u-boot/board/phytium/durian/README
liu hao e3aafef4cf arm: add initial support for the Phytium Durian Board
This adds platform code and the device tree for the Phytium Durian Board.
The initial support comprises the UART and the PCIE.

Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
2019-11-07 18:01:13 -05:00

60 lines
1.5 KiB
Plaintext

Here is the step-by-step to boot U-Boot on phytium durian board.
Compile U-Boot
==============
> make durian_defconfig
> make
Get the prebuild binary about BPF
=================================
> cd ../
> git clone https://github.com/phytium-durian/bpf.git
Package the image
=================
> cd bpf
> cp ../u-boot/u-boot.bin ./
> ./dopack
The fip-all.bin is the final image.
Flash the image into the spi nor-flash
======================================
Any spi nor-flash and appropriate tool can be used to flash.
For example, we choose the S25FL256 chip that produced from
SPANSION company and EZP_XPro V1.2.
Reset the board, you can get U-Boot log message from boot console:
Power on...
Start pcie setup!
End pcie setup!
Start ddr setup!
End ddr setup!
Jump to entrypoint: 0x500000
U-Boot 2019.10-00594-g9ccc1b17ea-dirty (Oct 18 2019 - 00:17:09 +0800)
DRAM: 1.9 GiB
In: uart@28001000
Out: uart@28001000
Err: uart@28001000
scanning bus for devices...
Target spinup took 0 ms.
SATA link 1 timeout.
SATA link 2 timeout.
SATA link 3 timeout.
AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
flags: 64bit ncq led only pmp fbss pio slum part sxs
Device 0: (0:0) Vendor: ATA Prod.: ST1000DM010-2EP1 Rev: CC43
Type: Hard Disk
Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512)
SATA link 0 timeout.
SATA link 1 timeout.
SATA link 2 timeout.
SATA link 3 timeout.
AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
flags: 64bit ncq led only pmp fbss pio slum part sxs
Hit any key to stop autoboot: 0
durian#