0f9258228e
We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear away the ugly logic in include/fdtdec.h: #ifdef CONFIG_OF_CONTROL # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL) # define OF_CONTROL 0 # else # define OF_CONTROL 1 # endif #else # define OF_CONTROL 0 #endif Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for SPL. Also, we no longer have to cancel CONFIG_OF_CONTROL in include/config_uncmd_spl.h and scripts/Makefile.spl. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
393 lines
9.9 KiB
C
393 lines
9.9 KiB
C
/*
|
|
* (C) Copyright 2007-2009 Michal Simek
|
|
* (C) Copyright 2003 Xilinx Inc.
|
|
*
|
|
* Michal SIMEK <monstr@monstr.eu>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <net.h>
|
|
#include <config.h>
|
|
#include <malloc.h>
|
|
#include <asm/io.h>
|
|
#include <fdtdec.h>
|
|
|
|
#undef DEBUG
|
|
|
|
#define ENET_ADDR_LENGTH 6
|
|
|
|
/* EmacLite constants */
|
|
#define XEL_BUFFER_OFFSET 0x0800 /* Next buffer's offset */
|
|
#define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */
|
|
#define XEL_TSR_OFFSET 0x07FC /* Tx status */
|
|
#define XEL_RSR_OFFSET 0x17FC /* Rx status */
|
|
#define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */
|
|
|
|
/* Xmit complete */
|
|
#define XEL_TSR_XMIT_BUSY_MASK 0x00000001UL
|
|
/* Xmit interrupt enable bit */
|
|
#define XEL_TSR_XMIT_IE_MASK 0x00000008UL
|
|
/* Buffer is active, SW bit only */
|
|
#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000UL
|
|
/* Program the MAC address */
|
|
#define XEL_TSR_PROGRAM_MASK 0x00000002UL
|
|
/* define for programming the MAC address into the EMAC Lite */
|
|
#define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
|
|
|
|
/* Transmit packet length upper byte */
|
|
#define XEL_TPLR_LENGTH_MASK_HI 0x0000FF00UL
|
|
/* Transmit packet length lower byte */
|
|
#define XEL_TPLR_LENGTH_MASK_LO 0x000000FFUL
|
|
|
|
/* Recv complete */
|
|
#define XEL_RSR_RECV_DONE_MASK 0x00000001UL
|
|
/* Recv interrupt enable bit */
|
|
#define XEL_RSR_RECV_IE_MASK 0x00000008UL
|
|
|
|
struct xemaclite {
|
|
u32 nexttxbuffertouse; /* Next TX buffer to write to */
|
|
u32 nextrxbuffertouse; /* Next RX buffer to read from */
|
|
u32 txpp; /* TX ping pong buffer */
|
|
u32 rxpp; /* RX ping pong buffer */
|
|
};
|
|
|
|
static u32 etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
|
|
|
|
static void xemaclite_alignedread(u32 *srcptr, void *destptr, u32 bytecount)
|
|
{
|
|
u32 i;
|
|
u32 alignbuffer;
|
|
u32 *to32ptr;
|
|
u32 *from32ptr;
|
|
u8 *to8ptr;
|
|
u8 *from8ptr;
|
|
|
|
from32ptr = (u32 *) srcptr;
|
|
|
|
/* Word aligned buffer, no correction needed. */
|
|
to32ptr = (u32 *) destptr;
|
|
while (bytecount > 3) {
|
|
*to32ptr++ = *from32ptr++;
|
|
bytecount -= 4;
|
|
}
|
|
to8ptr = (u8 *) to32ptr;
|
|
|
|
alignbuffer = *from32ptr++;
|
|
from8ptr = (u8 *) &alignbuffer;
|
|
|
|
for (i = 0; i < bytecount; i++)
|
|
*to8ptr++ = *from8ptr++;
|
|
}
|
|
|
|
static void xemaclite_alignedwrite(void *srcptr, u32 destptr, u32 bytecount)
|
|
{
|
|
u32 i;
|
|
u32 alignbuffer;
|
|
u32 *to32ptr = (u32 *) destptr;
|
|
u32 *from32ptr;
|
|
u8 *to8ptr;
|
|
u8 *from8ptr;
|
|
|
|
from32ptr = (u32 *) srcptr;
|
|
while (bytecount > 3) {
|
|
|
|
*to32ptr++ = *from32ptr++;
|
|
bytecount -= 4;
|
|
}
|
|
|
|
alignbuffer = 0;
|
|
to8ptr = (u8 *) &alignbuffer;
|
|
from8ptr = (u8 *) from32ptr;
|
|
|
|
for (i = 0; i < bytecount; i++)
|
|
*to8ptr++ = *from8ptr++;
|
|
|
|
*to32ptr++ = alignbuffer;
|
|
}
|
|
|
|
static void emaclite_halt(struct eth_device *dev)
|
|
{
|
|
debug("eth_halt\n");
|
|
}
|
|
|
|
static int emaclite_init(struct eth_device *dev, bd_t *bis)
|
|
{
|
|
struct xemaclite *emaclite = dev->priv;
|
|
debug("EmacLite Initialization Started\n");
|
|
|
|
/*
|
|
* TX - TX_PING & TX_PONG initialization
|
|
*/
|
|
/* Restart PING TX */
|
|
out_be32 (dev->iobase + XEL_TSR_OFFSET, 0);
|
|
/* Copy MAC address */
|
|
xemaclite_alignedwrite(dev->enetaddr, dev->iobase, ENET_ADDR_LENGTH);
|
|
/* Set the length */
|
|
out_be32 (dev->iobase + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
|
|
/* Update the MAC address in the EMAC Lite */
|
|
out_be32 (dev->iobase + XEL_TSR_OFFSET, XEL_TSR_PROG_MAC_ADDR);
|
|
/* Wait for EMAC Lite to finish with the MAC address update */
|
|
while ((in_be32 (dev->iobase + XEL_TSR_OFFSET) &
|
|
XEL_TSR_PROG_MAC_ADDR) != 0)
|
|
;
|
|
|
|
if (emaclite->txpp) {
|
|
/* The same operation with PONG TX */
|
|
out_be32 (dev->iobase + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
|
|
xemaclite_alignedwrite(dev->enetaddr, dev->iobase +
|
|
XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
|
|
out_be32 (dev->iobase + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
|
|
out_be32 (dev->iobase + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
|
|
XEL_TSR_PROG_MAC_ADDR);
|
|
while ((in_be32 (dev->iobase + XEL_TSR_OFFSET +
|
|
XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0)
|
|
;
|
|
}
|
|
|
|
/*
|
|
* RX - RX_PING & RX_PONG initialization
|
|
*/
|
|
/* Write out the value to flush the RX buffer */
|
|
out_be32 (dev->iobase + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK);
|
|
|
|
if (emaclite->rxpp)
|
|
out_be32 (dev->iobase + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET,
|
|
XEL_RSR_RECV_IE_MASK);
|
|
|
|
debug("EmacLite Initialization complete\n");
|
|
return 0;
|
|
}
|
|
|
|
static int xemaclite_txbufferavailable(struct eth_device *dev)
|
|
{
|
|
u32 reg;
|
|
u32 txpingbusy;
|
|
u32 txpongbusy;
|
|
struct xemaclite *emaclite = dev->priv;
|
|
|
|
/*
|
|
* Read the other buffer register
|
|
* and determine if the other buffer is available
|
|
*/
|
|
reg = in_be32 (dev->iobase +
|
|
emaclite->nexttxbuffertouse + 0);
|
|
txpingbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
|
|
XEL_TSR_XMIT_BUSY_MASK);
|
|
|
|
reg = in_be32 (dev->iobase +
|
|
(emaclite->nexttxbuffertouse ^ XEL_TSR_OFFSET) + 0);
|
|
txpongbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
|
|
XEL_TSR_XMIT_BUSY_MASK);
|
|
|
|
return !(txpingbusy && txpongbusy);
|
|
}
|
|
|
|
static int emaclite_send(struct eth_device *dev, void *ptr, int len)
|
|
{
|
|
u32 reg;
|
|
u32 baseaddress;
|
|
struct xemaclite *emaclite = dev->priv;
|
|
|
|
u32 maxtry = 1000;
|
|
|
|
if (len > PKTSIZE)
|
|
len = PKTSIZE;
|
|
|
|
while (!xemaclite_txbufferavailable(dev) && maxtry) {
|
|
udelay(10);
|
|
maxtry--;
|
|
}
|
|
|
|
if (!maxtry) {
|
|
printf("Error: Timeout waiting for ethernet TX buffer\n");
|
|
/* Restart PING TX */
|
|
out_be32 (dev->iobase + XEL_TSR_OFFSET, 0);
|
|
if (emaclite->txpp) {
|
|
out_be32 (dev->iobase + XEL_TSR_OFFSET +
|
|
XEL_BUFFER_OFFSET, 0);
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
/* Determine the expected TX buffer address */
|
|
baseaddress = (dev->iobase + emaclite->nexttxbuffertouse);
|
|
|
|
/* Determine if the expected buffer address is empty */
|
|
reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
|
|
if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
|
|
&& ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
|
|
& XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
|
|
|
|
if (emaclite->txpp)
|
|
emaclite->nexttxbuffertouse ^= XEL_BUFFER_OFFSET;
|
|
|
|
debug("Send packet from 0x%x\n", baseaddress);
|
|
/* Write the frame to the buffer */
|
|
xemaclite_alignedwrite(ptr, baseaddress, len);
|
|
out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
|
|
(XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
|
|
reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
|
|
reg |= XEL_TSR_XMIT_BUSY_MASK;
|
|
if ((reg & XEL_TSR_XMIT_IE_MASK) != 0)
|
|
reg |= XEL_TSR_XMIT_ACTIVE_MASK;
|
|
out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
|
|
return 0;
|
|
}
|
|
|
|
if (emaclite->txpp) {
|
|
/* Switch to second buffer */
|
|
baseaddress ^= XEL_BUFFER_OFFSET;
|
|
/* Determine if the expected buffer address is empty */
|
|
reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
|
|
if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
|
|
&& ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
|
|
& XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
|
|
debug("Send packet from 0x%x\n", baseaddress);
|
|
/* Write the frame to the buffer */
|
|
xemaclite_alignedwrite(ptr, baseaddress, len);
|
|
out_be32 (baseaddress + XEL_TPLR_OFFSET, (len &
|
|
(XEL_TPLR_LENGTH_MASK_HI |
|
|
XEL_TPLR_LENGTH_MASK_LO)));
|
|
reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
|
|
reg |= XEL_TSR_XMIT_BUSY_MASK;
|
|
if ((reg & XEL_TSR_XMIT_IE_MASK) != 0)
|
|
reg |= XEL_TSR_XMIT_ACTIVE_MASK;
|
|
out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
puts("Error while sending frame\n");
|
|
return -1;
|
|
}
|
|
|
|
static int emaclite_recv(struct eth_device *dev)
|
|
{
|
|
u32 length;
|
|
u32 reg;
|
|
u32 baseaddress;
|
|
struct xemaclite *emaclite = dev->priv;
|
|
|
|
baseaddress = dev->iobase + emaclite->nextrxbuffertouse;
|
|
reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
|
|
debug("Testing data at address 0x%x\n", baseaddress);
|
|
if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
|
|
if (emaclite->rxpp)
|
|
emaclite->nextrxbuffertouse ^= XEL_BUFFER_OFFSET;
|
|
} else {
|
|
|
|
if (!emaclite->rxpp) {
|
|
debug("No data was available - address 0x%x\n",
|
|
baseaddress);
|
|
return 0;
|
|
} else {
|
|
baseaddress ^= XEL_BUFFER_OFFSET;
|
|
reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
|
|
if ((reg & XEL_RSR_RECV_DONE_MASK) !=
|
|
XEL_RSR_RECV_DONE_MASK) {
|
|
debug("No data was available - address 0x%x\n",
|
|
baseaddress);
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
/* Get the length of the frame that arrived */
|
|
switch(((ntohl(in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC))) &
|
|
0xFFFF0000 ) >> 16) {
|
|
case 0x806:
|
|
length = 42 + 20; /* FIXME size of ARP */
|
|
debug("ARP Packet\n");
|
|
break;
|
|
case 0x800:
|
|
length = 14 + 14 +
|
|
(((ntohl(in_be32 (baseaddress + XEL_RXBUFF_OFFSET +
|
|
0x10))) & 0xFFFF0000) >> 16);
|
|
/* FIXME size of IP packet */
|
|
debug ("IP Packet\n");
|
|
break;
|
|
default:
|
|
debug("Other Packet\n");
|
|
length = PKTSIZE;
|
|
break;
|
|
}
|
|
|
|
xemaclite_alignedread((u32 *) (baseaddress + XEL_RXBUFF_OFFSET),
|
|
etherrxbuff, length);
|
|
|
|
/* Acknowledge the frame */
|
|
reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
|
|
reg &= ~XEL_RSR_RECV_DONE_MASK;
|
|
out_be32 (baseaddress + XEL_RSR_OFFSET, reg);
|
|
|
|
debug("Packet receive from 0x%x, length %dB\n", baseaddress, length);
|
|
net_process_received_packet((uchar *)etherrxbuff, length);
|
|
return length;
|
|
|
|
}
|
|
|
|
int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
|
|
int txpp, int rxpp)
|
|
{
|
|
struct eth_device *dev;
|
|
struct xemaclite *emaclite;
|
|
|
|
dev = calloc(1, sizeof(*dev));
|
|
if (dev == NULL)
|
|
return -1;
|
|
|
|
emaclite = calloc(1, sizeof(struct xemaclite));
|
|
if (emaclite == NULL) {
|
|
free(dev);
|
|
return -1;
|
|
}
|
|
|
|
dev->priv = emaclite;
|
|
|
|
emaclite->txpp = txpp;
|
|
emaclite->rxpp = rxpp;
|
|
|
|
sprintf(dev->name, "Xelite.%lx", base_addr);
|
|
|
|
dev->iobase = base_addr;
|
|
dev->init = emaclite_init;
|
|
dev->halt = emaclite_halt;
|
|
dev->send = emaclite_send;
|
|
dev->recv = emaclite_recv;
|
|
|
|
eth_register(dev);
|
|
|
|
return 1;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
int xilinx_emaclite_of_init(const void *blob)
|
|
{
|
|
int offset = 0;
|
|
u32 ret = 0;
|
|
u32 reg;
|
|
|
|
do {
|
|
offset = fdt_node_offset_by_compatible(blob, offset,
|
|
"xlnx,xps-ethernetlite-1.00.a");
|
|
if (offset != -1) {
|
|
reg = fdtdec_get_addr(blob, offset, "reg");
|
|
if (reg != FDT_ADDR_T_NONE) {
|
|
u32 rxpp = fdtdec_get_int(blob, offset,
|
|
"xlnx,rx-ping-pong", 0);
|
|
u32 txpp = fdtdec_get_int(blob, offset,
|
|
"xlnx,tx-ping-pong", 0);
|
|
ret |= xilinx_emaclite_initialize(NULL, reg,
|
|
txpp, rxpp);
|
|
} else {
|
|
debug("EMACLITE: Can't get base address\n");
|
|
return -1;
|
|
}
|
|
}
|
|
} while (offset != -1);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|