u-boot

History

Fabio Estevam 0d6a41edb5 udoo: Remove cpu type check prior to setup_sata() Inside setup_sata() there is a cpu type check, so there is no need to do this check in the board file. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>		2017-10-31 11:13:56 +01:00
..
neo	env: Rename setenv() to env_set()	2017-08-16 08:22:18 -04:00
Kconfig	mx6: remove SYS_SOC from board Kconfig	2015-09-13 10:37:29 +02:00
MAINTAINERS	MAINTAINERS/mailmap: Update my email address	2016-01-11 11:22:43 -05:00
Makefile	udoo: Switch to SPL support	2015-09-02 15:25:28 +02:00
README	udoo: Add a README file	2016-10-06 09:40:34 +02:00
udoo_spl.c	imx6: drop duplicated bss memset and board_init_r() call	2017-09-18 17:15:28 +02:00
udoo.c	udoo: Remove cpu type check prior to setup_sata()	2017-10-31 11:13:56 +01:00

README

How to use U-Boot on MX6Q/DL Udoo boards
----------------------------------------

- Build U-Boot for MX6Q/DL Udoo boards:

$ make mrproper
$ make udoo_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the board, power it up and U-Boot messages should
come up.