da4105dfcd
This patch add support for the Silica Pengwyn board [1] The board is based on a TI AM3354 CPU [2] All jumpers removed it will boot from the SDcard, the console is on UART1 accessible via the FDTI -> USB. The on board NAND flash is supported and can act as boot medium, depending on jumper settings. USB Host, USB Device and Ethernet are also provided but untested. [1] http://www.silica.com/product/silica-pengwyn-board.html [2] http://www.ti.com/product/am3354 Signed-off-by: Lothar Felten <lothar.felten@gmail.com> [trini: Move CONFIG_BOARD_LATE_INIT into am335x_evm.h, drop unused spi0_pin_mux from Pengwyn support] Signed-off-by: Tom Rini <trini@ti.com>
83 lines
2.5 KiB
C
83 lines
2.5 KiB
C
/*
|
|
* ti_am335x_common.h
|
|
*
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* For more details, please see the technical documents listed at
|
|
* http://www.ti.com/product/am3359#technicaldocuments
|
|
*/
|
|
|
|
#ifndef __CONFIG_TI_AM335X_COMMON_H__
|
|
#define __CONFIG_TI_AM335X_COMMON_H__
|
|
|
|
#define CONFIG_AM33XX
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
#define CONFIG_SYS_CACHELINE_SIZE 64
|
|
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
|
|
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
|
|
#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
|
|
|
|
#include <asm/arch/omap.h>
|
|
|
|
/* NS16550 Configuration */
|
|
#define CONFIG_SYS_NS16550
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
#define CONFIG_SYS_NS16550_CLK 48000000
|
|
|
|
/* Network defines. */
|
|
#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
|
|
#define CONFIG_BOOTP_DNS2
|
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
#define CONFIG_NET_RETRY_COUNT 10
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
|
|
#define CONFIG_MII /* Required in net/eth.c */
|
|
|
|
/*
|
|
* RTC related defines. To use bootcount you must set bootlimit in the
|
|
* environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
|
|
* in the board config.
|
|
*/
|
|
#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
|
|
|
|
/* Enable the HW watchdog, since we can use this with bootcount */
|
|
#define CONFIG_HW_WATCHDOG
|
|
#define CONFIG_OMAP_WATCHDOG
|
|
|
|
/*
|
|
* SPL related defines. The Public RAM memory map the ROM defines the
|
|
* area between 0x402F0400 and 0x4030B800 as a download area and
|
|
* 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also
|
|
* supports X-MODEM loading via UART, and we leverage this and then use
|
|
* Y-MODEM to load u-boot.img, when booted over UART.
|
|
*/
|
|
#define CONFIG_SPL_TEXT_BASE 0x402F0400
|
|
#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE)
|
|
|
|
/* Enable the watchdog inside of SPL */
|
|
#define CONFIG_SPL_WATCHDOG_SUPPORT
|
|
|
|
/*
|
|
* Since SPL did pll and ddr initialization for us,
|
|
* we don't need to do it twice.
|
|
*/
|
|
#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#endif
|
|
|
|
#ifdef CONFIG_NAND
|
|
#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
|
|
#endif
|
|
|
|
/* Now bring in the rest of the common code. */
|
|
#include <configs/ti_armv7_common.h>
|
|
|
|
#endif /* __CONFIG_TI_AM335X_COMMON_H__ */
|