DRIVER(cros_ec) = {
.id = UCLASS_CROS_EC,
.name = "cros-ec",
.per_device_auto = sizeof(struct cros_ec_dev),
#if CONFIG_IS_ENABLED(OF_REAL)
.post_bind = dm_scan_fdt_dev,
#endif
.flags = DM_UC_FLAG_ALLOC_PRIV_DMA,
};