afe3378701
This converts the following to Kconfig: CONFIG_PALMAS_POWER Signed-off-by: Tom Rini <trini@konsulko.com>
296 lines
9.6 KiB
C
296 lines
9.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2013
|
|
* Texas Instruments Incorporated.
|
|
* Sricharan R <r.sricharan@ti.com>
|
|
*
|
|
* Derived from OMAP4 done by:
|
|
* Aneesh V <aneesh@ti.com>
|
|
*
|
|
* TI OMAP5 AND DRA7XX common configuration settings
|
|
*
|
|
* For more details, please see the technical documents listed at
|
|
* http://www.ti.com/product/omap5432
|
|
*/
|
|
|
|
#ifndef __CONFIG_TI_OMAP5_COMMON_H
|
|
#define __CONFIG_TI_OMAP5_COMMON_H
|
|
|
|
/* Use General purpose timer 1 */
|
|
#define CONFIG_SYS_TIMERBASE GPT2_BASE
|
|
|
|
#include <linux/stringify.h>
|
|
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/omap.h>
|
|
|
|
#include <configs/ti_armv7_omap.h>
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_SYS_NS16550_CLK 48000000
|
|
#if !defined(CONFIG_DM_SERIAL)
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
#endif
|
|
|
|
/*
|
|
* Environment setup
|
|
*/
|
|
|
|
#ifndef DFUARGS
|
|
#define DFUARGS
|
|
#endif
|
|
|
|
#include <environment/ti/mmc.h>
|
|
#include <environment/ti/nand.h>
|
|
|
|
#ifndef CONSOLEDEV
|
|
#define CONSOLEDEV "ttyS2"
|
|
#endif
|
|
|
|
#ifndef PARTS_DEFAULT
|
|
/*
|
|
* Default GPT tables for eMMC (Linux and Android). Notes:
|
|
* 1. Keep partitions aligned to erase group size (512 KiB) when possible
|
|
* 2. Keep partitions in sync with DFU_ALT_INFO_EMMC (see dfu.h)
|
|
* 3. Keep 'bootloader' partition (U-Boot proper) start address in sync with
|
|
* CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (see common/spl/Kconfig)
|
|
*/
|
|
#define PARTS_DEFAULT \
|
|
/* Linux partitions */ \
|
|
"uuid_disk=${uuid_gpt_disk};" \
|
|
"name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};" \
|
|
"name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}\0" \
|
|
/* Android partitions */ \
|
|
"partitions_android=" \
|
|
"uuid_disk=${uuid_gpt_disk};" \
|
|
"name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
|
|
"name=bootloader,size=2048K,uuid=${uuid_gpt_bootloader};" \
|
|
"name=uboot-env,start=2432K,size=256K,uuid=${uuid_gpt_reserved};" \
|
|
"name=misc,size=128K,uuid=${uuid_gpt_misc};" \
|
|
"name=boot_a,size=20M,uuid=${uuid_gpt_boot_a};" \
|
|
"name=boot_b,size=20M,uuid=${uuid_gpt_boot_b};" \
|
|
"name=dtbo_a,size=8M,uuid=${uuid_gpt_dtbo_a};" \
|
|
"name=dtbo_b,size=8M,uuid=${uuid_gpt_dtbo_b};" \
|
|
"name=vbmeta_a,size=64K,uuid=${uuid_gpt_vbmeta_a};" \
|
|
"name=vbmeta_b,size=64K,uuid=${uuid_gpt_vbmeta_b};" \
|
|
"name=recovery,size=64M,uuid=${uuid_gpt_recovery};" \
|
|
"name=super,size=2560M,uuid=${uuid_gpt_super};" \
|
|
"name=metadata,size=16M,uuid=${uuid_gpt_metadata};" \
|
|
"name=userdata,size=-,uuid=${uuid_gpt_userdata}"
|
|
#endif /* PARTS_DEFAULT */
|
|
|
|
#if defined(CONFIG_CMD_AVB)
|
|
#define AVB_VERIFY_CHECK "if run avb_verify; then " \
|
|
"echo AVB verification OK.;" \
|
|
"set bootargs $bootargs $avb_bootargs;" \
|
|
"else " \
|
|
"echo AVB verification failed.;" \
|
|
"exit; fi;"
|
|
#define AVB_VERIFY_CMD "avb_verify=avb init 1; avb verify $slot_suffix;\0"
|
|
#else
|
|
#define AVB_VERIFY_CHECK ""
|
|
#define AVB_VERIFY_CMD ""
|
|
#endif
|
|
|
|
#define CONTROL_PARTITION "misc"
|
|
|
|
#if defined(CONFIG_CMD_AB_SELECT)
|
|
#define AB_SELECT_SLOT \
|
|
"if part number mmc 1 " CONTROL_PARTITION " control_part_number; " \
|
|
"then " \
|
|
"echo " CONTROL_PARTITION \
|
|
" partition number:${control_part_number};" \
|
|
"ab_select slot_name mmc ${mmcdev}:${control_part_number};" \
|
|
"else " \
|
|
"echo " CONTROL_PARTITION " partition not found;" \
|
|
"exit;" \
|
|
"fi;" \
|
|
"setenv slot_suffix _${slot_name};"
|
|
#define AB_SELECT_ARGS \
|
|
"setenv bootargs_ab androidboot.slot_suffix=${slot_suffix}; " \
|
|
"echo A/B cmdline addition: ${bootargs_ab};" \
|
|
"setenv bootargs ${bootargs} ${bootargs_ab};"
|
|
#else
|
|
#define AB_SELECT_SLOT ""
|
|
#define AB_SELECT_ARGS ""
|
|
#endif
|
|
|
|
/*
|
|
* Prepares complete device tree blob for current board (for Android boot).
|
|
*
|
|
* Boot image or recovery image should be loaded into $loadaddr prior to running
|
|
* these commands. The logic of these commnads is next:
|
|
*
|
|
* 1. Read correct DTB for current SoC/board from boot image in $loadaddr
|
|
* to $fdtaddr
|
|
* 2. Merge all needed DTBO for current board from 'dtbo' partition into read
|
|
* DTB
|
|
* 3. User should provide $fdtaddr as 3rd argument to 'bootm'
|
|
*/
|
|
#define PREPARE_FDT \
|
|
"echo Preparing FDT...; " \
|
|
"if test $board_name = am57xx_evm_reva3; then " \
|
|
"echo \" Reading DTBO partition...\"; " \
|
|
"part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; " \
|
|
"part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; " \
|
|
"mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; " \
|
|
"echo \" Reading DTB for AM57x EVM RevA3...\"; " \
|
|
"abootimg get dtb --index=0 dtb_start dtb_size; " \
|
|
"cp.b $dtb_start $fdtaddr $dtb_size; " \
|
|
"fdt addr $fdtaddr 0x80000; " \
|
|
"echo \" Applying DTBOs for AM57x EVM RevA3...\"; " \
|
|
"adtimg addr $dtboaddr; " \
|
|
"adtimg get dt --index=0 dtbo0_addr dtbo0_size; " \
|
|
"fdt apply $dtbo0_addr; " \
|
|
"adtimg get dt --index=1 dtbo1_addr dtbo1_size; " \
|
|
"fdt apply $dtbo1_addr; " \
|
|
"elif test $board_name = beagle_x15_revc; then " \
|
|
"echo \" Reading DTB for Beagle X15 RevC...\"; " \
|
|
"abootimg get dtb --index=0 dtb_start dtb_size; " \
|
|
"cp.b $dtb_start $fdtaddr $dtb_size; " \
|
|
"fdt addr $fdtaddr 0x80000; " \
|
|
"else " \
|
|
"echo Error: Android boot is not supported for $board_name; " \
|
|
"exit; " \
|
|
"fi; " \
|
|
|
|
#define DEFAULT_COMMON_BOOT_TI_ARGS \
|
|
"console=" CONSOLEDEV ",115200n8\0" \
|
|
"fdtfile=undefined\0" \
|
|
"finduuid=part uuid mmc 0:2 uuid\0" \
|
|
"usbtty=cdc_acm\0" \
|
|
"vram=16M\0" \
|
|
AVB_VERIFY_CMD \
|
|
"partitions=" PARTS_DEFAULT "\0" \
|
|
"optargs=\0" \
|
|
"dofastboot=0\0" \
|
|
"emmc_android_boot=" \
|
|
"setenv mmcdev 1; " \
|
|
"mmc dev $mmcdev; " \
|
|
"mmc rescan; " \
|
|
AB_SELECT_SLOT \
|
|
"if bcb load " __stringify(CONFIG_FASTBOOT_FLASH_MMC_DEV) " " \
|
|
CONTROL_PARTITION "; then " \
|
|
"setenv ardaddr -; " \
|
|
"if bcb test command = bootonce-bootloader; then " \
|
|
"echo Android: Bootloader boot...; " \
|
|
"bcb clear command; bcb store; " \
|
|
"fastboot 1; " \
|
|
"exit; " \
|
|
"elif bcb test command = boot-recovery; then " \
|
|
"echo Android: Recovery boot...; " \
|
|
"setenv ardaddr $loadaddr;" \
|
|
"setenv apart recovery; " \
|
|
"else " \
|
|
"echo Android: Normal boot...; " \
|
|
"setenv ardaddr $loadaddr; " \
|
|
"setenv apart boot${slot_suffix}; " \
|
|
"fi; " \
|
|
"else " \
|
|
"echo Warning: BCB is corrupted or does not exist; " \
|
|
"echo Android: Normal boot...; " \
|
|
"fi; " \
|
|
"setenv eval_bootargs setenv bootargs $bootargs; " \
|
|
"run eval_bootargs; " \
|
|
"setenv machid fe6; " \
|
|
AVB_VERIFY_CHECK \
|
|
AB_SELECT_ARGS \
|
|
"if part start mmc $mmcdev $apart boot_start; then " \
|
|
"part size mmc $mmcdev $apart boot_size; " \
|
|
"mmc read $loadaddr $boot_start $boot_size; " \
|
|
PREPARE_FDT \
|
|
"bootm $loadaddr $ardaddr $fdtaddr; " \
|
|
"else " \
|
|
"echo $apart partition not found; " \
|
|
"exit; " \
|
|
"fi;\0"
|
|
|
|
#define DEFAULT_FDT_TI_ARGS \
|
|
"findfdt="\
|
|
"if test $board_name = omap5_uevm; then " \
|
|
"setenv fdtfile omap5-uevm.dtb; fi; " \
|
|
"if test $board_name = dra7xx; then " \
|
|
"setenv fdtfile dra7-evm.dtb; fi;" \
|
|
"if test $board_name = dra72x-revc; then " \
|
|
"setenv fdtfile dra72-evm-revc.dtb; fi;" \
|
|
"if test $board_name = dra72x; then " \
|
|
"setenv fdtfile dra72-evm.dtb; fi;" \
|
|
"if test $board_name = dra71x; then " \
|
|
"setenv fdtfile dra71-evm.dtb; fi;" \
|
|
"if test $board_name = dra76x_acd; then " \
|
|
"setenv fdtfile dra76-evm.dtb; fi;" \
|
|
"if test $board_name = beagle_x15; then " \
|
|
"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
|
|
"if test $board_name = beagle_x15_revb1; then " \
|
|
"setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;" \
|
|
"if test $board_name = beagle_x15_revc; then " \
|
|
"setenv fdtfile am57xx-beagle-x15-revc.dtb; fi;" \
|
|
"if test $board_name = am5729_beagleboneai; then " \
|
|
"setenv fdtfile am5729-beagleboneai.dtb; fi;" \
|
|
"if test $board_name = am572x_idk; then " \
|
|
"setenv fdtfile am572x-idk.dtb; fi;" \
|
|
"if test $board_name = am574x_idk; then " \
|
|
"setenv fdtfile am574x-idk.dtb; fi;" \
|
|
"if test $board_name = am57xx_evm; then " \
|
|
"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
|
|
"if test $board_name = am57xx_evm_reva3; then " \
|
|
"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
|
|
"if test $board_name = am571x_idk; then " \
|
|
"setenv fdtfile am571x-idk.dtb; fi;" \
|
|
"if test $fdtfile = undefined; then " \
|
|
"echo WARNING: Could not determine device tree to use; fi; \0"
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 0) \
|
|
func(MMC, mmc, 1) \
|
|
func(PXE, pxe, na) \
|
|
func(DHCP, dhcp, na)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
DEFAULT_LINUX_BOOT_ENV \
|
|
DEFAULT_MMC_TI_ARGS \
|
|
DEFAULT_FIT_TI_ARGS \
|
|
DEFAULT_COMMON_BOOT_TI_ARGS \
|
|
DEFAULT_FDT_TI_ARGS \
|
|
DFUARGS \
|
|
NETARGS \
|
|
NANDARGS \
|
|
BOOTENV
|
|
|
|
/*
|
|
* SPL related defines. The Public RAM memory map the ROM defines the
|
|
* area between 0x40300000 and 0x4031E000 as a download area for OMAP5.
|
|
* On DRA7xx/AM57XX the download area is between 0x40300000 and 0x4037E000.
|
|
* We set CONFIG_SPL_DISPLAY_PRINT to have omap_rev_string() called and
|
|
* print some information.
|
|
*/
|
|
#ifdef CONFIG_TI_SECURE_DEVICE
|
|
/*
|
|
* For memory booting on HS parts, the first 4KB of the internal RAM is
|
|
* reserved for secure world use and the flash loader image is
|
|
* preceded by a secure certificate. The SPL will therefore run in internal
|
|
* RAM from address 0x40301350 (0x40300000+0x1000(reserved)+0x350(cert)).
|
|
*/
|
|
#define TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ 0x1000
|
|
/* If no specific start address is specified then the secure EMIF
|
|
* region will be placed at the end of the DDR space. In order to prevent
|
|
* the main u-boot relocation from clobbering that memory and causing a
|
|
* firewall violation, we tell u-boot that memory is protected RAM (PRAM)
|
|
*/
|
|
#if (CONFIG_TI_SECURE_EMIF_REGION_START == 0)
|
|
#define CONFIG_PRAM (CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE) >> 10
|
|
#endif
|
|
#else
|
|
/*
|
|
* For all booting on GP parts, the flash loader image is
|
|
* downloaded into internal RAM at address 0x40300000.
|
|
*/
|
|
#endif
|
|
|
|
#endif /* __CONFIG_TI_OMAP5_COMMON_H */
|