u-boot

History

Fabio Estevam 70f27e7f2a mx6cuboxi: Remove obsolete comment We currently support various versions of Solidrun mx6 boards, so remove the obsolete comment. Reported-by: Jon Nettleton <jon.nettleton@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>		2016-01-10 10:50:53 +01:00
..
Kconfig	mx6: remove SYS_SOC from board Kconfig	2015-09-13 10:37:29 +02:00
MAINTAINERS	mx6cuboxi: Fix the defconfig name	2015-04-27 13:13:57 +02:00
Makefile	mx6: Add initial SPL support for HummingBoard-i2eX	2015-04-22 14:39:06 +02:00
mx6cuboxi.c	mx6cuboxi: Remove obsolete comment	2016-01-10 10:50:53 +01:00
README	mx6cuboxi: Mention Cubox-i in the README	2015-05-15 19:21:23 +02:00

README

How to use U-boot on Solid-run mx6 Hummingboard and Cubox-i
-----------------------------------------------------------

- Build U-boot for Hummingboard/Cubox-i:

$ make mrproper
$ make mx6cuboxi_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the board, power it up and U-boot messages should
come up.