cd93d625fd
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
448 lines
9.8 KiB
C
448 lines
9.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2015
|
|
* Cristian Birsan <cristian.birsan@microchip.com>
|
|
* Purna Chandra Mandal <purna.mandal@microchip.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <fdt_support.h>
|
|
#include <flash.h>
|
|
#include <init.h>
|
|
#include <irq_func.h>
|
|
#include <linux/bitops.h>
|
|
#include <mach/pic32.h>
|
|
#include <wait_bit.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* NVM Controller registers */
|
|
struct pic32_reg_nvm {
|
|
struct pic32_reg_atomic ctrl;
|
|
struct pic32_reg_atomic key;
|
|
struct pic32_reg_atomic addr;
|
|
struct pic32_reg_atomic data;
|
|
};
|
|
|
|
/* NVM operations */
|
|
#define NVMOP_NOP 0
|
|
#define NVMOP_WORD_WRITE 1
|
|
#define NVMOP_PAGE_ERASE 4
|
|
|
|
/* NVM control bits */
|
|
#define NVM_WR BIT(15)
|
|
#define NVM_WREN BIT(14)
|
|
#define NVM_WRERR BIT(13)
|
|
#define NVM_LVDERR BIT(12)
|
|
|
|
/* NVM programming unlock register */
|
|
#define LOCK_KEY 0x0
|
|
#define UNLOCK_KEY1 0xaa996655
|
|
#define UNLOCK_KEY2 0x556699aa
|
|
|
|
/*
|
|
* PIC32 flash banks consist of number of pages, each page
|
|
* into number of rows and rows into number of words.
|
|
* Here we will maintain page information instead of sector.
|
|
*/
|
|
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
|
|
static struct pic32_reg_nvm *nvm_regs_p;
|
|
|
|
static inline void flash_initiate_operation(u32 nvmop)
|
|
{
|
|
/* set operation */
|
|
writel(nvmop, &nvm_regs_p->ctrl.raw);
|
|
|
|
/* enable flash write */
|
|
writel(NVM_WREN, &nvm_regs_p->ctrl.set);
|
|
|
|
/* unlock sequence */
|
|
writel(LOCK_KEY, &nvm_regs_p->key.raw);
|
|
writel(UNLOCK_KEY1, &nvm_regs_p->key.raw);
|
|
writel(UNLOCK_KEY2, &nvm_regs_p->key.raw);
|
|
|
|
/* initiate operation */
|
|
writel(NVM_WR, &nvm_regs_p->ctrl.set);
|
|
}
|
|
|
|
static int flash_wait_till_busy(const char *func, ulong timeout)
|
|
{
|
|
int ret = wait_for_bit_le32(&nvm_regs_p->ctrl.raw,
|
|
NVM_WR, false, timeout, false);
|
|
|
|
return ret ? ERR_TIMEOUT : ERR_OK;
|
|
}
|
|
|
|
static inline int flash_complete_operation(void)
|
|
{
|
|
u32 tmp;
|
|
|
|
tmp = readl(&nvm_regs_p->ctrl.raw);
|
|
if (tmp & NVM_WRERR) {
|
|
printf("Error in Block Erase - Lock Bit may be set!\n");
|
|
flash_initiate_operation(NVMOP_NOP);
|
|
return ERR_PROTECTED;
|
|
}
|
|
|
|
if (tmp & NVM_LVDERR) {
|
|
printf("Error in Block Erase - low-vol detected!\n");
|
|
flash_initiate_operation(NVMOP_NOP);
|
|
return ERR_NOT_ERASED;
|
|
}
|
|
|
|
/* disable flash write or erase operation */
|
|
writel(NVM_WREN, &nvm_regs_p->ctrl.clr);
|
|
|
|
return ERR_OK;
|
|
}
|
|
|
|
/*
|
|
* Erase flash sectors, returns:
|
|
* ERR_OK - OK
|
|
* ERR_INVAL - invalid sector arguments
|
|
* ERR_TIMEOUT - write timeout
|
|
* ERR_NOT_ERASED - Flash not erased
|
|
* ERR_UNKNOWN_FLASH_VENDOR - incorrect flash
|
|
*/
|
|
int flash_erase(flash_info_t *info, int s_first, int s_last)
|
|
{
|
|
ulong sect_start, sect_end, flags;
|
|
int prot, sect;
|
|
int rc;
|
|
|
|
if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_MCHP) {
|
|
printf("Can't erase unknown flash type %08lx - aborted\n",
|
|
info->flash_id);
|
|
return ERR_UNKNOWN_FLASH_VENDOR;
|
|
}
|
|
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
printf("- no sectors to erase\n");
|
|
return ERR_INVAL;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect = s_first; sect <= s_last; ++sect) {
|
|
if (info->protect[sect])
|
|
prot++;
|
|
}
|
|
|
|
if (prot)
|
|
printf("- Warning: %d protected sectors will not be erased!\n",
|
|
prot);
|
|
else
|
|
printf("\n");
|
|
|
|
/* erase on unprotected sectors */
|
|
for (sect = s_first; sect <= s_last; sect++) {
|
|
if (info->protect[sect])
|
|
continue;
|
|
|
|
/* disable interrupts */
|
|
flags = disable_interrupts();
|
|
|
|
/* write destination page address (physical) */
|
|
sect_start = CPHYSADDR(info->start[sect]);
|
|
writel(sect_start, &nvm_regs_p->addr.raw);
|
|
|
|
/* page erase */
|
|
flash_initiate_operation(NVMOP_PAGE_ERASE);
|
|
|
|
/* wait */
|
|
rc = flash_wait_till_busy(__func__,
|
|
CONFIG_SYS_FLASH_ERASE_TOUT);
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flags)
|
|
enable_interrupts();
|
|
|
|
if (rc != ERR_OK)
|
|
return rc;
|
|
|
|
rc = flash_complete_operation();
|
|
if (rc != ERR_OK)
|
|
return rc;
|
|
|
|
/*
|
|
* flash content is updated but cache might contain stale
|
|
* data, so invalidate dcache.
|
|
*/
|
|
sect_end = info->start[sect] + info->size / info->sector_count;
|
|
invalidate_dcache_range(info->start[sect], sect_end);
|
|
}
|
|
|
|
printf(" done\n");
|
|
return ERR_OK;
|
|
}
|
|
|
|
int page_erase(flash_info_t *info, int sect)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* Write a word to flash */
|
|
static int write_word(flash_info_t *info, ulong dest, ulong word)
|
|
{
|
|
ulong flags;
|
|
int rc;
|
|
|
|
/* read flash to check if it is sufficiently erased */
|
|
if ((readl((void __iomem *)dest) & word) != word) {
|
|
printf("Error, Flash not erased!\n");
|
|
return ERR_NOT_ERASED;
|
|
}
|
|
|
|
/* disable interrupts */
|
|
flags = disable_interrupts();
|
|
|
|
/* update destination page address (physical) */
|
|
writel(CPHYSADDR(dest), &nvm_regs_p->addr.raw);
|
|
writel(word, &nvm_regs_p->data.raw);
|
|
|
|
/* word write */
|
|
flash_initiate_operation(NVMOP_WORD_WRITE);
|
|
|
|
/* wait for operation to complete */
|
|
rc = flash_wait_till_busy(__func__, CONFIG_SYS_FLASH_WRITE_TOUT);
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flags)
|
|
enable_interrupts();
|
|
|
|
if (rc != ERR_OK)
|
|
return rc;
|
|
|
|
return flash_complete_operation();
|
|
}
|
|
|
|
/*
|
|
* Copy memory to flash, returns:
|
|
* ERR_OK - OK
|
|
* ERR_TIMEOUT - write timeout
|
|
* ERR_NOT_ERASED - Flash not erased
|
|
*/
|
|
int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
|
|
{
|
|
ulong dst, tmp_le, len = cnt;
|
|
int i, l, rc;
|
|
uchar *cp;
|
|
|
|
/* get lower word aligned address */
|
|
dst = (addr & ~3);
|
|
|
|
/* handle unaligned start bytes */
|
|
l = addr - dst;
|
|
if (l != 0) {
|
|
tmp_le = 0;
|
|
for (i = 0, cp = (uchar *)dst; i < l; ++i, ++cp)
|
|
tmp_le |= *cp << (i * 8);
|
|
|
|
for (; (i < 4) && (cnt > 0); ++i, ++src, --cnt, ++cp)
|
|
tmp_le |= *src << (i * 8);
|
|
|
|
for (; (cnt == 0) && (i < 4); ++i, ++cp)
|
|
tmp_le |= *cp << (i * 8);
|
|
|
|
rc = write_word(info, dst, tmp_le);
|
|
if (rc)
|
|
goto out;
|
|
|
|
dst += 4;
|
|
}
|
|
|
|
/* handle word aligned part */
|
|
while (cnt >= 4) {
|
|
tmp_le = src[0] | src[1] << 8 | src[2] << 16 | src[3] << 24;
|
|
rc = write_word(info, dst, tmp_le);
|
|
if (rc)
|
|
goto out;
|
|
src += 4;
|
|
dst += 4;
|
|
cnt -= 4;
|
|
}
|
|
|
|
if (cnt == 0) {
|
|
rc = ERR_OK;
|
|
goto out;
|
|
}
|
|
|
|
/* handle unaligned tail bytes */
|
|
tmp_le = 0;
|
|
for (i = 0, cp = (uchar *)dst; (i < 4) && (cnt > 0); ++i, ++cp) {
|
|
tmp_le |= *src++ << (i * 8);
|
|
--cnt;
|
|
}
|
|
|
|
for (; i < 4; ++i, ++cp)
|
|
tmp_le |= *cp << (i * 8);
|
|
|
|
rc = write_word(info, dst, tmp_le);
|
|
out:
|
|
/*
|
|
* flash content updated by nvm controller but CPU cache might
|
|
* have stale data, so invalidate dcache.
|
|
*/
|
|
invalidate_dcache_range(addr, addr + len);
|
|
|
|
printf(" done\n");
|
|
return rc;
|
|
}
|
|
|
|
void flash_print_info(flash_info_t *info)
|
|
{
|
|
int i;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf("missing or unknown FLASH type\n");
|
|
return;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case FLASH_MAN_MCHP:
|
|
printf("Microchip Technology ");
|
|
break;
|
|
default:
|
|
printf("Unknown Vendor ");
|
|
break;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_MCHP100T:
|
|
printf("Internal (8 Mbit, 64 x 16k)\n");
|
|
break;
|
|
default:
|
|
printf("Unknown Chip Type\n");
|
|
break;
|
|
}
|
|
|
|
printf(" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20, info->sector_count);
|
|
|
|
printf(" Sector Start Addresses:");
|
|
for (i = 0; i < info->sector_count; ++i) {
|
|
if ((i % 5) == 0)
|
|
printf("\n ");
|
|
|
|
printf(" %08lX%s", info->start[i],
|
|
info->protect[i] ? " (RO)" : " ");
|
|
}
|
|
printf("\n");
|
|
}
|
|
|
|
unsigned long flash_init(void)
|
|
{
|
|
unsigned long size = 0;
|
|
struct udevice *dev;
|
|
int bank;
|
|
|
|
/* probe every MTD device */
|
|
for (uclass_first_device(UCLASS_MTD, &dev); dev;
|
|
uclass_next_device(&dev)) {
|
|
/* nop */
|
|
}
|
|
|
|
/* calc total flash size */
|
|
for (bank = 0; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank)
|
|
size += flash_info[bank].size;
|
|
|
|
return size;
|
|
}
|
|
|
|
static void pic32_flash_bank_init(flash_info_t *info,
|
|
ulong base, ulong size)
|
|
{
|
|
ulong sect_size;
|
|
int sect;
|
|
|
|
/* device & manufacturer code */
|
|
info->flash_id = FLASH_MAN_MCHP | FLASH_MCHP100T;
|
|
info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
|
|
info->size = size;
|
|
|
|
/* update sector (i.e page) info */
|
|
sect_size = info->size / info->sector_count;
|
|
for (sect = 0; sect < info->sector_count; sect++) {
|
|
info->start[sect] = base;
|
|
/* protect each sector by default */
|
|
info->protect[sect] = 1;
|
|
base += sect_size;
|
|
}
|
|
}
|
|
|
|
static int pic32_flash_probe(struct udevice *dev)
|
|
{
|
|
void *blob = (void *)gd->fdt_blob;
|
|
int node = dev_of_offset(dev);
|
|
const char *list, *end;
|
|
const fdt32_t *cell;
|
|
unsigned long addr, size;
|
|
int parent, addrc, sizec;
|
|
flash_info_t *info;
|
|
int len, idx;
|
|
|
|
/*
|
|
* decode regs. there are multiple reg tuples, and they need to
|
|
* match with reg-names.
|
|
*/
|
|
parent = fdt_parent_offset(blob, node);
|
|
fdt_support_default_count_cells(blob, parent, &addrc, &sizec);
|
|
list = fdt_getprop(blob, node, "reg-names", &len);
|
|
if (!list)
|
|
return -ENOENT;
|
|
|
|
end = list + len;
|
|
cell = fdt_getprop(blob, node, "reg", &len);
|
|
if (!cell)
|
|
return -ENOENT;
|
|
|
|
for (idx = 0, info = &flash_info[0]; list < end;) {
|
|
addr = fdt_translate_address((void *)blob, node, cell + idx);
|
|
size = fdt_addr_to_cpu(cell[idx + addrc]);
|
|
len = strlen(list);
|
|
if (!strncmp(list, "nvm", len)) {
|
|
/* NVM controller */
|
|
nvm_regs_p = ioremap(addr, size);
|
|
} else if (!strncmp(list, "bank", 4)) {
|
|
/* Flash bank: use kseg0 cached address */
|
|
pic32_flash_bank_init(info, CKSEG0ADDR(addr), size);
|
|
info++;
|
|
}
|
|
idx += addrc + sizec;
|
|
list += len + 1;
|
|
}
|
|
|
|
/* disable flash write/erase operations */
|
|
writel(NVM_WREN, &nvm_regs_p->ctrl.clr);
|
|
|
|
#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
|
|
/* monitor protection ON by default */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CONFIG_SYS_MONITOR_BASE,
|
|
CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
|
|
&flash_info[0]);
|
|
#endif
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_FLASH
|
|
/* ENV protection ON by default */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR,
|
|
CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
|
|
&flash_info[0]);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id pic32_flash_ids[] = {
|
|
{ .compatible = "microchip,pic32mzda-flash" },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(pic32_flash) = {
|
|
.name = "pic32_flash",
|
|
.id = UCLASS_MTD,
|
|
.of_match = pic32_flash_ids,
|
|
.probe = pic32_flash_probe,
|
|
};
|