u-boot/configs/ge_bx50v3_defconfig
Anatolij Gustschin 0b09f7b150 imx6: ge_bx50v3: convert to DM_VIDEO
Enable DM_VIDEO in defconfig.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:09 +02:00

67 lines
1.5 KiB
Plaintext

CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x17800000
CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50
CONFIG_SYS_VPD_EEPROM_I2C_BUS=4
CONFIG_SYS_VPD_EEPROM_SIZE=1024
CONFIG_TARGET_GE_BX50V3=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_FIT=y
CONFIG_BOOTDELAY=1
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
CONFIG_CMD_SF=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_DOS_PARTITION=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_EXT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=10
CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
CONFIG_FSL_ESDHC=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_E1000=y
CONFIG_CMD_E1000=y
CONFIG_MII=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_IMX_WATCHDOG=y
CONFIG_OF_LIBFDT=y
# CONFIG_EFI_LOADER is not set
CONFIG_DM=y
CONFIG_CMD_DM=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx6q-bx50v3"
CONFIG_DM_MMC=y
CONFIG_BLK=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_DM_GPIO=y
CONFIG_DM_SPI=y
CONFIG_DM_SPI_FLASH=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DM_VIDEO=y
CONFIG_VIDEO_IPUV3=y