u-boot/board/zyxel/nsa310s/nsa310s.h
Gerald Kerma f1df81c400 arm: kirkwood: add ZyXEL NSA310S device
This patch add ZyXEL NSA310S 1-Bay Media Server

The ZyXEL NSA310S device is a Kirkwood based NAS:

- SoC: Marvell 88F6702 1000Mhz
- SDRAM memory: 256MB DDR2 400Mhz
- Gigabit ethernet: PHY Marvell 88E1318
- Flash memory: 128MB
- 1 Power button
- 1 Power LED (blue)
- 4 Status LED (green)
- 1 Copy/Sync button
- 1 Reset button
- 1 SATA II port
- 2 USB 2.0 ports (front and back)
- Smart fan

Signed-off-by: Gerald Kerma <dreagle@doukki.net>
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
2015-11-29 22:16:14 +01:00

48 lines
1.1 KiB
C

/*
* Copyright (C) 2015
* Gerald Kerma <dreagle@doukki.net>
* Tony Dinh <mibodhi@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __NSA310S_H
#define __NSA310S_H
/* low GPIO's */
#define HDD1_GREEN_LED (1 << 16)
#define HDD1_RED_LED (1 << 13)
#define USB_GREEN_LED (1 << 15)
#define USB_POWER (1 << 21)
#define SYS_GREEN_LED (1 << 28)
#define SYS_ORANGE_LED (1 << 29)
#define COPY_GREEN_LED (1 << 22)
#define COPY_RED_LED (1 << 23)
#define PIN_USB_GREEN_LED 15
#define PIN_USB_POWER 21
#define NSA310S_OE_LOW (~(0))
#define NSA310S_VAL_LOW (SYS_GREEN_LED | USB_POWER)
/* high GPIO's */
#define HDD2_GREEN_LED (1 << 2)
#define HDD2_POWER (1 << 1)
#define NSA310S_OE_HIGH (~(0))
#define NSA310S_VAL_HIGH (HDD2_POWER)
/* PHY related */
#define MV88E1318_PGADR_REG 22
#define MV88E1318_MAC_CTRL_PG 2
#define MV88E1318_MAC_CTRL_REG 21
#define MV88E1318_RGMII_TX_CTRL (1 << 4)
#define MV88E1318_RGMII_RX_CTRL (1 << 5)
#define MV88E1318_LED_PG 3
#define MV88E1318_LED_POL_REG 17
#define MV88E1318_LED2_4 (1 << 4)
#define MV88E1318_LED2_5 (1 << 5)
#endif /* __NSA310S_H */