u-boot/drivers/pci/pci_auto_old.c
Mario Six 904c47fc7d mpc83xx: Make distinct caddy2 config
vme8349.h contains two separate boards: The vme8349 itself, and the
caddy2 board. The caddy2 board is chosen by setting certain config
variables. Create a proper config file for the caddy2 board to make
Kconfig migration easier.

Furthermore, simplify the vme8349 and caddy2 configs by keeping only the
options necessary for each board.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20 13:50:34 +02:00

405 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* PCI autoconfiguration library (legacy version, do not change)
*
* Author: Matt Porter <mporter@mvista.com>
*
* Copyright 2000 MontaVista Software Inc.
*/
#include <common.h>
#include <errno.h>
#include <pci.h>
/*
* Do not change this file. Instead, convert your board to use CONFIG_DM_PCI
* and change pci_auto.c.
*/
/* the user can define CONFIG_SYS_PCI_CACHE_LINE_SIZE to avoid problems */
#ifndef CONFIG_SYS_PCI_CACHE_LINE_SIZE
#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8
#endif
/*
*
*/
void pciauto_setup_device(struct pci_controller *hose,
pci_dev_t dev, int bars_num,
struct pci_region *mem,
struct pci_region *prefetch,
struct pci_region *io)
{
u32 bar_response;
pci_size_t bar_size;
u16 cmdstat = 0;
int bar, bar_nr = 0;
#ifndef CONFIG_PCI_ENUM_ONLY
u8 header_type;
int rom_addr;
pci_addr_t bar_value;
struct pci_region *bar_res;
int found_mem64 = 0;
#endif
u16 class;
pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;
for (bar = PCI_BASE_ADDRESS_0;
bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) {
/* Tickle the BAR and get the response */
#ifndef CONFIG_PCI_ENUM_ONLY
pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
#endif
pci_hose_read_config_dword(hose, dev, bar, &bar_response);
/* If BAR is not implemented go to the next BAR */
if (!bar_response)
continue;
#ifndef CONFIG_PCI_ENUM_ONLY
found_mem64 = 0;
#endif
/* Check the BAR type and set our address mask */
if (bar_response & PCI_BASE_ADDRESS_SPACE) {
bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))
& 0xffff) + 1;
#ifndef CONFIG_PCI_ENUM_ONLY
bar_res = io;
#endif
debug("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ",
bar_nr, (unsigned long long)bar_size);
} else {
if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
PCI_BASE_ADDRESS_MEM_TYPE_64) {
u32 bar_response_upper;
u64 bar64;
#ifndef CONFIG_PCI_ENUM_ONLY
pci_hose_write_config_dword(hose, dev, bar + 4,
0xffffffff);
#endif
pci_hose_read_config_dword(hose, dev, bar + 4,
&bar_response_upper);
bar64 = ((u64)bar_response_upper << 32) | bar_response;
bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
#ifndef CONFIG_PCI_ENUM_ONLY
found_mem64 = 1;
#endif
} else {
bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
}
#ifndef CONFIG_PCI_ENUM_ONLY
if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
bar_res = prefetch;
else
bar_res = mem;
debug("PCI Autoconfig: BAR %d, %s, size=0x%llx, ",
bar_nr, bar_res == prefetch ? "Prf" : "Mem",
(unsigned long long)bar_size);
#endif
}
#ifndef CONFIG_PCI_ENUM_ONLY
if (pciauto_region_allocate(bar_res, bar_size,
&bar_value, found_mem64) == 0) {
/* Write it out and update our limit */
pci_hose_write_config_dword(hose, dev, bar, (u32)bar_value);
if (found_mem64) {
bar += 4;
#ifdef CONFIG_SYS_PCI_64BIT
pci_hose_write_config_dword(hose, dev, bar, (u32)(bar_value>>32));
#else
/*
* If we are a 64-bit decoder then increment to the
* upper 32 bits of the bar and force it to locate
* in the lower 4GB of memory.
*/
pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
#endif
}
}
#endif
cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
debug("\n");
bar_nr++;
}
#ifndef CONFIG_PCI_ENUM_ONLY
/* Configure the expansion ROM address */
pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);
header_type &= 0x7f;
if (header_type != PCI_HEADER_TYPE_CARDBUS) {
rom_addr = (header_type == PCI_HEADER_TYPE_NORMAL) ?
PCI_ROM_ADDRESS : PCI_ROM_ADDRESS1;
pci_hose_write_config_dword(hose, dev, rom_addr, 0xfffffffe);
pci_hose_read_config_dword(hose, dev, rom_addr, &bar_response);
if (bar_response) {
bar_size = -(bar_response & ~1);
debug("PCI Autoconfig: ROM, size=%#x, ",
(unsigned int)bar_size);
if (pciauto_region_allocate(mem, bar_size,
&bar_value, false) == 0) {
pci_hose_write_config_dword(hose, dev, rom_addr,
bar_value);
}
cmdstat |= PCI_COMMAND_MEMORY;
debug("\n");
}
}
#endif
/* PCI_COMMAND_IO must be set for VGA device */
pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
if (class == PCI_CLASS_DISPLAY_VGA)
cmdstat |= PCI_COMMAND_IO;
pci_hose_write_config_word(hose, dev, PCI_COMMAND, cmdstat);
pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE,
CONFIG_SYS_PCI_CACHE_LINE_SIZE);
pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
}
void pciauto_prescan_setup_bridge(struct pci_controller *hose,
pci_dev_t dev, int sub_bus)
{
struct pci_region *pci_mem;
struct pci_region *pci_prefetch;
struct pci_region *pci_io;
u16 cmdstat, prefechable_64;
pci_mem = hose->pci_mem;
pci_prefetch = hose->pci_prefetch;
pci_io = hose->pci_io;
pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
pci_hose_read_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
&prefechable_64);
prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
/* Configure bus number registers */
pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS,
PCI_BUS(dev) - hose->first_busno);
pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS,
sub_bus - hose->first_busno);
pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);
if (pci_mem) {
/* Round memory allocator to 1MB boundary */
pciauto_region_align(pci_mem, 0x100000);
/* Set up memory and I/O filter limits, assume 32-bit I/O space */
pci_hose_write_config_word(hose, dev, PCI_MEMORY_BASE,
(pci_mem->bus_lower & 0xfff00000) >> 16);
cmdstat |= PCI_COMMAND_MEMORY;
}
if (pci_prefetch) {
/* Round memory allocator to 1MB boundary */
pciauto_region_align(pci_prefetch, 0x100000);
/* Set up memory and I/O filter limits, assume 32-bit I/O space */
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
(pci_prefetch->bus_lower & 0xfff00000) >> 16);
if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
#ifdef CONFIG_SYS_PCI_64BIT
pci_hose_write_config_dword(hose, dev,
PCI_PREF_BASE_UPPER32,
pci_prefetch->bus_lower >> 32);
#else
pci_hose_write_config_dword(hose, dev,
PCI_PREF_BASE_UPPER32,
0x0);
#endif
cmdstat |= PCI_COMMAND_MEMORY;
} else {
/* We don't support prefetchable memory for now, so disable */
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);
if (prefechable_64 == PCI_PREF_RANGE_TYPE_64) {
pci_hose_write_config_word(hose, dev, PCI_PREF_BASE_UPPER32, 0x0);
pci_hose_write_config_word(hose, dev, PCI_PREF_LIMIT_UPPER32, 0x0);
}
}
if (pci_io) {
/* Round I/O allocator to 4KB boundary */
pciauto_region_align(pci_io, 0x1000);
pci_hose_write_config_byte(hose, dev, PCI_IO_BASE,
(pci_io->bus_lower & 0x0000f000) >> 8);
pci_hose_write_config_word(hose, dev, PCI_IO_BASE_UPPER16,
(pci_io->bus_lower & 0xffff0000) >> 16);
cmdstat |= PCI_COMMAND_IO;
}
/* Enable memory and I/O accesses, enable bus master */
pci_hose_write_config_word(hose, dev, PCI_COMMAND,
cmdstat | PCI_COMMAND_MASTER);
}
void pciauto_postscan_setup_bridge(struct pci_controller *hose,
pci_dev_t dev, int sub_bus)
{
struct pci_region *pci_mem;
struct pci_region *pci_prefetch;
struct pci_region *pci_io;
pci_mem = hose->pci_mem;
pci_prefetch = hose->pci_prefetch;
pci_io = hose->pci_io;
/* Configure bus number registers */
pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS,
sub_bus - hose->first_busno);
if (pci_mem) {
/* Round memory allocator to 1MB boundary */
pciauto_region_align(pci_mem, 0x100000);
pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT,
(pci_mem->bus_lower - 1) >> 16);
}
if (pci_prefetch) {
u16 prefechable_64;
pci_hose_read_config_word(hose, dev,
PCI_PREF_MEMORY_LIMIT,
&prefechable_64);
prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
/* Round memory allocator to 1MB boundary */
pciauto_region_align(pci_prefetch, 0x100000);
pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT,
(pci_prefetch->bus_lower - 1) >> 16);
if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
#ifdef CONFIG_SYS_PCI_64BIT
pci_hose_write_config_dword(hose, dev,
PCI_PREF_LIMIT_UPPER32,
(pci_prefetch->bus_lower - 1) >> 32);
#else
pci_hose_write_config_dword(hose, dev,
PCI_PREF_LIMIT_UPPER32,
0x0);
#endif
}
if (pci_io) {
/* Round I/O allocator to 4KB boundary */
pciauto_region_align(pci_io, 0x1000);
pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT,
((pci_io->bus_lower - 1) & 0x0000f000) >> 8);
pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16,
((pci_io->bus_lower - 1) & 0xffff0000) >> 16);
}
}
/*
* HJF: Changed this to return int. I think this is required
* to get the correct result when scanning bridges
*/
int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
{
struct pci_region *pci_mem;
struct pci_region *pci_prefetch;
struct pci_region *pci_io;
unsigned int sub_bus = PCI_BUS(dev);
unsigned short class;
int n;
pci_mem = hose->pci_mem;
pci_prefetch = hose->pci_prefetch;
pci_io = hose->pci_io;
pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
switch (class) {
case PCI_CLASS_BRIDGE_PCI:
debug("PCI Autoconfig: Found P2P bridge, device %d\n",
PCI_DEV(dev));
pciauto_setup_device(hose, dev, 2, pci_mem,
pci_prefetch, pci_io);
/* Passing in current_busno allows for sibling P2P bridges */
hose->current_busno++;
pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
/*
* need to figure out if this is a subordinate bridge on the bus
* to be able to properly set the pri/sec/sub bridge registers.
*/
n = pci_hose_scan_bus(hose, hose->current_busno);
/* figure out the deepest we've gone for this leg */
sub_bus = max((unsigned int)n, sub_bus);
pciauto_postscan_setup_bridge(hose, dev, sub_bus);
sub_bus = hose->current_busno;
break;
case PCI_CLASS_BRIDGE_CARDBUS:
/*
* just do a minimal setup of the bridge,
* let the OS take care of the rest
*/
pciauto_setup_device(hose, dev, 0, pci_mem,
pci_prefetch, pci_io);
debug("PCI Autoconfig: Found P2CardBus bridge, device %d\n",
PCI_DEV(dev));
hose->current_busno++;
break;
#if defined(CONFIG_PCIAUTO_SKIP_HOST_BRIDGE)
case PCI_CLASS_BRIDGE_OTHER:
debug("PCI Autoconfig: Skipping bridge device %d\n",
PCI_DEV(dev));
break;
#endif
#if defined(CONFIG_ARCH_MPC834X) && !defined(CONFIG_TARGET_VME8349) && \
!defined(CONFIG_TARGET_CADDY2)
case PCI_CLASS_BRIDGE_OTHER:
/*
* The host/PCI bridge 1 seems broken in 8349 - it presents
* itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_
* device claiming resources io/mem/irq.. we only allow for
* the PIMMR window to be allocated (BAR0 - 1MB size)
*/
debug("PCI Autoconfig: Broken bridge found, only minimal config\n");
pciauto_setup_device(hose, dev, 0, hose->pci_mem,
hose->pci_prefetch, hose->pci_io);
break;
#endif
case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */
debug("PCI AutoConfig: Found PowerPC device\n");
default:
pciauto_setup_device(hose, dev, 6, pci_mem,
pci_prefetch, pci_io);
break;
}
return sub_bus;
}