u-boot/drivers/sound/broadwell_i2s.c
Simon Glass f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00

309 lines
7.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Intel Broadwell I2S driver
*
* Copyright 2019 Google LLC
*
* Modified from dc i2s/broadwell/broadwell.c
*/
#define LOG_CATEGORY UCLASS_I2S
#include <common.h>
#include <dm.h>
#include <i2s.h>
#include <log.h>
#include <time.h>
#include <asm/io.h>
#include "broadwell_i2s.h"
enum {
BDW_SHIM_START_ADDRESS = 0xfb000,
BDW_SSP0_START_ADDRESS = 0xfc000,
BDW_SSP1_START_ADDRESS = 0xfd000,
};
struct broadwell_i2s_priv {
enum frame_sync_rel_timing_t rel_timing;
enum frame_sync_pol_t sfrm_polarity;
enum end_transfer_state_t end_transfer_state;
enum clock_mode_t sclk_mode;
uint sclk_dummy_stop; /* 0-31 */
uint sclk_frame_width; /* 1-38 */
struct i2s_shim_regs *shim;
struct broadwell_i2s_regs *regs;
};
static void init_shim_csr(struct broadwell_i2s_priv *priv)
{
/*
* Select SSP clock
* Turn off low power clock
* Set PIO mode
* Stall DSP core
*/
clrsetbits_le32(&priv->shim->csr,
SHIM_CS_S0IOCS | SHIM_CS_LPCS | SHIM_CS_DCS_MASK,
SHIM_CS_S1IOCS | SHIM_CS_SBCS_SSP1_24MHZ |
SHIM_CS_SBCS_SSP0_24MHZ | SHIM_CS_SDPM_PIO_SSP1 |
SHIM_CS_SDPM_PIO_SSP0 | SHIM_CS_STALL |
SHIM_CS_DCS_DSP32_AF32);
}
static void init_shim_clkctl(struct i2s_uc_priv *uc_priv,
struct broadwell_i2s_priv *priv)
{
u32 clkctl = readl(&priv->shim->clkctl);
/* Set 24Mhz mclk, prevent local clock gating, enable SSP0 clock */
clkctl &= SHIM_CLKCTL_RESERVED;
clkctl |= SHIM_CLKCTL_MCLK_24MHZ | SHIM_CLKCTL_DCPLCG;
/* Enable requested SSP interface */
if (uc_priv->id)
clkctl |= SHIM_CLKCTL_SCOE_SSP1 | SHIM_CLKCTL_SFLCGB_SSP1_CGD;
else
clkctl |= SHIM_CLKCTL_SCOE_SSP0 | SHIM_CLKCTL_SFLCGB_SSP0_CGD;
writel(clkctl, &priv->shim->clkctl);
}
static void init_sscr0(struct i2s_uc_priv *uc_priv,
struct broadwell_i2s_priv *priv)
{
u32 sscr0;
uint scale;
/* Set data size based on BPS */
if (uc_priv->bitspersample > 16)
sscr0 = (uc_priv->bitspersample - 16 - 1) << SSP_SSC0_DSS_SHIFT
| SSP_SSC0_EDSS;
else
sscr0 = (uc_priv->bitspersample - 1) << SSP_SSC0_DSS_SHIFT;
/* Set network mode, Stereo PSP frame format */
sscr0 |= SSP_SSC0_MODE_NETWORK |
SSP_SSC0_FRDC_STEREO |
SSP_SSC0_FRF_PSP |
SSP_SSC0_TIM |
SSP_SSC0_RIM |
SSP_SSC0_ECS_PCH |
SSP_SSC0_NCS_PCH |
SSP_SSC0_ACS_PCH;
/* Scale 24MHz MCLK */
scale = uc_priv->audio_pll_clk / uc_priv->samplingrate / uc_priv->bfs;
sscr0 |= scale << SSP_SSC0_SCR_SHIFT;
writel(sscr0, &priv->regs->sscr0);
}
static void init_sscr1(struct broadwell_i2s_priv *priv)
{
u32 sscr1 = readl(&priv->regs->sscr1);
sscr1 &= SSP_SSC1_RESERVED;
/* Set as I2S master */
sscr1 |= SSP_SSC1_SCLKDIR_MASTER | SSP_SSC1_SCLKDIR_MASTER;
/* Enable TXD tristate behavior for PCH */
sscr1 |= SSP_SSC1_TTELP | SSP_SSC1_TTE;
/* Disable DMA Tx/Rx service request */
sscr1 |= SSP_SSC1_TSRE | SSP_SSC1_RSRE;
/* Clock on during transfer */
sscr1 |= SSP_SSC1_SCFR;
/* Set FIFO thresholds */
sscr1 |= SSP_FIFO_SIZE << SSP_SSC1_RFT_SHIFT;
sscr1 |= SSP_FIFO_SIZE << SSP_SSC1_TFT_SHIFT;
/* Disable interrupts */
sscr1 &= ~(SSP_SSC1_EBCEI | SSP_SSC1_TINTE | SSP_SSC1_PINTE);
sscr1 &= ~(SSP_SSC1_LBM | SSP_SSC1_RWOT);
writel(sscr1, &priv->regs->sscr1);
}
static void init_sspsp(struct broadwell_i2s_priv *priv)
{
u32 sspsp = readl(&priv->regs->sspsp);
sspsp &= SSP_PSP_RESERVED;
sspsp |= priv->sclk_mode << SSP_PSP_SCMODE_SHIFT;
sspsp |= (priv->sclk_dummy_stop << SSP_PSP_DMYSTOP_SHIFT) &
SSP_PSP_DMYSTOP_MASK;
sspsp |= (priv->sclk_dummy_stop >> 2 << SSP_PSP_EDYMSTOP_SHIFT) &
SSP_PSP_EDMYSTOP_MASK;
sspsp |= priv->sclk_frame_width << SSP_PSP_SFRMWDTH_SHIFT;
/* Frame Sync Relative Timing */
if (priv->rel_timing == NEXT_FRMS_AFTER_END_OF_T4)
sspsp |= SSP_PSP_FSRT;
else
sspsp &= ~SSP_PSP_FSRT;
/* Serial Frame Polarity */
if (priv->sfrm_polarity == SSP_FRMS_ACTIVE_HIGH)
sspsp |= SSP_PSP_SFRMP;
else
sspsp &= ~SSP_PSP_SFRMP;
/* End Data Transfer State */
if (priv->end_transfer_state == SSP_END_TRANSFER_STATE_LOW)
sspsp &= ~SSP_PSP_ETDS;
else
sspsp |= SSP_PSP_ETDS;
writel(sspsp, &priv->regs->sspsp);
}
static void init_ssp_time_slot(struct broadwell_i2s_priv *priv)
{
writel(3, &priv->regs->sstsa);
writel(3, &priv->regs->ssrsa);
}
static int bdw_i2s_init(struct udevice *dev)
{
struct i2s_uc_priv *uc_priv = dev_get_uclass_priv(dev);
struct broadwell_i2s_priv *priv = dev_get_priv(dev);
init_shim_csr(priv);
init_shim_clkctl(uc_priv, priv);
init_sscr0(uc_priv, priv);
init_sscr1(priv);
init_sspsp(priv);
init_ssp_time_slot(priv);
return 0;
}
static void bdw_i2s_enable(struct broadwell_i2s_priv *priv)
{
setbits_le32(&priv->regs->sscr0, SSP_SSC0_SSE);
setbits_le32(&priv->regs->sstsa, SSP_SSTSA_EN);
}
static void bdw_i2s_disable(struct broadwell_i2s_priv *priv)
{
clrbits_le32(&priv->regs->sstsa, SSP_SSTSA_EN);
clrbits_le32(&priv->regs->sstsa, SSP_SSTSA_EN);
}
static int broadwell_i2s_tx_data(struct udevice *dev, void *data,
uint data_size)
{
struct broadwell_i2s_priv *priv = dev_get_priv(dev);
u32 *ptr = data;
log_debug("data=%p, data_size=%x\n", data, data_size);
if (data_size < SSP_FIFO_SIZE) {
log_err("Invalid I2S data size\n");
return -ENODATA;
}
/* Enable I2S interface */
bdw_i2s_enable(priv);
/* Transfer data */
while (data_size > 0) {
ulong start = timer_get_us() + 100000;
/* Write data if transmit FIFO has room */
if (readl(&priv->regs->sssr) & SSP_SSS_TNF) {
writel(*ptr++, &priv->regs->ssdr);
data_size -= sizeof(*ptr);
} else {
if ((long)(timer_get_us() - start) > 0) {
/* Disable I2S interface */
bdw_i2s_disable(priv);
log_debug("I2S Transfer Timeout\n");
return -ETIMEDOUT;
}
}
}
/* Disable I2S interface */
bdw_i2s_disable(priv);
log_debug("done\n");
return 0;
}
static int broadwell_i2s_probe(struct udevice *dev)
{
struct i2s_uc_priv *uc_priv = dev_get_uclass_priv(dev);
struct broadwell_i2s_priv *priv = dev_get_priv(dev);
struct udevice *adsp = dev_get_parent(dev);
u32 bar0, offset;
int ret;
bar0 = dm_pci_read_bar32(adsp, 0);
if (!bar0) {
log_debug("Cannot read adsp bar0\n");
return -EINVAL;
}
offset = dev_read_addr_index(dev, 0);
if (offset == FDT_ADDR_T_NONE) {
log_debug("Cannot read address index 0\n");
return -EINVAL;
}
uc_priv->base_address = bar0 + offset;
/*
* Hard-code these values. If other settings are required we can add
* this to the device tree.
*/
uc_priv->rfs = 64;
uc_priv->bfs = 32;
uc_priv->audio_pll_clk = 24 * 1000 * 1000;
uc_priv->samplingrate = 48000;
uc_priv->bitspersample = 16;
uc_priv->channels = 2;
uc_priv->id = 0;
priv->shim = (struct i2s_shim_regs *)uc_priv->base_address;
priv->sfrm_polarity = SSP_FRMS_ACTIVE_LOW;
priv->end_transfer_state = SSP_END_TRANSFER_STATE_LOW;
priv->sclk_mode = SCLK_MODE_DDF_DSR_ISL;
priv->rel_timing = NEXT_FRMS_WITH_LSB_PREVIOUS_FRM;
priv->sclk_dummy_stop = 0;
priv->sclk_frame_width = 31;
offset = dev_read_addr_index(dev, 1 + uc_priv->id);
if (offset == FDT_ADDR_T_NONE) {
log_debug("Cannot read address index %d\n", 1 + uc_priv->id);
return -EINVAL;
}
log_debug("bar0=%x, uc_priv->base_address=%x, offset=%x\n", bar0,
uc_priv->base_address, offset);
priv->regs = (struct broadwell_i2s_regs *)(bar0 + offset);
ret = bdw_i2s_init(dev);
if (ret)
return ret;
return 0;
}
static const struct i2s_ops broadwell_i2s_ops = {
.tx_data = broadwell_i2s_tx_data,
};
static const struct udevice_id broadwell_i2s_ids[] = {
{ .compatible = "intel,broadwell-i2s" },
{ }
};
U_BOOT_DRIVER(broadwell_i2s) = {
.name = "broadwell_i2s",
.id = UCLASS_I2S,
.of_match = broadwell_i2s_ids,
.probe = broadwell_i2s_probe,
.ops = &broadwell_i2s_ops,
.priv_auto_alloc_size = sizeof(struct broadwell_i2s_priv),
};