1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
238 lines
6.3 KiB
C
238 lines
6.3 KiB
C
/*
|
|
* (C) Copyright 2002, 2003
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
* Gary Jennejohn <garyj@denx.de>
|
|
* David Mueller <d.mueller@elsoft.ch>
|
|
*
|
|
* Configuation settings for the MPL VCMA9 board.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
|
|
#define MACH_TYPE_MPL_VCMA9 227
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_ARM920T /* This is an ARM920T Core */
|
|
#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24x0-type SoC */
|
|
#define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */
|
|
#define CONFIG_VCMA9 /* on a MPL VCMA9 Board */
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_MPL_VCMA9 /* Machine type */
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0x0
|
|
|
|
#define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
|
|
|
|
/* input clock of PLL (VCMA9 has 12MHz input clock) */
|
|
#define CONFIG_SYS_CLK_FREQ 12000000
|
|
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_CACHE
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_USB
|
|
#define CONFIG_CMD_REGINFO
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_ELF
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_BSP
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_NAND_YAFFS
|
|
|
|
#define CONFIG_BOARD_LATE_INIT
|
|
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
#define CONFIG_CMDLINE_EDITING
|
|
|
|
/*
|
|
* I2C stuff:
|
|
* the MPL VCMA9 is equipped with an ATMEL 24C256 EEPROM at
|
|
* address 0x50 with 16bit addressing
|
|
*/
|
|
#define CONFIG_HARD_I2C /* I2C with hardware support */
|
|
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */
|
|
#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave addr */
|
|
|
|
/* we use the built-in I2C controller */
|
|
#define CONFIG_DRIVER_S3C24X0_I2C
|
|
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
/* use EEPROM for environment vars */
|
|
#define CONFIG_ENV_IS_IN_EEPROM 1
|
|
/* environment starts at offset 0 */
|
|
#define CONFIG_ENV_OFFSET 0x000
|
|
/* 2KB should be more than enough */
|
|
#define CONFIG_ENV_SIZE 0x800
|
|
|
|
#undef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
|
|
/* 64 bytes page write mode on 24C256 */
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_CS8900 /* we have a CS8900 on-board */
|
|
#define CONFIG_CS8900_BASE 0x20000300
|
|
#define CONFIG_CS8900_BUS16
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*/
|
|
#define CONFIG_S3C24X0_SERIAL
|
|
#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on VCMA9 */
|
|
|
|
/* USB support (currently only works with D-cache off) */
|
|
#define CONFIG_USB_OHCI
|
|
#define CONFIG_USB_OHCI_S3C24XX
|
|
#define CONFIG_USB_KEYBOARD
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
/* Enable needed helper functions */
|
|
#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */
|
|
|
|
/* RTC */
|
|
#define CONFIG_RTC_S3C24X0
|
|
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BAUDRATE 9600
|
|
|
|
#define CONFIG_BOOTDELAY 5
|
|
#define CONFIG_BOOT_RETRY_TIME -1
|
|
#define CONFIG_RESET_TO_RETRY
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
|
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
#define CONFIG_IPADDR 10.0.0.110
|
|
#define CONFIG_SERVERIP 10.0.0.1
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
/* speed to run kgdb serial port */
|
|
#define CONFIG_KGDB_BAUDRATE 115200
|
|
/* what's this ? it's not used anywhere */
|
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
|
#endif
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_PROMPT "VCMA9 # "
|
|
#define CONFIG_SYS_CBSIZE 256
|
|
/* Print Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
/* Boot Argument Buffer Size */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
|
|
#define CONFIG_DISPLAY_BOARDINFO /* Display board info */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x31FFFFFF /* 32 MB in DRAM */
|
|
|
|
#define CONFIG_SYS_ALT_MEMTEST
|
|
#define CONFIG_SYS_LOAD_ADDR 0x30800000
|
|
|
|
/* we configure PWM Timer 4 to 1ms 1000Hz */
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
/* support additional compression methods */
|
|
#define CONFIG_BZIP2
|
|
#define CONFIG_LZO
|
|
#define CONFIG_LZMA
|
|
|
|
/* Ident */
|
|
/*#define VERSION_TAG "released"*/
|
|
#define VERSION_TAG "unstable"
|
|
#define CONFIG_IDENT_STRING "\n(c) 2003 - 2011 by MPL AG Switzerland, " \
|
|
"MEV-10080-001 " VERSION_TAG
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
|
|
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
|
|
|
|
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
|
|
|
/* FLASH and environment organization */
|
|
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define CONFIG_FLASH_CFI_LEGACY
|
|
#define CONFIG_SYS_FLASH_LEGACY_512Kx16
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 45
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
|
|
#define CONFIG_SYS_MAX_FLASH_SECT (19)
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
* BZIP2 / LZO / LZMA need a lot of RAM
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
|
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
|
|
/* NAND configuration */
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_NAND_S3C2410
|
|
#define CONFIG_SYS_S3C2410_NAND_HWECC
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x4E000000
|
|
#define CONFIG_S3C24XX_CUSTOM_NAND_TIMING
|
|
#define CONFIG_S3C24XX_TACLS 1
|
|
#define CONFIG_S3C24XX_TWRPH0 5
|
|
#define CONFIG_S3C24XX_TWRPH1 3
|
|
#endif
|
|
|
|
#define MULTI_PURPOSE_SOCKET_ADDR 0x08000000
|
|
|
|
/* File system */
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_UBI
|
|
#define CONFIG_CMD_UBIFS
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_YAFFS2
|
|
#define CONFIG_RBTREE
|
|
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_LZO
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
|
|
#endif /* __CONFIG_H */
|