446266b024
Literally adhering to the docs gave this wrong output:
U-Boot> setenv fdtaddr 0x87f00000
U-Boot> fdtaddr $fdtaddr
Unknown command 'fdtaddr' - try 'help'
Fixes: d80162cfc5 ("doc: Document how to apply fdt overlays")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
135 lines
3.0 KiB
ReStructuredText
135 lines
3.0 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
.. Copyright (c) 2017, Pantelis Antoniou <pantelis.antoniou@konsulko.com>
|
|
|
|
Device Tree Overlays
|
|
====================
|
|
|
|
Overlay Syntax
|
|
--------------
|
|
|
|
Device-tree overlays require a slightly different syntax compared to traditional
|
|
device-trees. Please refer to dt-object-internal.txt in the device-tree compiler
|
|
sources for information regarding the internal format of overlays:
|
|
https://git.kernel.org/pub/scm/utils/dtc/dtc.git/tree/Documentation/dt-object-internal.txt
|
|
|
|
Building Overlays
|
|
-----------------
|
|
|
|
In a nutshell overlays provides a means to manipulate a symbol a previous
|
|
device-tree or device-tree overlay has defined. It requires both the base
|
|
device-tree and all the overlays to be compiled with the *-@* command line
|
|
switch of the device-tree compiler so that symbol information is included.
|
|
|
|
Note
|
|
Support for *-@* option can only be found in dtc version 1.4.4 or newer.
|
|
Only version 4.14 or higher of the Linux kernel includes a built in version
|
|
of dtc that meets this requirement.
|
|
|
|
Building a binary device-tree overlay follows the same process as building a
|
|
traditional binary device-tree. For example:
|
|
|
|
**base.dts**
|
|
|
|
::
|
|
|
|
/dts-v1/;
|
|
/ {
|
|
foo: foonode {
|
|
foo-property;
|
|
};
|
|
};
|
|
|
|
.. code-block:: console
|
|
|
|
$ dtc -@ -I dts -O dtb -o base.dtb base.dts
|
|
|
|
**overlay.dts**
|
|
|
|
::
|
|
|
|
/dts-v1/;
|
|
/plugin/;
|
|
/ {
|
|
fragment@1 {
|
|
target = <&foo>;
|
|
__overlay__ {
|
|
overlay-1-property;
|
|
bar: barnode {
|
|
bar-property;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
.. code-block:: console
|
|
|
|
$ dtc -@ -I dts -O dtb -o overlay.dtbo overlay.dts
|
|
|
|
Ways to Utilize Overlays in U-Boot
|
|
----------------------------------
|
|
|
|
There are two ways to apply overlays in U-Boot.
|
|
|
|
* Include and define overlays within a FIT image and have overlays
|
|
automatically applied.
|
|
|
|
* Manually load and apply overlays
|
|
|
|
The remainder of this document will discuss using overlays via the manual
|
|
approach. For information on using overlays as part of a FIT image please see:
|
|
doc/uImage.FIT/overlay-fdt-boot.txt
|
|
|
|
Manually Loading and Applying Overlays
|
|
--------------------------------------
|
|
|
|
1. Figure out where to place both the base device tree blob and the
|
|
overlay. Make sure you have enough space to grow the base tree without
|
|
overlapping anything.
|
|
|
|
::
|
|
|
|
=> setenv fdtaddr 0x87f00000
|
|
=> setenv fdtovaddr 0x87fc0000
|
|
|
|
2. Load the base binary device-tree and the binary device-tree overlay.
|
|
|
|
::
|
|
|
|
=> load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/base.dtb
|
|
=> load ${devtype} ${bootpart} ${fdtovaddr} ${bootdir}/overlay.dtbo
|
|
|
|
3. Set the base binary device-tree as the working fdt tree.
|
|
|
|
::
|
|
|
|
=> fdt addr $fdtaddr
|
|
|
|
4. Grow it enough so it can encompass all applied overlays
|
|
|
|
::
|
|
|
|
=> fdt resize 8192
|
|
|
|
5. You are now ready to apply the overlay.
|
|
|
|
::
|
|
|
|
=> fdt apply $fdtovaddr
|
|
|
|
6. Boot system like you would do with a traditional dtb.
|
|
|
|
For bootm:
|
|
|
|
::
|
|
|
|
=> bootm ${kerneladdr} - ${fdtaddr}
|
|
|
|
For bootz:
|
|
|
|
::
|
|
|
|
=> bootz ${kerneladdr} - ${fdtaddr}
|
|
|
|
Please note that in case of an error, both the base and overlays are going
|
|
to be invalidated, so keep copies to avoid reloading.
|