9b911bed78
Intel Bayley Bay board is a BayTrail based board. Add this board with existing baytrail fsp support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
62 lines
2.0 KiB
Plaintext
62 lines
2.0 KiB
Plaintext
#
|
|
# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
|
|
#
|
|
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
|
|
if VENDOR_INTEL
|
|
|
|
choice
|
|
prompt "Mainboard model"
|
|
optional
|
|
|
|
config TARGET_BAYLEYBAY
|
|
bool "Bayley Bay"
|
|
help
|
|
This is the Intel Bayley Bay Customer Reference Board. It contains an
|
|
Intel quad-core Atom Processor E3800 with dual-channel DDR3L SODIMM
|
|
4GB memory, HDMI/DP/VGA display, HD audio, SATA, USB2, USB3, SD, eMMC,
|
|
PCIe and some other sensor interfaces.
|
|
|
|
config TARGET_CROWNBAY
|
|
bool "Crown Bay"
|
|
help
|
|
This is the Intel Crown Bay Customer Reference Board. It contains
|
|
the Intel Atom Processor E6xx populated on the COM Express module
|
|
with 1GB DDR2 soldered down memory and a carrier board with the
|
|
Intel Platform Controller Hub EG20T, other system components and
|
|
peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.
|
|
|
|
config TARGET_GALILEO
|
|
bool "Galileo"
|
|
help
|
|
This is the Intel Galileo board, which is the first in a family of
|
|
Arduino-certified development and prototyping boards based on Intel
|
|
architecture. It includes an Intel Quark SoC X1000 processor, a 32-bit
|
|
single-core, single-thread, Intel Pentium processor instrunction set
|
|
architecture (ISA) compatible, operating at speeds up to 400Mhz,
|
|
along with 256MB DDR3 memory. It supports a wide range of industry
|
|
standard I/O interfaces, including a full-sized mini-PCIe slot,
|
|
one 100Mb Ethernet port, a microSD card slot, a USB host port and
|
|
a USB client port.
|
|
|
|
config TARGET_MINNOWMAX
|
|
bool "Minnowboard MAX"
|
|
help
|
|
This is the Intel Minnowboard MAX. It contains an Atom E3800
|
|
processor in a small form factor with Ethernet, micro-SD, USB 2,
|
|
USB 3, SATA, serial console, some GPIOs and HDMI 1.3 video out.
|
|
It requires some binary blobs - see README.x86 for details.
|
|
|
|
Note that PCIE_ECAM_BASE is set up by the FSP so the value used
|
|
by U-Boot matches that value.
|
|
|
|
endchoice
|
|
|
|
source "board/intel/bayleybay/Kconfig"
|
|
source "board/intel/crownbay/Kconfig"
|
|
source "board/intel/galileo/Kconfig"
|
|
source "board/intel/minnowmax/Kconfig"
|
|
|
|
endif
|