cb5965fb95
Some 80-column cleanups. Convert printf() to puts() where possible. Use #include "spd_sdram.h" as needed. Enhanced reset command usage message a bit. Signed-off-by: Jon Loeliger <jdl@freescale.com>
300 lines
6.6 KiB
C
300 lines
6.6 KiB
C
/*
|
|
* Copyright 2006 Freescale Semiconductor
|
|
* Jeff Brown
|
|
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <watchdog.h>
|
|
#include <command.h>
|
|
#include <asm/cache.h>
|
|
#include <mpc86xx.h>
|
|
|
|
#if defined(CONFIG_OF_FLAT_TREE)
|
|
#include <ft_build.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_MPC8641HPCN
|
|
extern void mpc8641_reset_board(cmd_tbl_t *cmdtp, int flag,
|
|
int argc, char *argv[]);
|
|
#endif
|
|
|
|
|
|
int checkcpu (void)
|
|
{
|
|
sys_info_t sysinfo;
|
|
uint pvr, svr;
|
|
uint ver;
|
|
uint major, minor;
|
|
uint lcrr; /* local bus clock ratio register */
|
|
uint clkdiv; /* clock divider portion of lcrr */
|
|
|
|
puts("Freescale PowerPC\n");
|
|
|
|
pvr = get_pvr();
|
|
ver = PVR_VER(pvr);
|
|
major = PVR_MAJ(pvr);
|
|
minor = PVR_MIN(pvr);
|
|
|
|
puts("CPU:\n");
|
|
puts(" Core: ");
|
|
|
|
switch (ver) {
|
|
case PVR_VER(PVR_86xx):
|
|
puts("E600");
|
|
break;
|
|
default:
|
|
puts("Unknown");
|
|
break;
|
|
}
|
|
printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
|
|
|
|
svr = get_svr();
|
|
ver = SVR_VER(svr);
|
|
major = SVR_MAJ(svr);
|
|
minor = SVR_MIN(svr);
|
|
|
|
puts(" System: ");
|
|
switch (ver) {
|
|
case SVR_8641:
|
|
puts("8641");
|
|
break;
|
|
case SVR_8641D:
|
|
puts("8641D");
|
|
break;
|
|
default:
|
|
puts("Unknown");
|
|
break;
|
|
}
|
|
printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
|
|
|
|
get_sys_info(&sysinfo);
|
|
|
|
puts(" Clocks: ");
|
|
printf("CPU:%4lu MHz, ", sysinfo.freqProcessor / 1000000);
|
|
printf("MPX:%4lu MHz, ", sysinfo.freqSystemBus / 1000000);
|
|
printf("DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000);
|
|
|
|
#if defined(CFG_LBC_LCRR)
|
|
lcrr = CFG_LBC_LCRR;
|
|
#else
|
|
{
|
|
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
|
volatile ccsr_lbc_t *lbc= &immap->im_lbc;
|
|
|
|
lcrr = lbc->lcrr;
|
|
}
|
|
#endif
|
|
clkdiv = lcrr & 0x0f;
|
|
if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
|
|
printf("LBC:%4lu MHz\n",
|
|
sysinfo.freqSystemBus / 1000000 / clkdiv);
|
|
} else {
|
|
printf(" LBC: unknown (lcrr: 0x%08x)\n", lcrr);
|
|
}
|
|
|
|
puts(" L2: ");
|
|
if (get_l2cr() & 0x80000000)
|
|
puts("Enabled\n");
|
|
else
|
|
puts("Disabled\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static inline void
|
|
soft_restart(unsigned long addr)
|
|
{
|
|
#ifndef CONFIG_MPC8641HPCN
|
|
|
|
/* SRR0 has system reset vector, SRR1 has default MSR value */
|
|
/* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
|
|
|
|
__asm__ __volatile__ ("mtspr 26, %0" :: "r" (addr));
|
|
__asm__ __volatile__ ("li 4, (1 << 6)" ::: "r4");
|
|
__asm__ __volatile__ ("mtspr 27, 4");
|
|
__asm__ __volatile__ ("rfi");
|
|
|
|
#else /* CONFIG_MPC8641HPCN */
|
|
|
|
out8(PIXIS_BASE + PIXIS_RST, 0);
|
|
|
|
#endif /* !CONFIG_MPC8641HPCN */
|
|
|
|
while(1); /* not reached */
|
|
}
|
|
|
|
|
|
/*
|
|
* No generic way to do board reset. Simply call soft_reset.
|
|
*/
|
|
void
|
|
do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
#ifndef CONFIG_MPC8641HPCN
|
|
|
|
#ifdef CFG_RESET_ADDRESS
|
|
ulong addr = CFG_RESET_ADDRESS;
|
|
#else
|
|
/*
|
|
* note: when CFG_MONITOR_BASE points to a RAM address,
|
|
* CFG_MONITOR_BASE - sizeof (ulong) is usually a valid
|
|
* address. Better pick an address known to be invalid on your
|
|
* system and assign it to CFG_RESET_ADDRESS.
|
|
*/
|
|
ulong addr = CFG_MONITOR_BASE - sizeof(ulong);
|
|
#endif
|
|
|
|
/* flush and disable I/D cache */
|
|
__asm__ __volatile__ ("mfspr 3, 1008" ::: "r3");
|
|
__asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5");
|
|
__asm__ __volatile__ ("ori 4, 3, 0xc00" ::: "r4");
|
|
__asm__ __volatile__ ("andc 5, 3, 5" ::: "r5");
|
|
__asm__ __volatile__ ("sync");
|
|
__asm__ __volatile__ ("mtspr 1008, 4");
|
|
__asm__ __volatile__ ("isync");
|
|
__asm__ __volatile__ ("sync");
|
|
__asm__ __volatile__ ("mtspr 1008, 5");
|
|
__asm__ __volatile__ ("isync");
|
|
__asm__ __volatile__ ("sync");
|
|
|
|
soft_restart(addr);
|
|
|
|
#else /* CONFIG_MPC8641HPCN */
|
|
|
|
mpc8641_reset_board(cmdtp, flag, argc, argv);
|
|
|
|
#endif /* !CONFIG_MPC8641HPCN */
|
|
|
|
while(1); /* not reached */
|
|
}
|
|
|
|
|
|
/*
|
|
* Get timebase clock frequency
|
|
*/
|
|
unsigned long get_tbclk(void)
|
|
{
|
|
sys_info_t sys_info;
|
|
|
|
get_sys_info(&sys_info);
|
|
return (sys_info.freqSystemBus + 3L) / 4L;
|
|
}
|
|
|
|
|
|
#if defined(CONFIG_WATCHDOG)
|
|
void
|
|
watchdog_reset(void)
|
|
{
|
|
}
|
|
#endif /* CONFIG_WATCHDOG */
|
|
|
|
|
|
#if defined(CONFIG_DDR_ECC)
|
|
void dma_init(void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
|
volatile ccsr_dma_t *dma = &immap->im_dma;
|
|
|
|
dma->satr0 = 0x00040000;
|
|
dma->datr0 = 0x00040000;
|
|
asm("sync; isync");
|
|
}
|
|
|
|
uint dma_check(void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
|
volatile ccsr_dma_t *dma = &immap->im_dma;
|
|
volatile uint status = dma->sr0;
|
|
|
|
/* While the channel is busy, spin */
|
|
while((status & 4) == 4) {
|
|
status = dma->sr0;
|
|
}
|
|
|
|
if (status != 0) {
|
|
printf ("DMA Error: status = %x\n", status);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
int dma_xfer(void *dest, uint count, void *src)
|
|
{
|
|
volatile immap_t *immap = (immap_t *)CFG_IMMR;
|
|
volatile ccsr_dma_t *dma = &immap->im_dma;
|
|
|
|
dma->dar0 = (uint) dest;
|
|
dma->sar0 = (uint) src;
|
|
dma->bcr0 = count;
|
|
dma->mr0 = 0xf000004;
|
|
asm("sync;isync");
|
|
dma->mr0 = 0xf000005;
|
|
asm("sync;isync");
|
|
return dma_check();
|
|
}
|
|
|
|
#endif /* CONFIG_DDR_ECC */
|
|
|
|
|
|
#ifdef CONFIG_OF_FLAT_TREE
|
|
void ft_cpu_setup(void *blob, bd_t *bd)
|
|
{
|
|
u32 *p;
|
|
ulong clock;
|
|
int len;
|
|
|
|
clock = bd->bi_busfreq;
|
|
p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
|
|
if (p != NULL)
|
|
*p = cpu_to_be32(clock);
|
|
|
|
p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len);
|
|
if (p != NULL)
|
|
*p = cpu_to_be32(clock);
|
|
|
|
p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len);
|
|
if (p != NULL)
|
|
*p = cpu_to_be32(clock);
|
|
|
|
#if defined(CONFIG_MPC86XX_TSEC1)
|
|
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/address", &len);
|
|
memcpy(p, bd->bi_enetaddr, 6);
|
|
#endif
|
|
|
|
#if defined(CONFIG_MPC86XX_TSEC2)
|
|
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/address", &len);
|
|
memcpy(p, bd->bi_enet1addr, 6);
|
|
#endif
|
|
|
|
#if defined(CONFIG_MPC86XX_TSEC3)
|
|
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/address", &len);
|
|
memcpy(p, bd->bi_enet2addr, 6);
|
|
#endif
|
|
|
|
#if defined(CONFIG_MPC86XX_TSEC4)
|
|
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/address", &len);
|
|
memcpy(p, bd->bi_enet3addr, 6);
|
|
#endif
|
|
|
|
}
|
|
#endif
|