01c541e0e6
The order of members in struct hws_topology_map is cas_wl, cas_l. The comments in the original db-88f6820-gp.c had this wrong and have been copied to other Armada-385 based boards. Practically this hasn't made a difference since all these boards set both cas_wl and cas_l to 0 (autodetect) but if there were ever a board that did need to set these explicitly they would run into unexpected issued. Update the comments to reflect the correct order of structure members. Reported-by: Tobi Wulff <tobi.wulff@alliedtelesis.co.nz> Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de> |
||
|---|---|---|
| .. | ||
| db-88f6820-gp.c | ||
| kwbimage.cfg | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Update from original Marvell U-Boot to mainline U-Boot: ------------------------------------------------------- The resulting image including the SPL binary with the full DDR setup is "u-boot-spl.kwb". To update the SPI NOR flash, please use the following command: => sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-spl.kwb;\ sf update 2000000 0 60000 Note that the original Marvell U-Boot seems to have problems with the "sf update" command. This does not work reliable. So here this command should be used: => sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-spl.kwb;\ sf erase 0 60000;sf write 2000000 0 60000