bbbb50f9fd
Since the vast majority of i.MX6 boards are migrating to SPL, this patch converts im6q_logic to SPL and enables the SDP for loading SPL and u-boot.img over USB. The Falcon mode only supports NAND flash as of now due to limited space/RAM, but all i.MX6D/Q SOM's from Logic PD have internal NAND from which to boot. Signed-off-by: Adam Ford <aford173@gmail.com> |
||
---|---|---|
.. | ||
imx6logic.c | ||
Kconfig | ||
MAINTAINERS | ||
Makefile | ||
README |
U-Boot for LogicPD i.MX6 Development Kit ---------------------------------------- This file contains information for the port of U-Boot to the Logic PD Development kit. Logic PD has an i.MX6 System On Module (SOM) and a correspondong development board. SOM has a built-in microSD socket, DDR and NAND flash. The development kit has an SMSC Ethernet PHY, serial debug port and a variety of peripherals. On the intial release, the SOM came with either an i.MX6D or i.MX6Q. For more details about Logic PD i.MX6 Development kit, visit: https://www.logicpd.com/ Building U-Boot for Logic PD Development Kit -------------------------------------------- To build U-Boot for the Dual and Quad variants: make imx6q_logic_defconfig make u-boot.imx ARCH=arm CROSS_COMPILE=arm-linux- Flashing U-Boot into the SD card -------------------------------- See README.imximage for details on booting from SD Flashing U-Boot into NAND ------------------------- Once in Linux with MTD support for the NAND on /dev/mtd0, program U-Boot with the following: with: kobs-ng init -v -x u-boot-dtb.imx Additional Support Documentation can be found at: https://support.logicpd.com/