6f6b7cfa89
This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
123 lines
3.3 KiB
C
123 lines
3.3 KiB
C
/*
|
|
* ti816x_evm.h
|
|
*
|
|
* Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
|
|
* Antoine Tenart, <atenart@adeneo-embedded.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_TI816X_EVM_H
|
|
#define __CONFIG_TI816X_EVM_H
|
|
|
|
#include <configs/ti_armv7_omap.h>
|
|
#include <asm/arch/omap.h>
|
|
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_TI8168EVM
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
DEFAULT_LINUX_BOOT_ENV \
|
|
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"mmc rescan;" \
|
|
"fatload mmc 0 ${loadaddr} uImage;" \
|
|
"bootm ${loadaddr}" \
|
|
|
|
/* Clock Defines */
|
|
#define V_OSCK 24000000 /* Clock output from T2 */
|
|
#define V_SCLK (V_OSCK >> 1)
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
|
|
#define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x80000000
|
|
|
|
/**
|
|
* Platform/Board specific defs
|
|
*/
|
|
#define CONFIG_SYS_CLK_FREQ 27000000
|
|
#define CONFIG_SYS_TIMERBASE 0x4802E000
|
|
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
|
|
|
|
/*
|
|
* NS16550 Configuration
|
|
*/
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
#define CONFIG_SYS_NS16550_CLK (48000000)
|
|
#define CONFIG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */
|
|
|
|
/* allow overwriting serial config and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_SERIAL1
|
|
#define CONFIG_SERIAL2
|
|
#define CONFIG_SERIAL3
|
|
|
|
/*
|
|
* GPMC NAND block. We support 1 device and the physical address to
|
|
* access CS0 at is 0x8000000.
|
|
*/
|
|
#define CONFIG_SYS_NAND_BASE 0x8000000
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
|
|
/* NAND: SPL related configs */
|
|
|
|
/* NAND: device related configs */
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
|
|
CONFIG_SYS_NAND_PAGE_SIZE)
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
|
|
/* NAND: driver related configs */
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
|
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
|
|
10, 11, 12, 13, 14, 15, 16, 17, \
|
|
18, 19, 20, 21, 22, 23, 24, 25, \
|
|
26, 27, 28, 29, 30, 31, 32, 33, \
|
|
34, 35, 36, 37, 38, 39, 40, 41, \
|
|
42, 43, 44, 45, 46, 47, 48, 49, \
|
|
50, 51, 52, 53, 54, 55, 56, 57, }
|
|
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 14
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000
|
|
#define CONFIG_ENV_OFFSET 0x001c0000
|
|
#define CONFIG_ENV_OFFSET_REDUND 0x001e0000
|
|
#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
|
|
|
|
/* SPL */
|
|
/* Defines for SPL */
|
|
#define CONFIG_SPL_TEXT_BASE 0x40400000
|
|
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
|
|
CONFIG_SPL_TEXT_BASE)
|
|
|
|
#define CONFIG_DRIVER_TI_EMAC
|
|
#define CONFIG_MII
|
|
#define CONFIG_BOOTP_DNS2
|
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
|
#define CONFIG_NET_RETRY_COUNT 10
|
|
|
|
/* Since SPL did pll and ddr initialization for us,
|
|
* we don't need to do it twice.
|
|
*/
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#endif
|
|
|
|
/*
|
|
* Disable MMC DM for SPL build and can be re-enabled after adding
|
|
* DM support in SPL
|
|
*/
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#undef CONFIG_DM_MMC
|
|
#undef CONFIG_TIMER
|
|
#endif
|
|
#endif
|