08574ed339
This converts the following to Kconfig: CONFIG_SYS_MONITOR_LEN To do this, we set a default of 0 for everyone because there are a number of cases where we define CONFIG_SYS_MONITOR_LEN but the only impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE, so we must continue to allow all boards to set this value. Update the SPL code to use 200 KB as the default raw U-Boot size directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
94 lines
2.6 KiB
Plaintext
94 lines
2.6 KiB
Plaintext
CONFIG_ARM=y
|
|
CONFIG_SKIP_LOWLEVEL_INIT=y
|
|
CONFIG_SYS_ICACHE_OFF=y
|
|
CONFIG_SYS_DCACHE_OFF=y
|
|
CONFIG_ARCH_CPU_INIT=y
|
|
CONFIG_ARCH_LPC32XX=y
|
|
CONFIG_TEXT_BASE=0x83F00000
|
|
CONFIG_SYS_MALLOC_LEN=0x100000
|
|
CONFIG_SYS_MALLOC_F_LEN=0x400
|
|
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
|
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
|
CONFIG_NR_DRAM_BANKS=2
|
|
CONFIG_ENV_SIZE=0x20000
|
|
CONFIG_ENV_OFFSET=0xA0000
|
|
CONFIG_SPL_TEXT_BASE=0x00000000
|
|
CONFIG_SPL_SERIAL=y
|
|
CONFIG_SPL=y
|
|
CONFIG_SYS_LOAD_ADDR=0x80008000
|
|
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
|
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f20
|
|
CONFIG_SYS_MONITOR_LEN=393216
|
|
CONFIG_BOOTDELAY=1
|
|
CONFIG_USE_BOOTARGS=y
|
|
CONFIG_BOOTARGS="console=ttyS0,115200n8"
|
|
CONFIG_USE_BOOTCOMMAND=y
|
|
CONFIG_BOOTCOMMAND="dhcp; tftp ${loadaddr} ${serverip}:${tftpdir}/${bootfile}; tftp ${dtbaddr} ${serverip}:${tftpdir}/devkit3250.dtb; setenv nfsargs ip=dhcp root=/dev/nfs nfsroot=${serverip}:${nfsroot},tcp; setenv bootargs ${bootargs} ${nfsargs} ${userargs}; bootm ${loadaddr} - ${dtbaddr}"
|
|
# CONFIG_DISPLAY_BOARDINFO is not set
|
|
CONFIG_BOARD_EARLY_INIT_F=y
|
|
CONFIG_SPL_MAX_SIZE=0x20000
|
|
CONFIG_SPL_NO_BSS_LIMIT=y
|
|
CONFIG_SPL_BOARD_INIT=y
|
|
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
|
|
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
|
|
CONFIG_SPL_STACK=0xfff8
|
|
CONFIG_SPL_NAND_SUPPORT=y
|
|
CONFIG_SPL_NAND_RAW_ONLY=y
|
|
CONFIG_SPL_NAND_DRIVERS=y
|
|
CONFIG_SPL_NAND_ECC=y
|
|
CONFIG_SPL_NAND_SOFTECC=y
|
|
CONFIG_SPL_NAND_SIMPLE=y
|
|
CONFIG_CMD_IMLS=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_NAND=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_DHCP=y
|
|
CONFIG_SYS_DISABLE_AUTOLOAD=y
|
|
CONFIG_CMD_MII=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_CMD_JFFS2=y
|
|
CONFIG_ENV_IS_IN_NAND=y
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_USE_BOOTFILE=y
|
|
CONFIG_BOOTFILE="uImage"
|
|
CONFIG_VERSION_VARIABLE=y
|
|
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
|
|
CONFIG_DMA_LPC32XX=y
|
|
CONFIG_LPC32XX_GPIO=y
|
|
CONFIG_SYS_I2C_LEGACY=y
|
|
CONFIG_SPL_SYS_I2C_LEGACY=y
|
|
CONFIG_SYS_I2C_LPC32XX=y
|
|
# CONFIG_MMC is not set
|
|
CONFIG_MTD=y
|
|
CONFIG_MTD_NOR_FLASH=y
|
|
CONFIG_FLASH_CFI_DRIVER=y
|
|
CONFIG_SYS_FLASH_PROTECTION=y
|
|
CONFIG_SYS_FLASH_CFI=y
|
|
CONFIG_SYS_MAX_FLASH_SECT=71
|
|
CONFIG_MTD_RAW_NAND=y
|
|
CONFIG_SYS_NAND_USE_FLASH_BBT=y
|
|
CONFIG_NAND_LPC32XX_SLC=y
|
|
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
|
|
CONFIG_SYS_NAND_PAGE_COUNT=0x40
|
|
CONFIG_SYS_NAND_PAGE_SIZE=0x800
|
|
CONFIG_SYS_NAND_OOBSIZE=0x40
|
|
# CONFIG_SYS_NAND_5_ADDR_CYCLE is not set
|
|
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
|
|
CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000
|
|
CONFIG_PHYLIB=y
|
|
CONFIG_PHY_ADDR_ENABLE=y
|
|
CONFIG_PHY_ADDR=31
|
|
CONFIG_PHY_SMSC=y
|
|
CONFIG_RMII=y
|
|
CONFIG_SPECIFY_CONSOLE_INDEX=y
|
|
CONFIG_CONS_INDEX=5
|
|
CONFIG_SYS_NS16550=y
|
|
CONFIG_SPI=y
|
|
CONFIG_USB=y
|
|
CONFIG_SYS_USB_OHCI_SLOT_NAME="lpc32xx-ohci"
|
|
CONFIG_USB_OHCI_LPC32XX=y
|
|
CONFIG_OF_LIBFDT=y
|