28fff3fa1c
The u-boot-spl.bin pad with ddr firmware conflicts with the CONFIG_MALLOC_F_ADDR area, the ddr firmware will be overwritten by malloc in SPL stage and cause ddr initialization not able to finish. So update the related addresses to fix the issue. Reported-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
161 lines
4.7 KiB
C
161 lines
4.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2019 NXP
|
|
*/
|
|
|
|
#ifndef __IMX8MP_EVK_H
|
|
#define __IMX8MP_EVK_H
|
|
|
|
#include <linux/sizes.h>
|
|
#include <linux/stringify.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#ifdef CONFIG_SECURE_BOOT
|
|
#define CONFIG_CSF_SIZE 0x2000 /* 8K region */
|
|
#endif
|
|
|
|
#define CONFIG_SPL_MAX_SIZE (152 * 1024)
|
|
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
|
|
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
|
|
#define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
|
|
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
|
|
#define CONFIG_SPL_STACK 0x960000
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x0098FC00
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x400 /* 1 KB */
|
|
#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
|
|
#define CONFIG_SYS_ICACHE_OFF
|
|
#define CONFIG_SYS_DCACHE_OFF
|
|
|
|
#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
|
|
|
|
#undef CONFIG_DM_MMC
|
|
#undef CONFIG_DM_PMIC
|
|
#undef CONFIG_DM_PMIC_PFUZE100
|
|
|
|
#define CONFIG_POWER
|
|
#define CONFIG_POWER_I2C
|
|
#define CONFIG_POWER_PCA9450
|
|
|
|
#undef CONFIG_DM_I2C
|
|
#define CONFIG_SYS_I2C
|
|
|
|
#endif
|
|
|
|
/* Initial environment variables */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"script=boot.scr\0" \
|
|
"image=Image\0" \
|
|
"console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200\0" \
|
|
"fdt_addr=0x43000000\0" \
|
|
"fdt_high=0xffffffffffffffff\0" \
|
|
"boot_fdt=try\0" \
|
|
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
|
|
"initrd_addr=0x43800000\0" \
|
|
"initrd_high=0xffffffffffffffff\0" \
|
|
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
|
|
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
|
|
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
|
|
"mmcautodetect=yes\0" \
|
|
"mmcargs=setenv bootargs ${jh_clk} console=${console} root=${mmcroot}\0 " \
|
|
"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; " \
|
|
"source\0" \
|
|
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
|
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run mmcargs; " \
|
|
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
|
"if run loadfdt; then " \
|
|
"booti ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"else " \
|
|
"echo wait for boot; " \
|
|
"fi;\0" \
|
|
"netargs=setenv bootargs ${jh_clk} console=${console} " \
|
|
"root=/dev/nfs " \
|
|
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
|
|
"netboot=echo Booting from net ...; " \
|
|
"run netargs; " \
|
|
"if test ${ip_dyn} = yes; then " \
|
|
"setenv get_cmd dhcp; " \
|
|
"else " \
|
|
"setenv get_cmd tftp; " \
|
|
"fi; " \
|
|
"${get_cmd} ${loadaddr} ${image}; " \
|
|
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
|
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
|
|
"booti ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"else " \
|
|
"booti; " \
|
|
"fi;\0"
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
|
"if run loadbootscript; then " \
|
|
"run bootscript; " \
|
|
"else " \
|
|
"if run loadimage; then " \
|
|
"run mmcboot; " \
|
|
"else run netboot; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"else booti ${loadaddr} - ${fdt_addr}; fi"
|
|
|
|
/* Link Definitions */
|
|
#define CONFIG_LOADADDR 0x40480000
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
|
|
#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN SZ_32M
|
|
|
|
/* Totally 6GB DDR */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x40000000
|
|
#define PHYS_SDRAM 0x40000000
|
|
#define PHYS_SDRAM_SIZE 0xC0000000 /* 3 GB */
|
|
#define PHYS_SDRAM_2 0x100000000
|
|
#define PHYS_SDRAM_2_SIZE 0xC0000000 /* 3 GB */
|
|
|
|
#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
|
|
|
|
/* Monitor Command Prompt */
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
#define CONFIG_SYS_CBSIZE 2048
|
|
#define CONFIG_SYS_MAXARGS 64
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
|
|
#define CONFIG_FSL_USDHC
|
|
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
|
|
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
|
|
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
|
|
#endif
|