7608d75f9c
if a board/$(VENDOR)/common/Makefile exists, build it. also add the first such case, board/freescale/common/Makefile, to handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as dictated by board configuration. thusly get rid of alternate build dir errors such as: FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory by putting the common/ mkdir command in its proper place (the common Makefile). Common bits from existing individual board Makefiles have been removed. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
106 lines
2.2 KiB
C
106 lines
2.2 KiB
C
/*
|
|
* Copyright (C) 2007 Freescale Semiconductor, Inc.
|
|
*
|
|
* Tony Li <tony.li@freescale.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation;
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <asm/io.h>
|
|
|
|
#ifdef CONFIG_PQ_MDS_PIB
|
|
|
|
#include "pq-mds-pib.h"
|
|
|
|
int pib_init(void)
|
|
{
|
|
u8 val8;
|
|
u8 orig_i2c_bus;
|
|
|
|
/* Switch temporarily to I2C bus #2 */
|
|
orig_i2c_bus = i2c_get_bus_num();
|
|
i2c_set_bus_num(1);
|
|
|
|
val8 = 0;
|
|
#if defined(CONFIG_PCI) && !defined(CONFIG_PCISLAVE)
|
|
/* Assign PIB PMC slot to desired PCI bus */
|
|
i2c_write(0x23, 0x6, 1, &val8, 1);
|
|
i2c_write(0x23, 0x7, 1, &val8, 1);
|
|
val8 = 0xff;
|
|
i2c_write(0x23, 0x2, 1, &val8, 1);
|
|
i2c_write(0x23, 0x3, 1, &val8, 1);
|
|
|
|
val8 = 0;
|
|
i2c_write(0x26, 0x6, 1, &val8, 1);
|
|
val8 = 0x34;
|
|
i2c_write(0x26, 0x7, 1, &val8, 1);
|
|
#if defined(CONFIG_MPC832XEMDS)
|
|
val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */
|
|
#else
|
|
val8 = 0xf3; /* PMC1, PMC2, PMC3 slot to PCI bus */
|
|
#endif
|
|
i2c_write(0x26, 0x2, 1, &val8, 1);
|
|
val8 = 0xff;
|
|
i2c_write(0x26, 0x3, 1, &val8, 1);
|
|
|
|
val8 = 0;
|
|
i2c_write(0x27, 0x6, 1, &val8, 1);
|
|
i2c_write(0x27, 0x7, 1, &val8, 1);
|
|
val8 = 0xff;
|
|
i2c_write(0x27, 0x2, 1, &val8, 1);
|
|
val8 = 0xef;
|
|
i2c_write(0x27, 0x3, 1, &val8, 1);
|
|
|
|
eieio();
|
|
|
|
#if defined(CONFIG_MPC832XEMDS)
|
|
printf("PCI 32bit bus on PMC2 &PMC3\n");
|
|
#else
|
|
printf("PCI 32bit bus on PMC1 & PMC2 &PMC3\n");
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_PQ_MDS_PIB_ATM)
|
|
#if defined(CONFIG_MPC8360EMDS)
|
|
val8 = 0;
|
|
i2c_write(0x20, 0x6, 1, &val8, 1);
|
|
i2c_write(0x20, 0x7, 1, &val8, 1);
|
|
|
|
val8 = 0xdf;
|
|
i2c_write(0x20, 0x2, 1, &val8, 1);
|
|
val8 = 0xf7;
|
|
i2c_write(0x20, 0x3, 1, &val8, 1);
|
|
|
|
eieio();
|
|
|
|
printf("QOC3 ATM card on PMC0\n");
|
|
#elif defined(CONFIG_MPC832XEMDS)
|
|
val = 0;
|
|
i2c_write(0x26, 0x7, 1, &val, 1);
|
|
val = 0xf7;
|
|
i2c_write(0x26, 0x3, 1, &val, 1);
|
|
|
|
val = 0;
|
|
i2c_write(0x21, 0x6, 1, &val, 1);
|
|
i2c_write(0x21, 0x7, 1, &val, 1);
|
|
|
|
val = 0xdf;
|
|
i2c_write(0x21, 0x2, 1, &val, 1);
|
|
val = 0xef;
|
|
i2c_write(0x21, 0x3, 1, &val, 1);
|
|
|
|
eieio();
|
|
|
|
printf("QOC3 ATM card on PMC1\n");
|
|
#endif
|
|
#endif
|
|
/* Reset to original I2C bus */
|
|
i2c_set_bus_num(orig_i2c_bus);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PQ_MDS_PIB */
|