2403 lines
76 KiB
Plaintext
2403 lines
76 KiB
Plaintext
commit 1bbbbdd20fcec9933697000dcf55ff7972622596
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Jan 16 12:46:35 2007 +0100
|
|
|
|
Update default environment for Solidcard3
|
|
|
|
commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Jan 15 09:46:29 2007 +0100
|
|
|
|
[PATCH] Fix 440SPe rev B detection from previous patch
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit a443d31410c571ee8f970da819a44d698fdd6b1f
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Sun Jan 14 13:35:31 2007 +0100
|
|
|
|
[FIX] correct I2C Writes for the LM81 Sensor.
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit 0bba5452835f19a61204edcda3a58112fd8e2208
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sat Jan 13 11:17:10 2007 +0100
|
|
|
|
Undo commit 3033ebb2: reset command does not take any arguments
|
|
|
|
Haiying Wang's modification to the reset command was broken, undo it.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 95981778cff0038fd9941044d6a3eda810e33258
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Jan 13 08:01:03 2007 +0100
|
|
|
|
[PATCH] Update 440SP(e) cpu revisions
|
|
|
|
Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Jan 13 07:59:56 2007 +0100
|
|
|
|
[PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
|
|
|
|
Now the board revision and the current PCI bus speed are printed after
|
|
the board message.
|
|
|
|
Also the EBC initialising is now done via defines in the board config
|
|
file.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 36adff362c2c0141ff8a810d42a7e478f779130f
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Jan 13 07:59:19 2007 +0100
|
|
|
|
[PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
|
|
|
|
Now the board revision and the current PCI bus speed are printed after
|
|
the board message.
|
|
|
|
Also the EBC initialising is now done via defines in the board config
|
|
file.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Jan 13 07:57:51 2007 +0100
|
|
|
|
[PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
|
|
|
|
Now the board revision and the current PCI bus speed are printed after
|
|
the board message.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit ca43ba18e910206ef8063e4b22d282630bff3fd2
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Thu Jan 11 15:44:44 2007 +0100
|
|
|
|
Added support for the SOLIDCARD III board from Eurodesign
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
|
|
Author: Reinhard Thies <Reinhard.Thies@web.de>
|
|
Date: Wed Jan 10 14:41:14 2007 +0100
|
|
|
|
Adjusted default environment for cam5200 board.
|
|
|
|
commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Wed Jan 10 15:35:52 2007 +0100
|
|
|
|
Update CHANGELOG
|
|
|
|
commit 787fa15860a57833e50bd30555079a9cd4e519b8
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Wed Jan 10 01:28:39 2007 +0100
|
|
|
|
Fix auto_update for MCC200 board.
|
|
|
|
The invocation of do_auto_update() is moved to the end of the
|
|
misc_init_r() function, after the flash mappings have been
|
|
initialized. Please find attached a patch that implements that
|
|
change.
|
|
|
|
Also correct the decoding of the keypad status. With this update, the
|
|
key that will trigger the update is Column 2, Row 2.
|
|
|
|
commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
|
|
Author: Marian Balakowicz <m8@semihalf.com>
|
|
Date: Wed Jan 10 00:26:15 2007 +0100
|
|
|
|
CAM5200 flash driver modifications:
|
|
- use CFI driver (replaces custom flash driver) for main 'cam5200' target
|
|
- add second build target 'cam5200_niosflash' which still uses custom driver
|
|
|
|
commit 67fea022fa957f59653b5238c7496f80a6b70432
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Tue Jan 9 16:02:48 2007 +0100
|
|
|
|
SPC1920: cleanup memory contoller setup
|
|
|
|
commit 8fc2102faa23593c80381437c09f7745a14deb40
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Tue Jan 9 14:57:14 2007 +0100
|
|
|
|
Fix the cpu speed setup to work with all boards.
|
|
|
|
commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Tue Jan 9 14:57:13 2007 +0100
|
|
|
|
SPC1920: add support for the FM18L08 Ramtron FRAM
|
|
|
|
commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Tue Jan 9 14:57:13 2007 +0100
|
|
|
|
SPC1920: update the HPI register addresses to work with the second
|
|
generation of hardware
|
|
|
|
commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
|
|
Author: Markus Klotzbuecher <mk@creamnet.de>
|
|
Date: Tue Jan 9 14:57:13 2007 +0100
|
|
|
|
Miscellanious spc1920 related cleanups
|
|
|
|
commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Tue Jan 9 14:57:12 2007 +0100
|
|
|
|
SPC1920 GO/NOGO led should be set to color red in U-Boot
|
|
|
|
commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
|
|
Author: Markus Klotzbuecher <mk@creamnet.de>
|
|
Date: Tue Jan 9 14:57:12 2007 +0100
|
|
|
|
Add support for the DS3231 RTC
|
|
|
|
commit 8139567b60d678584b05f0718a681f2047c5e14f
|
|
Author: Markus Klotzbuecher <mk@creamnet.de>
|
|
Date: Tue Jan 9 14:57:11 2007 +0100
|
|
|
|
SMC1 uses external CLK4 instead of BRG on spc1920
|
|
|
|
commit d8d9de1a02fbd880b613d607143d1f57342affc7
|
|
Author: Markus Klotzbuecher <mk@creamnet.de>
|
|
Date: Tue Jan 9 14:57:10 2007 +0100
|
|
|
|
Update the SPC1920 CMB PLD driver
|
|
|
|
commit 3f34f869162750e5e999fd140f884f5de952bcfe
|
|
Author: Markus Klotzbuecher <mk@creamnet.de>
|
|
Date: Tue Jan 9 14:57:10 2007 +0100
|
|
|
|
Add / enable I2C support on the spc1920 board
|
|
|
|
commit d28707dbce1e9ac2017ad051da4133bf22b4204f
|
|
Author: Markus Klotzbuecher <mk@creamnet.de>
|
|
Date: Tue Jan 9 14:57:10 2007 +0100
|
|
|
|
Add support for the tms320671x host port interface (HPI)
|
|
|
|
commit f4eb54529bb3664c3a562e488b460fe075f79d67
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sun Jan 7 00:13:11 2007 +0100
|
|
|
|
Prepare for release 1.2.0
|
|
|
|
commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Jan 6 15:58:09 2007 +0100
|
|
|
|
[PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
|
|
|
|
This patch fixes a problem with an incorrect setup for the refresh
|
|
timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit f16c1da9577f06c5fc08651a4065537407de4635
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Jan 6 15:56:13 2007 +0100
|
|
|
|
[PATCH] Update ALPR board files
|
|
|
|
This update brings the ALPR board support to the newest version.
|
|
It also fixes a problem with the NAND driver.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit cd1d937f90250a32988c37b2b4af8364d25de8ed
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jan 5 11:46:05 2007 +0100
|
|
|
|
[PATCH] nand: Fix problem with oobsize calculation
|
|
|
|
Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
|
|
|
|
The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
|
|
returns a 0x15. In the code fragment below bits [1:0] determine the
|
|
page size, it is ANDed via "(extid & 0x3)" then shifted out. The
|
|
next field is also ANDed with 0x3. However this is a one bit field
|
|
as defined in the Hynix and Samsung parts in the 4th ID byte that
|
|
determins the oobsize, not a two bit field. It works on Samsung as
|
|
bits[3:2] are 01. However for the Hynix there is a 11 in these two
|
|
bits, so the oob size gets messed up.
|
|
|
|
I checked the correct linux code and the suggested fix from Brian is
|
|
also available in the linux nand mtd driver.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jan 5 10:40:36 2007 +0100
|
|
|
|
[PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
|
|
|
|
This fix will make the MAL burst disabling patch for the Linux
|
|
EMAC driver obsolete.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 023889838282b6237b401664f22dd22dfba2c066
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jan 5 10:38:05 2007 +0100
|
|
|
|
[PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
|
|
|
|
This code will optimize the DDR2 controller setup on a board specific
|
|
basis.
|
|
|
|
Note: This code doesn't work right now on the NAND booting image for the
|
|
Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit cce4acbb68398634b8d011ed7bb0d12269c84230
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Thu Dec 28 19:08:21 2006 +0100
|
|
|
|
Few V38B changes:
|
|
- fix a typo in V38B config file
|
|
- move watchdog initialisation earlier in the boot process
|
|
- add "wdt=off" to default kernel command line (disables kernel watchdog)
|
|
|
|
commit 92eb729bad876725aeea908d2addba0800620840
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Wed Dec 27 01:26:13 2006 +0100
|
|
|
|
Fix bug in adaption of Stefano Babic's CFI driver patch.
|
|
|
|
commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sun Dec 24 01:42:57 2006 +0100
|
|
|
|
Minor code cleanup.
|
|
|
|
commit d784fdb05900ada3686d5778783e1fb328e9fb66
|
|
Author: Stefano Babic <sbabic@denx.de>
|
|
Date: Tue Dec 12 00:22:42 2006 +0100
|
|
|
|
Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
|
|
|
|
commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Dec 22 14:29:40 2006 +0100
|
|
|
|
[PATCH] Fix sequoia flash autodetection (finally correct)
|
|
|
|
Now 32MByte and 64MByte FLASH is know to work and other
|
|
configurations should work too.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 82e5236a8b719543643fd26d5827938ab2b94818
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Fri Dec 22 10:30:26 2006 +0100
|
|
|
|
Minor code cleanup; update CHANGELOG.
|
|
|
|
commit fa23044564091f05d9695beb7b5b9a931e7f41a4
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Thu Dec 21 17:17:02 2006 +0100
|
|
|
|
Added support for the TQM8272 board from TQ
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Thu Dec 21 16:14:48 2006 +0100
|
|
|
|
[PATCH] Add support for the UC101 board from MAN.
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit c84bad0ef60e7055ab0bd49b93069509cecc382a
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Wed Dec 20 00:29:43 2006 +0100
|
|
|
|
Fix to make the baudrate changes immediate for the MCF52x2 family.
|
|
|
|
commit daa6e418bcc0c717752e8de939c213c790286096
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Wed Dec 20 00:27:32 2006 +0100
|
|
|
|
Preliminary support for the iDMR board (ColdFire).
|
|
|
|
commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
|
|
Author: Andrei Safronov <safronov@pollux.denx.de>
|
|
Date: Fri Dec 8 16:23:08 2006 +0100
|
|
|
|
automatic update mechanism
|
|
|
|
commit dd520bf314c7add4183c5191692180f576f96b60
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Thu Nov 30 18:02:20 2006 +0100
|
|
|
|
Code cleanup.
|
|
|
|
commit 8d9a8610b8256331132227e9e6585c6bd5742787
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Thu Nov 30 01:54:07 2006 +0100
|
|
|
|
Code cleanup. Update CHANGELOG.
|
|
|
|
commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Wed Nov 29 16:23:42 2006 +0100
|
|
|
|
[PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
|
|
|
|
The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
|
|
not the XLB frequency.
|
|
|
|
This patch depends on the previous patches for MPC52xx device tree support
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
|
|
commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Nov 29 15:42:37 2006 +0100
|
|
|
|
[PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
|
|
|
|
This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
|
|
and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
|
|
quite similar and share the same board directory "prodrive/p3mx"
|
|
and the same config file "p3mx.h".
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Nov 29 12:53:15 2006 +0100
|
|
|
|
[PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
|
|
|
|
In the bootvx command the load address was only read from the env
|
|
variable "loadaddr" and not optionally passed as paramter as described
|
|
in the help. This is fixed with this patch. The behaviour is now the
|
|
same as in the bootelf command.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Nov 29 12:03:57 2006 +0100
|
|
|
|
[PATCH] include/ppc440.h minor error affecting interrupts
|
|
|
|
Fixed include/ppc440.c for UIC address Bug
|
|
|
|
Corrects bug affecting the addresses for the universal interrupt
|
|
controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
|
|
|
|
Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
|
|
Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
|
|
Date: Tue Nov 28 16:17:27 2006 -0600
|
|
|
|
Make fsl-i2c not conflict with SOFT I2C
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit 14198bf768fdc958e3c1afd2404e5262208e98d7
|
|
Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
|
|
Date: Tue Nov 28 16:17:18 2006 -0600
|
|
|
|
Fix I2C master address initialization.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Tue Nov 28 23:31:19 2006 -0600
|
|
|
|
Assign maintainers for mpc8349emds and mpc8360emds
|
|
|
|
Dave for mpc8360emds, and me for mpc8349emds.
|
|
|
|
commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Tue Nov 28 23:28:33 2006 -0600
|
|
|
|
Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
|
|
|
|
give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
|
|
since they are passed by reference to ucc_get_cmxucr_reg and assigned.
|
|
|
|
commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Tue Nov 28 12:09:35 2006 -0600
|
|
|
|
mpc83xx: Miscellaneous code style fixes
|
|
|
|
Implement various code style fixes and similar changes.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Nov 28 17:55:49 2006 +0100
|
|
|
|
[PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
|
|
|
|
This patch adds the code and configuration necessary to boot with an
|
|
arch/powerpc Linux kernel.
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@gmail.com>
|
|
Acked-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit e732faec95a83cb468b4850ae807c8301dde8f6a
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Nov 28 16:09:24 2006 +0100
|
|
|
|
[PATCH] PPC4xx: 440SP Rev. C detection added
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Nov 28 11:04:45 2006 +0100
|
|
|
|
[PATCH] nand: Fix patch merge problem
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Mon Nov 27 22:53:53 2006 +0100
|
|
|
|
Update CHANGELOG
|
|
|
|
commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 17:43:25 2006 +0100
|
|
|
|
[PATCH] 4xx_enet.c: Correct the setting of zmiifer register
|
|
|
|
Patch below corrects the setting of the zmiifer register, it was
|
|
overwritting the register rather than ORing the settings.
|
|
|
|
Signed-off-by: Neil Wilson <NWilson@airspan.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit d1a72545296800b7e219f93104ad5836f0003d66
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 17:34:10 2006 +0100
|
|
|
|
[PATCH] Select NAND embedded environment from board configuration
|
|
|
|
The current NAND Bootloader setup forces the environment
|
|
variables to be in line with the bootloader. This change
|
|
enables the configuration to be made in the board include
|
|
file instead so that it can be individually enabled.
|
|
|
|
Signed-off-by: Nick Spence <nick.spence@freescale.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 15784862857c3c2214498defcfed84ff137fb81e
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 17:22:19 2006 +0100
|
|
|
|
[PATCH] nand_wait() timeout fixes
|
|
|
|
Two fixes for the nand_wait() function in
|
|
drivers/nand/nand_base.c:
|
|
|
|
1. Use correct timeouts. The original timeouts in Linux
|
|
source are 400ms and 20ms not 40s and 20s
|
|
|
|
2. Return correct error value in case of timeout. 0 is
|
|
interpreted as OK.
|
|
|
|
Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit da5553b095bf04f4f109ad7e565dae3aba47b230
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 17:04:06 2006 +0100
|
|
|
|
[PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
|
|
|
|
This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
|
|
arguments to bootm. It removes the getenv("disable_of") test that used
|
|
to be used for this purpose.
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
Acked-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit a9398e018593782c5fa7d0741955fc1256b34c1e
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Mon Nov 27 15:32:42 2006 +0100
|
|
|
|
Minor code cleanup. Update CHANGELOG.
|
|
|
|
commit 1729b92cde575476684bffe819d0b7791b57bff2
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 14:52:04 2006 +0100
|
|
|
|
[PATCH] 4xx: Fix problem with board specific reset code (now for real)
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 14:49:51 2006 +0100
|
|
|
|
[PATCH] alpr: remove unused board specific flash driver
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 14:48:41 2006 +0100
|
|
|
|
[PATCH] 4xx: Fix problem with board specific reset code
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit ec0c2ec725aec9524a177a77ce75559e644a931a
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 14:46:06 2006 +0100
|
|
|
|
[PATCH] Remove testing 4xx enet PHY setup
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 14:12:17 2006 +0100
|
|
|
|
[PATCH] Update Prodrive ALPR board support (440GX)
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 78d620ebb5871d252270dedfad60c6568993b780
|
|
Author: Wolfgang Denk <wd@atlas.denx.de>
|
|
Date: Thu Nov 23 22:58:58 2006 +0100
|
|
|
|
Updates for TQM5200 modules:
|
|
- fix off-by-one error in board/tqm5200/cam5200_flash.c error message
|
|
- simplify "udate" definitions
|
|
|
|
commit 2053283304eeddf250d109e6791eb6fa4cad14f7
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Nov 22 13:20:50 2006 +0100
|
|
|
|
[PATCH] PPC4xx start.S: Fix for processor errata
|
|
|
|
Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
|
|
errata 1.12: 440_33 by moving patch up in code.
|
|
|
|
Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 4ef6251403f637841000e0fef9e832aa01339822
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 20 20:39:52 2006 +0100
|
|
|
|
[PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Mon Nov 20 10:28:30 2006 +0100
|
|
|
|
Update CHANGELOG
|
|
|
|
commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 13 13:55:24 2006 +0100
|
|
|
|
[PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
|
|
|
|
* Adds support for AMD command set Top Boot flash geometry reversal
|
|
* Adds support for reading JEDEC Manufacturer ID and Device ID
|
|
* Adds support for displaying command set, manufacturer id and
|
|
device ids (flinfo)
|
|
* Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
|
|
* Removes outdated change history (refer to git log instead)
|
|
|
|
Signed-off-by: Tolunay Orkun <listmember@orkun.us>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit b21b511d4c50408f4853f46f06b601272196223f
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sun Nov 12 21:13:23 2006 +0100
|
|
|
|
Update CHANGELOG
|
|
|
|
commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Sat Nov 11 22:48:22 2006 +0100
|
|
|
|
Disable the watchdog in the default config for the V38B board.
|
|
|
|
commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Sat Nov 11 22:43:00 2006 +0100
|
|
|
|
Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
|
|
group is enabled for USB earlier (in cpu_init_f() instead of
|
|
usb_lowlevel_init()).
|
|
|
|
commit 91650b3e4de688038d4f71279c44858e3e2c6870
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Mon Nov 6 17:06:36 2006 +0100
|
|
|
|
Sequential accesses to non-existent memory must be synchronized,
|
|
at least on G2 cores.
|
|
|
|
This fixes get_ram_size() problems on MPC5200 Rev. B boards.
|
|
|
|
commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Fri Nov 3 19:15:00 2006 -0600
|
|
|
|
mpc83xx: Update 83xx to use fsl_i2c.c
|
|
|
|
Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
|
|
cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
|
|
Added multiple I2C bus support to fsl_i2c.c.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit d239d74b1c937984bc519083a8e7de373a390f06
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Fri Nov 3 12:00:28 2006 -0600
|
|
|
|
mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
|
|
|
|
Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
|
|
tree matches the other 8xxx trees.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit f7fb2e703ec9688541416962724adff70a7322cb
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Thu Nov 2 19:47:11 2006 -0600
|
|
|
|
mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
|
|
|
|
commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Thu Nov 2 18:05:50 2006 -0600
|
|
|
|
mpc83xx: Fix the incorrect dcbz operation
|
|
|
|
The 834x rev1.x silicon has one CPU5 errata.
|
|
|
|
The issue is when the data cache locked with
|
|
HID0[DLOCK], the dcbz instruction looks like no-op inst.
|
|
|
|
The right behavior of the data cache is when the data cache
|
|
Locked with HID0[DLOCK], the dcbz instruction allocates
|
|
new tags in cache.
|
|
|
|
The 834x rev3.0 and later and 8360 have not this bug inside.
|
|
|
|
So, when 834x rev3.0/8360 are working with ECC, the dcbz
|
|
instruction will corrupt the stack in cache, the processor will
|
|
checkstop reset.
|
|
|
|
However, the 834x rev1.x can work with ECC with these code,
|
|
because the sillicon has this cache bug. The dcbz will not
|
|
corrupt the stack in cache.
|
|
Really, it is the fault code running on fault sillicon.
|
|
|
|
This patch fix the incorrect dcbz operation. Instead of
|
|
CPU FP writing to initialise the ECC.
|
|
|
|
CHANGELOG:
|
|
* Fix the incorrect dcbz operation instead of CPU FP
|
|
writing to initialise the ECC memory. Otherwise, it
|
|
will corrupt the stack in cache, The processor will checkstop
|
|
reset.
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
|
|
commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Nov 1 00:10:40 2006 -0600
|
|
|
|
mpc83xx: add OF_FLAT_TREE bits to 83xx boards
|
|
|
|
add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
|
|
STDOUT_PATH configuration bits to mpc8349emds,
|
|
mpc8349itx, and mpc8360emds board code.
|
|
|
|
redo environment to use bootm with the fdtaddr
|
|
for booting ARCH=powerpc kernels by default,
|
|
and provide default fdtaddr values.
|
|
|
|
commit 48041365b3420589ad464ebc7752e0053538b729
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Nov 1 00:07:25 2006 -0600
|
|
|
|
mpc83xx: change ft code to modify local-mac-address property
|
|
|
|
Update 83xx OF code to update local-mac-address properties
|
|
for ethernet instead of the obsolete 'address' property.
|
|
|
|
commit 9ca880a250870a7d55754291b5591d2b5fe89b54
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Tue Oct 31 21:23:16 2006 -0600
|
|
|
|
mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
|
|
|
|
This patch also adds an improved I2C set_speed(), which handles all clock
|
|
frequencies.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit ac4b5622ce050b5ee1e154b98df630d778661632
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Tue Oct 31 19:54:59 2006 -0600
|
|
|
|
mpc83xx: add the README.mpc8360emds
|
|
|
|
add doc/README.mpc8360emds to accompany the new board support
|
|
|
|
commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Fri Nov 3 12:11:15 2006 -0600
|
|
|
|
mpc83xx: add QE ethernet support
|
|
|
|
this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
|
|
|
|
commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Fri Nov 3 19:33:44 2006 -0600
|
|
|
|
mpc83xx: Add MPC8360EMDS basic board support
|
|
|
|
Add support for the Freescale MPC8360EMDS board.
|
|
Includes DDR, DUART, Local Bus, PCI.
|
|
|
|
commit 23892e49352de74f7fac36ff90bb1be143d195e3
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Tue Oct 31 19:30:40 2006 -0600
|
|
|
|
mpc83xx: add the QUICC Engine (QE) immap file
|
|
|
|
common QE immap file. Also required for 8360.
|
|
|
|
commit b701652a4992bdcc62fb1a6038a85beef9e55da4
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Tue Oct 31 19:25:38 2006 -0600
|
|
|
|
mpc83xx: Add 8360 specifics to 83xx immap
|
|
|
|
Mainly add QE device dependencies, with appropriate 8360 protection.
|
|
Lindent also run.
|
|
|
|
commit 988833324a7fda482c8ac3ca23eb539f8232e404
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Tue Oct 31 19:14:41 2006 -0600
|
|
|
|
mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
|
|
|
|
PREREQUISITE PATCHES:
|
|
|
|
* This patch can only be applied after the following patches have been applied:
|
|
|
|
1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
|
|
2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
|
|
|
|
CHANGELOG:
|
|
|
|
* For the 8349E-mITX, fix some size values in pci_init_board(), enable
|
|
the clock for the 2nd USB board (Linux kernel will hang otherwise),
|
|
and fix the CONFIG_BOOTARGS macro.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Tue Oct 31 18:44:42 2006 -0600
|
|
|
|
mpc83xx: Add support for the MPC8349E-mITX
|
|
|
|
PREREQUISITE PATCHES:
|
|
|
|
* This patch can only be applied after the following patches have been applied:
|
|
|
|
1) DNX#2006090742000024 "Add support for multiple I2C buses"
|
|
2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
|
|
3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
|
|
4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
|
|
5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
|
|
|
|
CHANGELOG:
|
|
|
|
* Add support for the Freescale MPC8349E-mITX reference design platform.
|
|
The second TSEC (Vitesse 7385 switch) is not supported at this time.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit 183da6d9b446cc12123455844ad1187e2375626f
|
|
Author: Ben Warren <bwarren@qstreams.com>
|
|
Date: Tue Sep 12 10:15:53 2006 -0400
|
|
|
|
Additional MPC8349 support for multibus i2c
|
|
|
|
Hello,
|
|
|
|
Here is a patch for a file that was accidentally left out of a previous
|
|
attempt.
|
|
|
|
It accompanies the patch with ticket DNX#2006090742000024
|
|
|
|
CHANGELOG:
|
|
Change PCI initialization to use new multi-bus I2C API.
|
|
|
|
regards,
|
|
Ben
|
|
|
|
commit b24f119d672b709d153ff2ac091d4aa63ec6877d
|
|
Author: Ben Warren <bwarren@qstreams.com>
|
|
Date: Thu Sep 7 16:51:04 2006 -0400
|
|
|
|
Multi-bus I2C implementation of MPC834x
|
|
|
|
Hello,
|
|
|
|
Attached is a patch implementing multiple I2C buses on the MPC834x CPU
|
|
family and the MPC8349EMDS board in particular.
|
|
This patch requires Patch 1 (Add support for multiple I2C buses).
|
|
Testing was performed on a 533MHz board.
|
|
|
|
/*** Note: This patch replaces ticket DNX#2006083042000027 ***/
|
|
|
|
Signed-off-by: Ben Warren <bwarren@qstreams.com>
|
|
|
|
CHANGELOG:
|
|
Implemented driver-level code to support two I2C buses on the
|
|
MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
|
|
are 50kHz, 100kHz and 400kHz on each bus.
|
|
|
|
regards,
|
|
Ben
|
|
|
|
commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
|
|
Author: Ben Warren <bwarren@qstreams.com>
|
|
Date: Thu Sep 7 16:50:54 2006 -0400
|
|
|
|
Add support for multiple I2C buses
|
|
|
|
Hello,
|
|
|
|
Attached is a patch providing support for multiple I2C buses at the
|
|
command level. The second part of the patch includes an implementation
|
|
for the MPC834x CPU and MPC8349EMDS board.
|
|
|
|
/*** Note: This patch replaces ticket DNX#2006083042000018 ***/
|
|
|
|
Signed-off-by: Ben Warren <bwarren@qstreams.com>
|
|
|
|
Overview:
|
|
|
|
1. Include new 'i2c' command (based on USB implementation) using
|
|
CONFIG_I2C_CMD_TREE.
|
|
|
|
2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
|
|
the commands to change bus number and speed are only available under the
|
|
new 'i2c' command mentioned in the first bullet.
|
|
|
|
3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
|
|
systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
|
|
of an array of bus-device pairs. Otherwise, it is an array of uchar.
|
|
|
|
CHANGELOG:
|
|
Added new 'i2c' master command for all I2C interaction. This is
|
|
conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
|
|
setting I2C bus speed as well as changing the active bus if the board
|
|
has more than one (conditionally compiled with
|
|
CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
|
|
Updated README.
|
|
|
|
regards,
|
|
Ben
|
|
|
|
commit bed85caf872714ebf53013967a695c9d63acfc68
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Tue Oct 31 18:13:36 2006 -0600
|
|
|
|
mpc83xx: Add support for Errata DDR6 on MPC 834x systems
|
|
|
|
CHANGELOG:
|
|
|
|
* Errata DDR6, which affects all current MPC 834x processors, lists changes
|
|
required to maintain compatibility with various types of DDR memory. This
|
|
patch implements those changes.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit afd6e470f639883002c7c59d562690a5cb0f4865
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Wed Oct 25 18:45:23 2006 -0500
|
|
|
|
mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
|
|
|
|
commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Tue Aug 22 17:07:00 2006 -0500
|
|
|
|
mpc83xx: Add support for variable flash memory sizes on 83xx systems
|
|
|
|
CHANGELOG:
|
|
|
|
* On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
|
|
window registers, instead of using a hard-coded value of 8MB.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
|
|
Author: Tanya Jiang <tanya.jiang@freescale.com>
|
|
Date: Thu Aug 3 18:38:13 2006 +0800
|
|
|
|
mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
|
|
|
|
Unified TQM834x variable names with 83xx and consolidated macro
|
|
in preparation for the 8360 and other upcoming 83xx devices.
|
|
|
|
Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
|
|
|
|
commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Wed Oct 25 14:41:21 2006 -0500
|
|
|
|
mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
|
|
|
|
Incorporated the common unified variable names and the changes in preparation
|
|
for releasing mpc8360 patches.
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
|
|
commit 3894c46c27c64891f93ac04edde86a9fa9758d92
|
|
Author: Tanya Jiang <tanya.jiang@freescale.com>
|
|
Date: Thu Aug 3 18:36:02 2006 +0800
|
|
|
|
mpc83xx: Fix missing build for mpc8349emds pci.c
|
|
|
|
Make pci build for mpc8349emds
|
|
|
|
Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
|
|
|
|
commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
|
|
Author: Tanya Jiang <tanya.jiang@freescale.com>
|
|
Date: Thu Aug 3 18:39:49 2006 +0800
|
|
|
|
mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
|
|
|
|
Removed unused file resetvec.S for mpc83xx cpu
|
|
|
|
Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
|
|
|
|
commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
|
|
Author: Nick Spence <Nick.Spence@freescale.com>
|
|
Date: Sat Sep 30 00:32:59 2006 -0700
|
|
|
|
NAND Flash verify across block boundaries
|
|
|
|
This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
|
|
defined
|
|
and the write crosses a block boundary. The pointer to the verification
|
|
buffer (bufstart) is not being updated to reflect the starting of the
|
|
new
|
|
block so the verification of the second block fails.
|
|
|
|
CHANGELOG:
|
|
|
|
* Fix NAND FLASH page verification across block boundaries
|
|
|
|
commit f484dc791a3932537213c43c654cc1295c64b84c
|
|
Author: Nick Spence <nick.spence@freescale.com>
|
|
Date: Thu Sep 7 07:39:46 2006 -0700
|
|
|
|
Added RGMII support to the TSECs and Marvell 881111 Phy
|
|
|
|
Added a phy initialization to adjust the RGMII RX and TX timing
|
|
Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
|
|
|
|
Signed-off-by: Nick Spence <nick.spence@freescale.com>
|
|
|
|
commit c59200443072353044aa4bf737a5a60f9a9af231
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Thu Nov 2 15:15:01 2006 +0100
|
|
|
|
Release U-Boot 1.1.6
|
|
|
|
commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Wed Nov 1 02:04:38 2006 +0100
|
|
|
|
Finish up support for MarelV38B board
|
|
- add watchdog support
|
|
- enable GPIO_WKUP_7 pin for input
|
|
- code cleanup
|
|
|
|
commit ffa150bc90c943ca265170bd1be3f293674dd5c7
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Wed Nov 1 01:45:46 2006 +0100
|
|
|
|
- Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
|
|
* remove warnings when compiling ethaddr.c
|
|
* adjust linker script (fixes a crash resulting from incorrect
|
|
definition of __u_boot_cmd_start)
|
|
- Some MarelV38B code cleanup.
|
|
|
|
commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Wed Nov 1 01:38:16 2006 +0100
|
|
|
|
- Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
|
|
MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
|
|
Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
|
|
MPC5XXX_WU_GPIO_DATA_O for affected boards.
|
|
|
|
- Add defintions for some MPC5XXX GPIO pins.
|
|
|
|
commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Wed Nov 1 01:34:29 2006 +0100
|
|
|
|
Changed MarelV38B board make target to lowercase. Config file cleanup.
|
|
|
|
commit 1954be6e9c9421b45d0a9d05b10356acc7563150
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sun Oct 29 01:03:51 2006 +0200
|
|
|
|
Automatically adjust ARFLAGS so "make -s" is really silent.
|
|
|
|
commit fae684e89844856383bdf101440889557df3e6b1
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Oct 28 16:45:00 2006 +0200
|
|
|
|
[PATCH] omap925.c: Remove unused functions
|
|
|
|
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Oct 28 17:12:58 2006 +0200
|
|
|
|
[PATCH] Add some missing machtypes for netstar & voiceblue boards
|
|
|
|
Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
|
|
numbers in code.
|
|
|
|
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 856f054410cef52d868feb330168b2a4c4091328
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Oct 28 15:55:52 2006 +0200
|
|
|
|
[PATCH] NAND: Partition name support added to NAND subsystem
|
|
|
|
chpart, nboot and NAND subsystem related commands now accept also partition
|
|
name to specify offset.
|
|
|
|
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sat Oct 28 02:29:44 2006 +0200
|
|
|
|
Update CHANGELOG.
|
|
|
|
commit 2751a95abd1b96911081c357e96a12fa97b40dee
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sat Oct 28 02:29:14 2006 +0200
|
|
|
|
Enable commandline editing and hush shell on all TQM boards.
|
|
|
|
commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sat Oct 28 02:28:02 2006 +0200
|
|
|
|
README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
|
|
|
|
commit 471a7be7a042e95e440f5de969c9765214ae8d6e
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Sat Oct 28 01:14:32 2006 +0200
|
|
|
|
Check for illegal character '=' in environment variable names.
|
|
|
|
Make sure the string passed as variable name does not contain a '='
|
|
character. This not only prevents the common error or typing
|
|
"setenv foo=bar" instead of "setenv foo bar", but (more importantly)
|
|
also closes a backdoor which allowed to delete write-protected
|
|
environment variables, for example by using "setenv ethaddr=".
|
|
|
|
commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sat Oct 28 00:38:39 2006 +0200
|
|
|
|
Minor code cleanup.
|
|
|
|
commit e11887a77d81077416a2d1c5e0354916fee8c034
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Thu Oct 26 17:55:31 2006 +0200
|
|
|
|
Don't pass any debug options directly to the assembler
|
|
|
|
When passing the -g option to gcc, gcc automatically selects a
|
|
suitable --g<format> option to pass on to the assembler.
|
|
Thus, there's no point in forcing a specific debug option on the
|
|
assembler using the -Wa mechanism.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Fri Oct 27 07:47:22 2006 -0500
|
|
|
|
MPC86xx: Cleaned up unused and conditionally used local variables.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Fri Oct 27 11:55:21 2006 +0200
|
|
|
|
Fix "ar" flags in some Makefiles to allow for silent "make -s"
|
|
|
|
commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
|
|
Author: Ben Warren <bwarren@qstreams.com>
|
|
Date: Thu Oct 26 14:38:25 2006 -0400
|
|
|
|
Fix TSEC driver (now for real): avoid crashes if PHY is not attached
|
|
to a TSEC (e.g. a switch is connected via RMII) or
|
|
if the PHY is defective/incorrectly configured.
|
|
|
|
Signed-off-by: Ben Warren <bwarren@qstreams.com>
|
|
|
|
commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
|
|
Author: Ben Warren <bwarren@qstreams.com>
|
|
Date: Thu Oct 26 14:38:25 2006 -0400
|
|
|
|
Fix TSEC driver: avoid crashes if PHY is not attached
|
|
to a TSEC (e.g. a switch is connected via RMII) or
|
|
if the PHY is defective/incorrectly configured.
|
|
|
|
Signed-off-by: Ben Warren <bwarren@qstreams.com>
|
|
|
|
commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Thu Oct 26 16:24:31 2006 +0200
|
|
|
|
Code cleanup.
|
|
|
|
commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Wed Oct 25 15:48:59 2006 +0200
|
|
|
|
Finish up support for the ATSTK1000/ATSTK1002 boards
|
|
|
|
Add atstk1002_config target to Makefile and move the AVR32 section
|
|
down below Blackfin so that it doesn't end up in the middle of
|
|
MIPS.
|
|
|
|
Drop the autogenerated linker script thing for now. Will have to
|
|
revisit how to handle chips with different flash and RAM layout
|
|
later.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
|
|
Author: Kumar Gala <galak@kernel.crashing.org>
|
|
Date: Tue Oct 24 23:47:37 2006 -0500
|
|
|
|
Added support for Multi-Image files that contain a device tree
|
|
|
|
If a Multi-Image file contains a third image we try to use it as a
|
|
device tree. The device tree image is assumed to be uncompressed in the
|
|
image file. We automatically allocate space for the device tree in memory
|
|
and provide an 8k pad to allow more than a reasonable amount of growth.
|
|
|
|
Additionally, a device tree that was contained in flash will now automatically
|
|
get copied to system memory as part of boot. Previously an error was
|
|
reported if one tried to boot a device tree that was in flash.
|
|
|
|
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
|
|
commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Tue Oct 24 21:35:55 2006 +0200
|
|
|
|
Switch to automatically generated CHANGELOG file.
|
|
(use "make CHANGELOG" to update it from time to time)
|
|
|
|
commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Oct 24 18:06:48 2006 +0200
|
|
|
|
Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
|
|
Patch by Stefan Roese, 24 Oct 2006
|
|
|
|
commit 8ae3b713b2286e0c3213b7802062e4c1599010de
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 17:24:55 2006 +0200
|
|
|
|
Merge with /home/wd/git/u-boot/master
|
|
|
|
commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 15:32:57 2006 +0200
|
|
|
|
Code cleanup
|
|
|
|
commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 14:51:36 2006 +0200
|
|
|
|
Move atstk1000 files into vendor specific directory.
|
|
Patch by Haavard Skinnemoen, 12 Sep 2006
|
|
|
|
commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 14:42:37 2006 +0200
|
|
|
|
Add ATSTK1000 and ATSTK1002 board support
|
|
Patch by Haavard Skinnemoen, 06 Sep 2006
|
|
|
|
This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
|
|
daughterboard.
|
|
|
|
ATSTK1000 is a full-featured development board for AT32AP CPUs. It
|
|
has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
|
|
and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
|
|
CompactFlash cards. For more information, please see this page:
|
|
|
|
http://www.atmel.com/dyn/products/tools.asp?family_id=682
|
|
|
|
The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
|
|
AT32AP7000 chip.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit f93ae788c3640fcde5db383471d45548ff4060d0
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 14:31:24 2006 +0200
|
|
|
|
Add common serial driver for Atmel AT32 and AT91 chips
|
|
Patch by Haavard Skinnemoen, 06 Sep 2006
|
|
|
|
This is a first attempt at creating a common serial driver for Atmel
|
|
chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
|
|
be possible to support AT91RM9200 and other ARM-based chips with some
|
|
minor modifications.
|
|
|
|
There's nothing fundamentally AVR32-specific in this driver, but it
|
|
does use some features which are currently only defined for the
|
|
AT32AP CPU port:
|
|
* pm_get_clock_freq: Obtain the clock frequency of a given domain
|
|
* gd->console_uart: A "struct device" containing information about
|
|
register mappings, gpio resources and clocks associated with the
|
|
UART device.
|
|
|
|
For more information about these features, please see the "AT32AP
|
|
CPU" patch.
|
|
|
|
commit 72a087e04705c26cad982879ebd06b5281bf825a
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 14:27:35 2006 +0200
|
|
|
|
Add AT32AP CPU and AT32AP7000 SoC support
|
|
Patch by Haavard Skinnemoen, 06 Sep 2006
|
|
|
|
This patch adds support for the AT32AP CPU family and the AT32AP7000
|
|
chip, which is the first chip implementing the AVR32 architecture.
|
|
|
|
The AT32AP CPU core is a high-performance implementation featuring a
|
|
7-stage pipeline, separate instruction- and data caches, and a MMU.
|
|
For more information, please see the "AVR32 AP Technical Reference":
|
|
|
|
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
|
|
|
|
In addition to this, the AT32AP7000 chip comes with a large set of
|
|
integrated peripherals, many of which are shared with the AT91 series
|
|
of ARM-based microcontrollers from Atmel. Full data sheet is
|
|
available here:
|
|
|
|
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 7b64fef33c66be648826c0ff9758298ef13d0604
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 14:21:16 2006 +0200
|
|
|
|
Add AVR32 architecture support
|
|
Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
|
|
|
|
This patch adds common infrastructure code for the Atmel AVR32
|
|
architecture. See doc/README.AVR32 for details.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 2da2d9a4766063b9848f3a35ad6025499cf87265
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 13:57:33 2006 +0200
|
|
|
|
Use -g instead of -gstabs in AFLAGS_DEBUG
|
|
Patch by Haavard Skinnemoen, 30 Aug 2006
|
|
|
|
In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
|
|
matter what the target's preferred debugging format is. This patch
|
|
simply replaces -gstabs with -g, so that the default debugging format
|
|
for the architecture is used.
|
|
|
|
commit 965829872169c2996023840d98e1d85ad148d629
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 13:55:18 2006 +0200
|
|
|
|
Fix/workaround broken dependency handling with make 3.81
|
|
Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
|
|
|
|
commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
|
|
Author: Marian Balakowicz <m8@semihalf.com>
|
|
Date: Mon Oct 23 22:17:05 2006 +0200
|
|
|
|
Fix sequoia separate object direcory building problems.
|
|
|
|
commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Fri Oct 20 17:16:35 2006 -0500
|
|
|
|
Use generic I2C register block on 85xx and 86xx.
|
|
|
|
Replace private IMMAP I2C structures with generic reg block
|
|
and allow 86xx to have multiple I2C device busses.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Fri Oct 20 15:54:34 2006 -0500
|
|
|
|
Fix compilation warnings on a few 85xx boards.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Fri Oct 20 15:50:15 2006 -0500
|
|
|
|
Converted all 85xx boards to use a common FSL I2C driver.
|
|
Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
|
|
And removed hard i2c path from a few u-boot.lds scipts too.
|
|
Minor whitespace cleanups along the way.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 4d45f69e362b05892c9e92a7907e5820995612aa
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Oct 19 12:02:24 2006 -0500
|
|
|
|
Rewrite a series of goto statements as a sequences of
|
|
conditional expressions instead.
|
|
|
|
Use consistent return code 0/-1 for good/bad indicators.
|
|
|
|
Include one fewer file if the driver isn't used at all.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 7237c033b02fe295880435f1eb80819a0c987532
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Oct 19 11:02:16 2006 -0500
|
|
|
|
Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
|
|
|
|
in an effort to begin to unify the umpteen FSL I2C drivers that
|
|
are all otherwise very similar.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Oct 19 11:33:52 2006 -0500
|
|
|
|
* Fix a bunch of compiler warnings for gcc 4.0
|
|
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
|
|
commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Oct 17 06:14:31 2006 +0200
|
|
|
|
Add monitor functions for indirect access to PPC440 DCR's
|
|
Patch by Leonid Baryudin, 12 Oct 2006
|
|
|
|
commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Fri Oct 13 16:47:53 2006 -0500
|
|
|
|
Fixed leading whitespace issues.
|
|
Removed spurious LAWAR thing.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Oct 12 10:42:36 2006 -0500
|
|
|
|
Remove unneeded include files and local variable.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Oct 10 00:23:32 2006 -0600
|
|
|
|
Fix possible uninitialized variable compiler warning.
|
|
|
|
When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
|
|
do_bootm_linux() may be uninitialized. There is no possibility in the
|
|
current code that len will get used uninitialized, but this fix follows
|
|
the existing convention of setting both len and data to zero at the same
|
|
time.
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Oct 11 15:13:01 2006 -0500
|
|
|
|
* Fix a bunch of compiler warnings for gcc 4.0
|
|
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
|
|
commit bf651baa365e5447246aad6a633ccd667cf24a39
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed Oct 11 10:10:43 2006 -0500
|
|
|
|
Move "ar" flags to config.mk to allow for silent "make -s"
|
|
|
|
commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Oct 10 17:19:03 2006 -0500
|
|
|
|
Coding style changes to remove local varible blocks
|
|
and reformat a bit nicer.
|
|
|
|
commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Oct 10 17:16:04 2006 -0500
|
|
|
|
Fix whitespace issues.
|
|
|
|
commit 7b382b7125f2397cce63253df62f183e3dfa2770
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Oct 10 17:14:45 2006 -0500
|
|
|
|
Fix whitespace issues.
|
|
|
|
commit e10390ddd736b0dad1528eec4b0fe35c0827139a
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Oct 10 17:06:53 2006 -0500
|
|
|
|
Fix whitespace issues.
|
|
|
|
commit 89875e96ba3f023157bf50d5f8e33bf254964a76
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Oct 10 17:03:43 2006 -0500
|
|
|
|
Ran lindent and cleaned up whitespace issues.
|
|
Format for 80-columns too.
|
|
|
|
commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Oct 10 17:02:22 2006 -0500
|
|
|
|
Fix whitespace and 80-col issues.
|
|
|
|
commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Oct 7 11:36:51 2006 +0200
|
|
|
|
CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
|
|
Patch by Stefan Roese, 07 Oct 2006
|
|
|
|
commit 5bc528fa4da751d472397b308137238a6465afd2
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Oct 7 11:35:25 2006 +0200
|
|
|
|
Update ALPR code (NAND support working now)
|
|
Patch by Stefan Roese, 07 Oct 2006
|
|
|
|
commit 77d5034847d328753b80c46b83f960a14a26f40e
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Oct 7 11:33:03 2006 +0200
|
|
|
|
Remove compile warnings in fpga code
|
|
Patch by Stefan Roese, 07 Oct 2006
|
|
|
|
commit f3443867e90d2979a7dd1c65b0d537777e1f9850
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Oct 7 11:30:52 2006 +0200
|
|
|
|
Add CONFIG_BOARD_RESET to configure board specific reset function
|
|
Patch by Stefan Roese, 07 Oct 2006
|
|
|
|
commit f55df18187e7a45cb73fec4370d12135e6691ae1
|
|
Author: John Traill <john.traill@freescale.com>
|
|
Date: Fri Sep 29 08:23:12 2006 +0100
|
|
|
|
Fix missing tCycle/modfreq calculation.
|
|
|
|
Signed-off-by: John Traill <john.traill@freescale.com>
|
|
|
|
commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Wed Sep 13 10:33:35 2006 -0500
|
|
|
|
Updated config headers to add default FDT-based booting
|
|
|
|
commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Wed Sep 13 10:34:18 2006 -0500
|
|
|
|
Add support for eTSEC 3 & 4 on 8548 CDS
|
|
|
|
* Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
|
|
This will only work on rev 1.3 boards (but doesn't break older boards)
|
|
* Cleaned up some comments to reflect the expanded role of tsec
|
|
in other systems
|
|
|
|
commit 084d648b109c8984f83674043c1a7fa3885ef801
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Wed Sep 13 10:33:56 2006 -0500
|
|
|
|
Added code to support 2.6.18 PCI changes in u-boot
|
|
|
|
* Added code to swizzle the IRQ map for the PCI
|
|
|
|
commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Sep 19 09:34:10 2006 -0500
|
|
|
|
Modified makefile for new build mechanism.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit d14ba6a798beb753e7a864500414fcc2d198b8bc
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Sep 14 08:40:36 2006 -0500
|
|
|
|
Handle 86xx SVR values according to the new Reference Manual.
|
|
Both 8641 and 8641D have SVR == 0x8090, and are distinguished
|
|
by the byte in bits 16-23 instead.
|
|
Thanks to Jason Jin for noticing.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
|
|
Author: Zhang Wei <wei.zhang@freescale.com>
|
|
Date: Mon Aug 28 14:25:31 2006 +0800
|
|
|
|
Fixed an OF-tree off-by-one bug when adding a new property name.
|
|
This bug will cause the kernel booting to pause a long time.
|
|
|
|
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
|
|
(cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
|
|
|
|
commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 29 11:05:09 2006 -0500
|
|
|
|
Remove trailing empty lines.
|
|
|
|
commit cd6d73d5b895a5935ac4fde0a356288142a584e0
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 29 09:48:49 2006 -0500
|
|
|
|
Remove bogus msync and use volatile asm.
|
|
|
|
commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 29 08:17:14 2006 -0500
|
|
|
|
Add myself as maintainer for MPC8641HPCN.
|
|
|
|
commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
|
|
Author: Zhang Wei <wei.zhang@freescale.com>
|
|
Date: Mon Aug 28 14:25:31 2006 +0800
|
|
|
|
Fixed an OF-tree off-by-one bug when adding a new property name.
|
|
This bug will cause the kernel booting to pause a long time.
|
|
|
|
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
|
|
|
|
commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Fri Aug 25 14:38:34 2006 -0400
|
|
|
|
Change ramdiskaddr and dtbaddr
|
|
Remove PEX fluff commands.
|
|
|
|
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Aug 23 13:32:45 2006 -0500
|
|
|
|
* Another small fix for booting with disable_of
|
|
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
|
|
commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed Aug 23 11:04:43 2006 -0500
|
|
|
|
Cleanup and lindent new AHCI driver.
|
|
|
|
commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
|
|
Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
|
|
Date: Wed Aug 23 19:15:12 2006 +0800
|
|
|
|
Add AHCI define and sata support for MPC8641HPCN board.
|
|
|
|
Signed-off-by:Jason Jin<jason.jin@freescale.com>
|
|
|
|
commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
|
|
Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
|
|
Date: Wed Aug 23 19:10:44 2006 +0800
|
|
|
|
Add AHCI support to u-boot
|
|
|
|
Add AHCI support in u-boot, enable the sata disk controllers which
|
|
following the AHCI protocol.
|
|
|
|
Signed-off-by:Jason Jin<jason.jin@freescale.com>
|
|
|
|
commit d8ea2acf5f137cae99417df4f573d036ee384668
|
|
Author: Zhang Wei <wei.zhang@freescale.com>
|
|
Date: Wed Aug 23 17:54:32 2006 +0800
|
|
|
|
Add dtb boot-up parameter to default boot commands.
|
|
|
|
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
|
|
|
|
commit b93775c2036b99baa390ea425c4771895bbc63c4
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 22 18:26:08 2006 -0500
|
|
|
|
Cleanup even more poorly introduced whitespace.
|
|
|
|
commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 22 18:07:00 2006 -0500
|
|
|
|
Cleanup more poorly introduced whitespace.
|
|
|
|
commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 22 17:54:05 2006 -0500
|
|
|
|
Cleanup poorly introduced whitespace.
|
|
|
|
commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 22 12:25:27 2006 -0500
|
|
|
|
General indent and whitespace cleanups.
|
|
|
|
commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 22 12:06:18 2006 -0500
|
|
|
|
General indent and whitespace cleanups.
|
|
|
|
commit 41a0e8b304d3ff55fe27a230507aac79684016ac
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 22 10:42:21 2006 -0500
|
|
|
|
Cleanup compiler warnings.
|
|
|
|
commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Tue Aug 22 09:31:59 2006 -0500
|
|
|
|
Fix disable_of booting
|
|
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
|
|
commit 87a449c8ac396420cb24260f717ea9e6faa82047
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Tue Aug 22 09:23:55 2006 -0500
|
|
|
|
Support for FDT in uImage format, error when using FDT from flash
|
|
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
|
|
commit 75c299c38369d01addd5e054b8a16217b70f4a86
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Tue Aug 15 15:12:55 2006 -0400
|
|
|
|
Unlock cache before kernel starts up for MPC86xx
|
|
|
|
commit 67256678f00c09b0a7f19e862e5c1847553d31bc
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Tue Aug 15 15:13:15 2006 -0400
|
|
|
|
Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
|
|
|
|
commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Tue Aug 15 15:12:55 2006 -0400
|
|
|
|
Unlock cache before kernel starts up for MPC86xx
|
|
|
|
commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Tue Aug 15 15:13:15 2006 -0400
|
|
|
|
Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
|
|
|
|
commit 86c8e17f25e972a7e272950a0735fad84e082b88
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Aug 16 13:59:47 2006 -0500
|
|
|
|
* Fix disable_of booting
|
|
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
|
|
commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Aug 16 10:54:09 2006 -0500
|
|
|
|
* Support for FDT in uImage format, error when using FDT from flash
|
|
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
|
|
commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Aug 15 14:22:35 2006 +0200
|
|
|
|
Add initial support for the ALPR board from Prodrive
|
|
NAND needs some additional testing
|
|
Patch by Heiko Schocher, 15 Aug 2006
|
|
|
|
commit f0ff4692ff3372dec55074a8eb444943ab095abb
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Aug 15 14:15:51 2006 +0200
|
|
|
|
Add FPGA Altera Cyclone 2 support
|
|
Patch by Heiko Schocher, 15 Aug 2006
|
|
|
|
commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Aug 14 15:33:38 2006 -0500
|
|
|
|
Fix BAT0 to actually be cacheable, non-guarded as documented.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 40bc83559db5745681909fd7382ae509567e116d
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed Aug 9 15:32:16 2006 -0500
|
|
|
|
Removed MPC8641HPCN DTS source file from build.
|
|
It is no longer linked into U-Boot; its sources are
|
|
now located in the kernel tree.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:47:03 2006 -0500
|
|
|
|
* Switched default PCI speed for 8540 ADS back to 33MHz
|
|
|
|
* Added comments and a printf to warn that PCI-X won't
|
|
work at 33MHz
|
|
Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:46:35 2006 -0500
|
|
|
|
* Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:46:13 2006 -0500
|
|
|
|
* Added VIA configuration table
|
|
|
|
* Added support for PCI2 on CDS
|
|
Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit c88f9fe66b64247e5b6a38410ba315ca25596d16
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:45:41 2006 -0500
|
|
|
|
* Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 97074ed9655309b64231bc2cee69fe85399f8055
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:45:17 2006 -0500
|
|
|
|
* Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:44:49 2006 -0500
|
|
|
|
* Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit a4e11558b810ef2cddffdf7b9d86bc1130441960
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:44:23 2006 -0500
|
|
|
|
* Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:43:36 2006 -0500
|
|
|
|
* Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:43:00 2006 -0500
|
|
|
|
* Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
|
|
|
|
commit 5498d90312aad9f6bdbf047986027c35b03cd163
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:42:24 2006 -0500
|
|
|
|
* Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
|
|
|
|
commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:41:37 2006 -0500
|
|
|
|
* Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
|
|
|
|
commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
|
|
Author: John Traill <john.traill@freescale.com>
|
|
Date: Wed Aug 9 14:33:50 2006 +0100
|
|
|
|
Add Rapidio support for the MPC8641HPCN
|
|
|
|
Signed-off-by: John Traill <john.traill@freescale.com>
|
|
|
|
commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
|
|
Author: John Traill <john.traill@freescale.com>
|
|
Date: Tue Aug 8 11:32:43 2006 +0100
|
|
|
|
Fix caslat calculation
|
|
|
|
Signed-off-by: John Traill <john.traill@freescale.com>
|
|
|
|
commit 709d3073e74153278e7904a70819bbef7df50e1a
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Aug 3 16:17:56 2006 -0500
|
|
|
|
Convert to mac-address in ethernet nodes.
|
|
|
|
commit 71748af833ca1017edf1415be376366ff2937d17
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Fri Jul 28 12:41:35 2006 -0400
|
|
|
|
Correct the irq value of DUART2
|
|
|
|
commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Fri Jul 28 12:41:41 2006 -0400
|
|
|
|
Change the space size of PEX IO in README
|
|
|
|
commit 239db37c94f7a92941c4465feceb867c609241c5
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Fri Jul 28 12:41:18 2006 -0400
|
|
|
|
Move get_board_sys_clk to board directory
|
|
|
|
commit 492900b985439fbce1a118afde1e35def870db03
|
|
Author: John Traill <john.traill@freescale.com>
|
|
Date: Fri Jul 28 09:03:54 2006 +0100
|
|
|
|
Fix 8641HPCN pollution
|
|
|
|
commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
|
|
Author: John Traill <john.traill@freescale.com>
|
|
Date: Fri Jul 28 08:16:06 2006 +0100
|
|
|
|
Fix 8641HPCN timebase
|
|
|
|
commit c86360b830f1eecd7a72208575dde4f57879faea
|
|
Author: Zhang Wei <wei.zhang@freescale.com>
|
|
Date: Fri Jul 28 00:01:34 2006 +0800
|
|
|
|
Fixed OF device tree of mpc86xxhpcn board.
|
|
|
|
The changes works in with kernel irq mapping rework.
|
|
|
|
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
|
|
|
|
commit bea3f28d285942bf3f7ab339ce85178ded544225
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Wed Jul 12 10:48:05 2006 -0400
|
|
|
|
Add support for reading and writing mac addresses to or from ID EEPROM.
|
|
|
|
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
|
|
With attached patch, we can use command "mac/mac read/mac save/"
|
|
to read and write EEPROM under u-boot prompt.
|
|
|
|
U-boot will calculate the checksum of EEPROM while bootup,
|
|
if it is right, then u-boot will check whether the mac address
|
|
of eTSEC0/1/2/3 is availalbe (non-zero).
|
|
|
|
If there is mac address availabe in EEPROM, u-boot will use it,
|
|
otherewise, u-boot will use the mac address defined in
|
|
MPC8641HPCN.h. This matches the requirement to set unique mac address
|
|
for each TSEC port.
|
|
|
|
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
|
|
Signed-off-by: York Sun <yorksun@freescale.com>
|
|
|
|
commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
|
|
Author: Jin Zhengxiong <Jason.Jin@freescale.com>
|
|
Date: Thu Jul 13 10:35:10 2006 -0500
|
|
|
|
Fixed initrd issue by define big RAM
|
|
|
|
Signed-off-by:Jason Jin <Jason.jin@freescale.com>
|
|
|
|
commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
|
|
Author: Jason Jin <Jason.jin@freescale.com>
|
|
Date: Fri Jul 7 10:01:45 2006 -0500
|
|
|
|
We made a u-boot patch to fix the hang up issue
|
|
when booting filesystem from ramdisk.
|
|
|
|
Signed-off-by:Jason Jin <Jason.jin@freescale.com>
|
|
|
|
commit 38433ccc5850ee70549af0b2bc5b920355ef5388
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:47:03 2006 -0500
|
|
|
|
* Switched default PCI speed for 8540 ADS back to 33MHz
|
|
* Added comments and a printf to warn that PCI-X won't
|
|
work at 33MHz
|
|
Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:46:35 2006 -0500
|
|
|
|
* Fixed a bug where 8555 PCI code used the old variable and
|
|
function names
|
|
Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:46:13 2006 -0500
|
|
|
|
* Added VIA configuration table
|
|
* Added support for PCI2 on CDS
|
|
Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:45:41 2006 -0500
|
|
|
|
* Fixed PCI memory definitions
|
|
Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 087454609e47295443af793a282cddcd91a5f49c
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:45:17 2006 -0500
|
|
|
|
* Added support for initializing second PCI bus on 85xx
|
|
Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:44:49 2006 -0500
|
|
|
|
* Added PCI-X #defines for PCI-X initialization
|
|
Patch by Andy Fleming on 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:44:23 2006 -0500
|
|
|
|
* Made sure the code which disables prefetch for PCI devices
|
|
sets the size of the prefetch region to 0
|
|
Patch by Andy Fleming on 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 40d5fa35d02df22580593bf0039ab173367e8ef0
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:43:36 2006 -0500
|
|
|
|
* Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
|
|
Patch by Jon Loeliger 17-Jan-2006
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit be7e8b0cb5a0c49dc180075b96df296a893bf146
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:43:00 2006 -0500
|
|
|
|
* Removed the oftree.dts for stxxtx in light of the changes
|
|
to the flat device tree handling code
|
|
Patch by Matthew McClintock 26-June-2006
|
|
|
|
commit 1b380ec225665e73959677f3893dc658c5925e05
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:42:24 2006 -0500
|
|
|
|
* Patch to modify ft_build.c to update flat device trees in place
|
|
Patch by Matthew McClintock 26-June-2006
|
|
|
|
commit 98a9c4d468a942a09ebe8979bec508017f3e4462
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:41:37 2006 -0500
|
|
|
|
* Modify bootm command to support booting with flat device trees
|
|
Patch by Matthew McClintock 26-June-2006
|
|
|
|
commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
|
|
Author: Jin Zhengxiong <Jason.Jin@freescale.com>
|
|
Date: Wed Jun 28 08:43:56 2006 -0500
|
|
|
|
Change Id to symbolic name for RTL8139
|
|
|
|
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
|
|
|
|
commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
|
|
Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
|
|
Date: Tue Jun 27 18:12:10 2006 +0800
|
|
|
|
Fix RTL8139 in big endian
|
|
|
|
signed-off-by: Jason Jin <Jason.Jin@freescale.com>
|
|
signed-off-by: Wei Zhang <wei.zhang@freescale.com>
|
|
|
|
commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
|
|
Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
|
|
Date: Tue Jun 27 18:12:23 2006 +0800
|
|
|
|
Fix Tsec bug when no link
|
|
|
|
When tftp a non-exist file from the tftp server, u-boot will check
|
|
the link of all eth port. The original file will return wrong link
|
|
state on the no link ports.
|
|
|
|
signed-off-by: Jason Jin <Jason.Jin@freescale.com>
|
|
|
|
commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
|
|
Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
|
|
Date: Tue Jun 27 18:12:02 2006 +0800
|
|
|
|
Fix bug for io_bar size during pci scan
|
|
|
|
During the pci scan process, Some devices return bar_reponse with the
|
|
highest bytes 0, such as the pci bridge in uli1575 return bar_response
|
|
with 0xffffff, So the bar_size should be manually set under 64K.
|
|
|
|
Signed-off-by: Jason Jin <jason.jin@freescale.com>
|
|
|
|
commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
|
|
Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
|
|
Date: Tue Jun 27 18:11:54 2006 +0800
|
|
|
|
Enable PCIE1 for MPC8641HPCN board
|
|
|
|
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
|
|
|
|
commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Jun 22 08:51:46 2006 -0500
|
|
|
|
Fix bug in 8641hpcn reset command with no args.
|
|
|
|
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
|
|
Acked-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
|
|
Author: Zhang Wei <wei.zhang@freescale.com>
|
|
Date: Tue Jun 20 17:47:15 2006 +0800
|
|
|
|
Reworked IRQ mapping in OF-tree.
|
|
|
|
commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Jun 15 21:33:37 2006 -0500
|
|
|
|
Do not enable address translation on secondary CPUs.
|
|
Do not set up BATs on secondary CPUs. Let Linux do the nasty.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 8ecc971618f56029ad99d3516f8b297a6ed58971
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jun 7 10:53:55 2006 -0500
|
|
|
|
Fix a get_board_sys_clk() use-before-def warning.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@jdl.com>
|
|
|
|
commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jun 7 10:52:49 2006 -0500
|
|
|
|
Allow DTC path to be passed in.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@jdl.com>
|
|
|
|
commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Tue Jun 6 16:54:29 2006 -0400
|
|
|
|
Modify the IRQ of DUART2
|
|
|
|
commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed May 31 13:55:35 2006 -0500
|
|
|
|
Review cleanups.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed May 31 12:44:44 2006 -0500
|
|
|
|
White space cleanup.
|
|
Some 80-column cleanups.
|
|
Convert printf() to puts() where possible.
|
|
Use #include "spd_sdram.h" as needed.
|
|
Enhanced reset command usage message a bit.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed May 31 11:39:34 2006 -0500
|
|
|
|
Removed unneeded local_bus_init() from 8641HPCN board.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 4d3d729c16c392d2982d3266b659d333c927697d
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed May 31 11:24:28 2006 -0500
|
|
|
|
Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit b2a941de060350ad15878d8219825f4950e9bb8e
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed May 31 10:07:28 2006 -0500
|
|
|
|
Remove dead debug code.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@jdl.com>
|
|
|
|
commit 126aa70f10ba3d20e0a6f4d32328250513b77770
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue May 30 17:47:00 2006 -0500
|
|
|
|
Move mpc86xx PIXIS code to board directory
|
|
|
|
First cut at moving the PIXIS platform code out of
|
|
the 86xx cpu directory and into board/mpc8641hpcn
|
|
where it belongs.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
|
|
Author: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Date: Tue May 30 09:10:32 2006 -0500
|
|
|
|
Improve "reset" command's interaction with watchdog.
|
|
|
|
"reset altbank" will reset another bank WITHOUT watch dog timer enabled
|
|
"reset altbank wd" will reset another bank WITH watch dog enabled
|
|
"diswd" will disable watch dog after u-boot boots up successfully
|
|
|
|
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
|
|
|
|
commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
|
|
Author: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Date: Tue May 30 08:51:19 2006 -0500
|
|
|
|
Fix two SDRAM setup bugs.
|
|
|
|
Fix ECC setup bug.
|
|
Enable 1T/2T based on number of DIMMs present.
|
|
|
|
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
|
|
|
|
commit d11fec5015334deb2010e36ce00bb118cc5429a5
|
|
Author: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Date: Fri May 26 10:24:48 2006 -0500
|
|
|
|
Add first draft of the MPC8641HPCN doc/README.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@jdl.com>
|
|
|
|
commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
|
|
Author: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Date: Fri May 26 10:13:04 2006 -0500
|
|
|
|
Added pci@8000 block.
|
|
Updated ethernet interrupt mappings (moved up 48).
|
|
Cleaned up a few comments.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@jdl.com>
|
|
|
|
commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
|
|
Author: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Date: Fri May 26 10:01:16 2006 -0500
|
|
|
|
Allow args on reset command.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@jdl.com>
|
|
|
|
commit 14e37081ff3cac7ebe6e93836523429853b6b292
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Fri May 19 13:28:39 2006 -0500
|
|
|
|
Change arbitration to round-robin for SMP linux.
|
|
|
|
commit 9a655876e5995be80f49054e2509500e871e4d3a
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Fri May 19 13:26:34 2006 -0500
|
|
|
|
Enable dual DDR controllers and interleaving.
|
|
|
|
commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Fri May 19 13:22:44 2006 -0500
|
|
|
|
Update 86xx address map and LAWBARs.
|
|
|
|
commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Fri May 19 13:14:15 2006 -0500
|
|
|
|
Remove L2 Cache invalidate polling.
|
|
|
|
commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Fri May 19 12:33:09 2006 -0500
|
|
|
|
Enable 2nd CPU and I2C.
|
|
|
|
commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon May 15 07:26:56 2006 -0500
|
|
|
|
Update interrupt mapping.
|
|
|
|
commit 6cfea33477b04b63ed47386ed1629529484c33ba
|
|
Author: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Date: Wed May 10 09:38:06 2006 -0500
|
|
|
|
Remove unneeded INIT_RAM_LOCK cache twiddling.
|
|
Correctly tracks r29 as global data pointer now.
|
|
|
|
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
|
|
|
|
commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed May 10 09:33:07 2006 -0500
|
|
|
|
Remove unnecessary flash.c file.
|
|
|
|
commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue May 9 08:23:49 2006 -0500
|
|
|
|
Get MPC8641HPCN flash images working.
|
|
|
|
Enable the CFI driver.
|
|
Remove bogus LAWBAR7 cruft.
|
|
Use correct TEXT_BASE, Fixup load script.
|
|
Enable SPD EEPROM during DDR setup.
|
|
Use generic RFC 1918 IP addresses by default.
|
|
|
|
commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Apr 27 10:15:16 2006 -0500
|
|
|
|
Cleanup whitespaces and style issues.
|
|
Removed //-style comments.
|
|
Use 80-column lines.
|
|
Remove trailing whitespace.
|
|
Remove dead code and debug cruft.
|
|
|
|
commit a2320a6bf8113a09544c42d160d10ac69d049a03
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Apr 27 08:22:39 2006 -0500
|
|
|
|
Revert bad PCI prefetch limit change.
|
|
|
|
commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed Apr 26 17:58:56 2006 -0500
|
|
|
|
Initial support for MPC8641 HPCN board.
|