e24b58f5ed
Currently we require PHY interface mode to be known when finding/creating the PHY - the functions * phy_connect_phy_id() * phy_device_create() * create_phy_by_mask() * search_for_existing_phy() * get_phy_device_by_mask() * phy_find_by_mask() all require the interface parameter, but the only thing done with it is that it is assigned to phydev->interface. This makes it impossible to find a PHY device without overwriting the set mode. Since the interface mode is not used during .probe() and should be used at first in .config(), drop the interface parameter from these functions. Make the default value of phydev->interface (in phy_device_create()) to be PHY_INTERFACE_MODE_NA. Move the interface parameter to phy_connect_dev(), where it should be. Change all occurrences treewide. In occurrences where we don't call phy_connect_dev() for some reason (they only configure the PHY without connecting it to an ethernet controller), set phydev->interface = value from phy_find_by_mask call. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
1047 lines
25 KiB
C
1047 lines
25 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* sh_eth.c - Driver for Renesas ethernet controller.
|
|
*
|
|
* Copyright (C) 2008, 2011 Renesas Solutions Corp.
|
|
* Copyright (c) 2008, 2011, 2014 2014 Nobuhiro Iwamatsu
|
|
* Copyright (c) 2007 Carlos Munoz <carlos@kenati.com>
|
|
* Copyright (C) 2013, 2014 Renesas Electronics Corporation
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <env.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <miiphy.h>
|
|
#include <asm/cache.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <linux/mii.h>
|
|
#include <asm/gpio.h>
|
|
#endif
|
|
|
|
#include "sh_eth.h"
|
|
|
|
#ifndef CONFIG_SH_ETHER_USE_PORT
|
|
# error "Please define CONFIG_SH_ETHER_USE_PORT"
|
|
#endif
|
|
#ifndef CONFIG_SH_ETHER_PHY_ADDR
|
|
# error "Please define CONFIG_SH_ETHER_PHY_ADDR"
|
|
#endif
|
|
|
|
#if defined(CONFIG_SH_ETHER_CACHE_WRITEBACK) && \
|
|
!CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
|
|
#define flush_cache_wback(addr, len) \
|
|
flush_dcache_range((unsigned long)addr, \
|
|
(unsigned long)(addr + ALIGN(len, CONFIG_SH_ETHER_ALIGNE_SIZE)))
|
|
#else
|
|
#define flush_cache_wback(...)
|
|
#endif
|
|
|
|
#if defined(CONFIG_SH_ETHER_CACHE_INVALIDATE) && defined(CONFIG_ARM)
|
|
#define invalidate_cache(addr, len) \
|
|
{ \
|
|
unsigned long line_size = CONFIG_SH_ETHER_ALIGNE_SIZE; \
|
|
unsigned long start, end; \
|
|
\
|
|
start = (unsigned long)addr; \
|
|
end = start + len; \
|
|
start &= ~(line_size - 1); \
|
|
end = ((end + line_size - 1) & ~(line_size - 1)); \
|
|
\
|
|
invalidate_dcache_range(start, end); \
|
|
}
|
|
#else
|
|
#define invalidate_cache(...)
|
|
#endif
|
|
|
|
#define TIMEOUT_CNT 1000
|
|
|
|
static int sh_eth_send_common(struct sh_eth_dev *eth, void *packet, int len)
|
|
{
|
|
int ret = 0, timeout;
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
|
|
if (!packet || len > 0xffff) {
|
|
printf(SHETHER_NAME ": %s: Invalid argument\n", __func__);
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
/* packet must be a 4 byte boundary */
|
|
if ((uintptr_t)packet & 3) {
|
|
printf(SHETHER_NAME ": %s: packet not 4 byte aligned\n"
|
|
, __func__);
|
|
ret = -EFAULT;
|
|
goto err;
|
|
}
|
|
|
|
/* Update tx descriptor */
|
|
flush_cache_wback(packet, len);
|
|
port_info->tx_desc_cur->td2 = ADDR_TO_PHY(packet);
|
|
port_info->tx_desc_cur->td1 = len << 16;
|
|
/* Must preserve the end of descriptor list indication */
|
|
if (port_info->tx_desc_cur->td0 & TD_TDLE)
|
|
port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP | TD_TDLE;
|
|
else
|
|
port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP;
|
|
|
|
flush_cache_wback(port_info->tx_desc_cur, sizeof(struct tx_desc_s));
|
|
|
|
/* Restart the transmitter if disabled */
|
|
if (!(sh_eth_read(port_info, EDTRR) & EDTRR_TRNS))
|
|
sh_eth_write(port_info, EDTRR_TRNS, EDTRR);
|
|
|
|
/* Wait until packet is transmitted */
|
|
timeout = TIMEOUT_CNT;
|
|
do {
|
|
invalidate_cache(port_info->tx_desc_cur,
|
|
sizeof(struct tx_desc_s));
|
|
udelay(100);
|
|
} while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--);
|
|
|
|
if (timeout < 0) {
|
|
printf(SHETHER_NAME ": transmit timeout\n");
|
|
ret = -ETIMEDOUT;
|
|
goto err;
|
|
}
|
|
|
|
port_info->tx_desc_cur++;
|
|
if (port_info->tx_desc_cur >= port_info->tx_desc_base + NUM_TX_DESC)
|
|
port_info->tx_desc_cur = port_info->tx_desc_base;
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int sh_eth_recv_start(struct sh_eth_dev *eth)
|
|
{
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
|
|
/* Check if the rx descriptor is ready */
|
|
invalidate_cache(port_info->rx_desc_cur, sizeof(struct rx_desc_s));
|
|
if (port_info->rx_desc_cur->rd0 & RD_RACT)
|
|
return -EINVAL;
|
|
|
|
/* Check for errors */
|
|
if (port_info->rx_desc_cur->rd0 & RD_RFE)
|
|
return -EINVAL;
|
|
|
|
return port_info->rx_desc_cur->rd1 & 0xffff;
|
|
}
|
|
|
|
static void sh_eth_recv_finish(struct sh_eth_dev *eth)
|
|
{
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
|
|
/* Make current descriptor available again */
|
|
if (port_info->rx_desc_cur->rd0 & RD_RDLE)
|
|
port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE;
|
|
else
|
|
port_info->rx_desc_cur->rd0 = RD_RACT;
|
|
|
|
flush_cache_wback(port_info->rx_desc_cur,
|
|
sizeof(struct rx_desc_s));
|
|
|
|
/* Point to the next descriptor */
|
|
port_info->rx_desc_cur++;
|
|
if (port_info->rx_desc_cur >=
|
|
port_info->rx_desc_base + NUM_RX_DESC)
|
|
port_info->rx_desc_cur = port_info->rx_desc_base;
|
|
}
|
|
|
|
static int sh_eth_reset(struct sh_eth_dev *eth)
|
|
{
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
|
|
int ret = 0, i;
|
|
|
|
/* Start e-dmac transmitter and receiver */
|
|
sh_eth_write(port_info, EDSR_ENALL, EDSR);
|
|
|
|
/* Perform a software reset and wait for it to complete */
|
|
sh_eth_write(port_info, EDMR_SRST, EDMR);
|
|
for (i = 0; i < TIMEOUT_CNT; i++) {
|
|
if (!(sh_eth_read(port_info, EDMR) & EDMR_SRST))
|
|
break;
|
|
udelay(1000);
|
|
}
|
|
|
|
if (i == TIMEOUT_CNT) {
|
|
printf(SHETHER_NAME ": Software reset timeout\n");
|
|
ret = -EIO;
|
|
}
|
|
|
|
return ret;
|
|
#else
|
|
sh_eth_write(port_info, sh_eth_read(port_info, EDMR) | EDMR_SRST, EDMR);
|
|
mdelay(3);
|
|
sh_eth_write(port_info,
|
|
sh_eth_read(port_info, EDMR) & ~EDMR_SRST, EDMR);
|
|
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
static int sh_eth_tx_desc_init(struct sh_eth_dev *eth)
|
|
{
|
|
int i, ret = 0;
|
|
u32 alloc_desc_size = NUM_TX_DESC * sizeof(struct tx_desc_s);
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
struct tx_desc_s *cur_tx_desc;
|
|
|
|
/*
|
|
* Allocate rx descriptors. They must be aligned to size of struct
|
|
* tx_desc_s.
|
|
*/
|
|
port_info->tx_desc_alloc =
|
|
memalign(sizeof(struct tx_desc_s), alloc_desc_size);
|
|
if (!port_info->tx_desc_alloc) {
|
|
printf(SHETHER_NAME ": memalign failed\n");
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
flush_cache_wback(port_info->tx_desc_alloc, alloc_desc_size);
|
|
|
|
/* Make sure we use a P2 address (non-cacheable) */
|
|
port_info->tx_desc_base =
|
|
(struct tx_desc_s *)ADDR_TO_P2((uintptr_t)port_info->tx_desc_alloc);
|
|
port_info->tx_desc_cur = port_info->tx_desc_base;
|
|
|
|
/* Initialize all descriptors */
|
|
for (cur_tx_desc = port_info->tx_desc_base, i = 0; i < NUM_TX_DESC;
|
|
cur_tx_desc++, i++) {
|
|
cur_tx_desc->td0 = 0x00;
|
|
cur_tx_desc->td1 = 0x00;
|
|
cur_tx_desc->td2 = 0x00;
|
|
}
|
|
|
|
/* Mark the end of the descriptors */
|
|
cur_tx_desc--;
|
|
cur_tx_desc->td0 |= TD_TDLE;
|
|
|
|
/*
|
|
* Point the controller to the tx descriptor list. Must use physical
|
|
* addresses
|
|
*/
|
|
sh_eth_write(port_info, ADDR_TO_PHY(port_info->tx_desc_base), TDLAR);
|
|
#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
|
|
sh_eth_write(port_info, ADDR_TO_PHY(port_info->tx_desc_base), TDFAR);
|
|
sh_eth_write(port_info, ADDR_TO_PHY(cur_tx_desc), TDFXR);
|
|
sh_eth_write(port_info, 0x01, TDFFR);/* Last discriptor bit */
|
|
#endif
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int sh_eth_rx_desc_init(struct sh_eth_dev *eth)
|
|
{
|
|
int i, ret = 0;
|
|
u32 alloc_desc_size = NUM_RX_DESC * sizeof(struct rx_desc_s);
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
struct rx_desc_s *cur_rx_desc;
|
|
u8 *rx_buf;
|
|
|
|
/*
|
|
* Allocate rx descriptors. They must be aligned to size of struct
|
|
* rx_desc_s.
|
|
*/
|
|
port_info->rx_desc_alloc =
|
|
memalign(sizeof(struct rx_desc_s), alloc_desc_size);
|
|
if (!port_info->rx_desc_alloc) {
|
|
printf(SHETHER_NAME ": memalign failed\n");
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
flush_cache_wback(port_info->rx_desc_alloc, alloc_desc_size);
|
|
|
|
/* Make sure we use a P2 address (non-cacheable) */
|
|
port_info->rx_desc_base =
|
|
(struct rx_desc_s *)ADDR_TO_P2((uintptr_t)port_info->rx_desc_alloc);
|
|
|
|
port_info->rx_desc_cur = port_info->rx_desc_base;
|
|
|
|
/*
|
|
* Allocate rx data buffers. They must be RX_BUF_ALIGNE_SIZE bytes
|
|
* aligned and in P2 area.
|
|
*/
|
|
port_info->rx_buf_alloc =
|
|
memalign(RX_BUF_ALIGNE_SIZE, NUM_RX_DESC * MAX_BUF_SIZE);
|
|
if (!port_info->rx_buf_alloc) {
|
|
printf(SHETHER_NAME ": alloc failed\n");
|
|
ret = -ENOMEM;
|
|
goto err_buf_alloc;
|
|
}
|
|
|
|
port_info->rx_buf_base = (u8 *)ADDR_TO_P2((uintptr_t)port_info->rx_buf_alloc);
|
|
|
|
/* Initialize all descriptors */
|
|
for (cur_rx_desc = port_info->rx_desc_base,
|
|
rx_buf = port_info->rx_buf_base, i = 0;
|
|
i < NUM_RX_DESC; cur_rx_desc++, rx_buf += MAX_BUF_SIZE, i++) {
|
|
cur_rx_desc->rd0 = RD_RACT;
|
|
cur_rx_desc->rd1 = MAX_BUF_SIZE << 16;
|
|
cur_rx_desc->rd2 = (u32)ADDR_TO_PHY(rx_buf);
|
|
}
|
|
|
|
/* Mark the end of the descriptors */
|
|
cur_rx_desc--;
|
|
cur_rx_desc->rd0 |= RD_RDLE;
|
|
|
|
/* Point the controller to the rx descriptor list */
|
|
sh_eth_write(port_info, ADDR_TO_PHY(port_info->rx_desc_base), RDLAR);
|
|
#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
|
|
sh_eth_write(port_info, ADDR_TO_PHY(port_info->rx_desc_base), RDFAR);
|
|
sh_eth_write(port_info, ADDR_TO_PHY(cur_rx_desc), RDFXR);
|
|
sh_eth_write(port_info, RDFFR_RDLF, RDFFR);
|
|
#endif
|
|
|
|
return ret;
|
|
|
|
err_buf_alloc:
|
|
free(port_info->rx_desc_alloc);
|
|
port_info->rx_desc_alloc = NULL;
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static void sh_eth_tx_desc_free(struct sh_eth_dev *eth)
|
|
{
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
|
|
if (port_info->tx_desc_alloc) {
|
|
free(port_info->tx_desc_alloc);
|
|
port_info->tx_desc_alloc = NULL;
|
|
}
|
|
}
|
|
|
|
static void sh_eth_rx_desc_free(struct sh_eth_dev *eth)
|
|
{
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
|
|
if (port_info->rx_desc_alloc) {
|
|
free(port_info->rx_desc_alloc);
|
|
port_info->rx_desc_alloc = NULL;
|
|
}
|
|
|
|
if (port_info->rx_buf_alloc) {
|
|
free(port_info->rx_buf_alloc);
|
|
port_info->rx_buf_alloc = NULL;
|
|
}
|
|
}
|
|
|
|
static int sh_eth_desc_init(struct sh_eth_dev *eth)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = sh_eth_tx_desc_init(eth);
|
|
if (ret)
|
|
goto err_tx_init;
|
|
|
|
ret = sh_eth_rx_desc_init(eth);
|
|
if (ret)
|
|
goto err_rx_init;
|
|
|
|
return ret;
|
|
err_rx_init:
|
|
sh_eth_tx_desc_free(eth);
|
|
|
|
err_tx_init:
|
|
return ret;
|
|
}
|
|
|
|
static void sh_eth_write_hwaddr(struct sh_eth_info *port_info,
|
|
unsigned char *mac)
|
|
{
|
|
u32 val;
|
|
|
|
val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
|
|
sh_eth_write(port_info, val, MAHR);
|
|
|
|
val = (mac[4] << 8) | mac[5];
|
|
sh_eth_write(port_info, val, MALR);
|
|
}
|
|
|
|
static void sh_eth_mac_regs_config(struct sh_eth_dev *eth, unsigned char *mac)
|
|
{
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
unsigned long edmr;
|
|
|
|
/* Configure e-dmac registers */
|
|
edmr = sh_eth_read(port_info, EDMR);
|
|
edmr &= ~EMDR_DESC_R;
|
|
edmr |= EMDR_DESC | EDMR_EL;
|
|
#if defined(CONFIG_R8A77980)
|
|
edmr |= EDMR_NBST;
|
|
#endif
|
|
sh_eth_write(port_info, edmr, EDMR);
|
|
|
|
sh_eth_write(port_info, 0, EESIPR);
|
|
sh_eth_write(port_info, 0, TRSCER);
|
|
sh_eth_write(port_info, 0, TFTR);
|
|
sh_eth_write(port_info, (FIFO_SIZE_T | FIFO_SIZE_R), FDR);
|
|
sh_eth_write(port_info, RMCR_RST, RMCR);
|
|
#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
|
|
sh_eth_write(port_info, 0, RPADIR);
|
|
#endif
|
|
sh_eth_write(port_info, (FIFO_F_D_RFF | FIFO_F_D_RFD), FCFTR);
|
|
|
|
/* Configure e-mac registers */
|
|
sh_eth_write(port_info, 0, ECSIPR);
|
|
|
|
/* Set Mac address */
|
|
sh_eth_write_hwaddr(port_info, mac);
|
|
|
|
sh_eth_write(port_info, RFLR_RFL_MIN, RFLR);
|
|
#if defined(SH_ETH_TYPE_GETHER)
|
|
sh_eth_write(port_info, 0, PIPR);
|
|
#endif
|
|
#if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
|
|
sh_eth_write(port_info, APR_AP, APR);
|
|
sh_eth_write(port_info, MPR_MP, MPR);
|
|
sh_eth_write(port_info, TPAUSER_TPAUSE, TPAUSER);
|
|
#endif
|
|
|
|
#if defined(CONFIG_CPU_SH7734) || defined(CONFIG_R8A7740)
|
|
sh_eth_write(port_info, CONFIG_SH_ETHER_SH7734_MII, RMII_MII);
|
|
#elif defined(CONFIG_RCAR_GEN2) || defined(CONFIG_R8A77980)
|
|
sh_eth_write(port_info, sh_eth_read(port_info, RMIIMR) | 0x1, RMIIMR);
|
|
#endif
|
|
}
|
|
|
|
static int sh_eth_phy_regs_config(struct sh_eth_dev *eth)
|
|
{
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
struct phy_device *phy = port_info->phydev;
|
|
int ret = 0;
|
|
u32 val = 0;
|
|
|
|
/* Set the transfer speed */
|
|
if (phy->speed == 100) {
|
|
printf(SHETHER_NAME ": 100Base/");
|
|
#if defined(SH_ETH_TYPE_GETHER)
|
|
sh_eth_write(port_info, GECMR_100B, GECMR);
|
|
#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
|
|
sh_eth_write(port_info, 1, RTRATE);
|
|
#elif defined(CONFIG_RCAR_GEN2) || defined(CONFIG_R8A77980)
|
|
val = ECMR_RTM;
|
|
#endif
|
|
} else if (phy->speed == 10) {
|
|
printf(SHETHER_NAME ": 10Base/");
|
|
#if defined(SH_ETH_TYPE_GETHER)
|
|
sh_eth_write(port_info, GECMR_10B, GECMR);
|
|
#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
|
|
sh_eth_write(port_info, 0, RTRATE);
|
|
#endif
|
|
}
|
|
#if defined(SH_ETH_TYPE_GETHER)
|
|
else if (phy->speed == 1000) {
|
|
printf(SHETHER_NAME ": 1000Base/");
|
|
sh_eth_write(port_info, GECMR_1000B, GECMR);
|
|
}
|
|
#endif
|
|
|
|
/* Check if full duplex mode is supported by the phy */
|
|
if (phy->duplex) {
|
|
printf("Full\n");
|
|
sh_eth_write(port_info,
|
|
val | (ECMR_CHG_DM | ECMR_RE | ECMR_TE | ECMR_DM),
|
|
ECMR);
|
|
} else {
|
|
printf("Half\n");
|
|
sh_eth_write(port_info,
|
|
val | (ECMR_CHG_DM | ECMR_RE | ECMR_TE),
|
|
ECMR);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void sh_eth_start(struct sh_eth_dev *eth)
|
|
{
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
|
|
/*
|
|
* Enable the e-dmac receiver only. The transmitter will be enabled when
|
|
* we have something to transmit
|
|
*/
|
|
sh_eth_write(port_info, EDRRR_R, EDRRR);
|
|
}
|
|
|
|
static void sh_eth_stop(struct sh_eth_dev *eth)
|
|
{
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
|
|
sh_eth_write(port_info, ~EDRRR_R, EDRRR);
|
|
}
|
|
|
|
static int sh_eth_init_common(struct sh_eth_dev *eth, unsigned char *mac)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = sh_eth_reset(eth);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = sh_eth_desc_init(eth);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sh_eth_mac_regs_config(eth, mac);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_start_common(struct sh_eth_dev *eth)
|
|
{
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
int ret;
|
|
|
|
ret = phy_startup(port_info->phydev);
|
|
if (ret) {
|
|
printf(SHETHER_NAME ": phy startup failure\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = sh_eth_phy_regs_config(eth);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sh_eth_start(eth);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_ETH
|
|
static int sh_eth_phy_config_legacy(struct sh_eth_dev *eth)
|
|
{
|
|
int ret = 0;
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
struct eth_device *dev = port_info->dev;
|
|
struct phy_device *phydev;
|
|
|
|
phydev = phy_connect(
|
|
miiphy_get_dev_by_name(dev->name),
|
|
port_info->phy_addr, dev, CONFIG_SH_ETHER_PHY_MODE);
|
|
port_info->phydev = phydev;
|
|
phy_config(phydev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sh_eth_send_legacy(struct eth_device *dev, void *packet, int len)
|
|
{
|
|
struct sh_eth_dev *eth = dev->priv;
|
|
|
|
return sh_eth_send_common(eth, packet, len);
|
|
}
|
|
|
|
static int sh_eth_recv_common(struct sh_eth_dev *eth)
|
|
{
|
|
int len = 0;
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
uchar *packet = (uchar *)ADDR_TO_P2(port_info->rx_desc_cur->rd2);
|
|
|
|
len = sh_eth_recv_start(eth);
|
|
if (len > 0) {
|
|
invalidate_cache(packet, len);
|
|
net_process_received_packet(packet, len);
|
|
sh_eth_recv_finish(eth);
|
|
} else
|
|
len = 0;
|
|
|
|
/* Restart the receiver if disabled */
|
|
if (!(sh_eth_read(port_info, EDRRR) & EDRRR_R))
|
|
sh_eth_write(port_info, EDRRR_R, EDRRR);
|
|
|
|
return len;
|
|
}
|
|
|
|
static int sh_eth_recv_legacy(struct eth_device *dev)
|
|
{
|
|
struct sh_eth_dev *eth = dev->priv;
|
|
|
|
return sh_eth_recv_common(eth);
|
|
}
|
|
|
|
static int sh_eth_init_legacy(struct eth_device *dev, struct bd_info *bd)
|
|
{
|
|
struct sh_eth_dev *eth = dev->priv;
|
|
int ret;
|
|
|
|
ret = sh_eth_init_common(eth, dev->enetaddr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = sh_eth_phy_config_legacy(eth);
|
|
if (ret) {
|
|
printf(SHETHER_NAME ": phy config timeout\n");
|
|
goto err_start;
|
|
}
|
|
|
|
ret = sh_eth_start_common(eth);
|
|
if (ret)
|
|
goto err_start;
|
|
|
|
return 0;
|
|
|
|
err_start:
|
|
sh_eth_tx_desc_free(eth);
|
|
sh_eth_rx_desc_free(eth);
|
|
return ret;
|
|
}
|
|
|
|
void sh_eth_halt_legacy(struct eth_device *dev)
|
|
{
|
|
struct sh_eth_dev *eth = dev->priv;
|
|
|
|
sh_eth_stop(eth);
|
|
}
|
|
|
|
int sh_eth_initialize(struct bd_info *bd)
|
|
{
|
|
int ret = 0;
|
|
struct sh_eth_dev *eth = NULL;
|
|
struct eth_device *dev = NULL;
|
|
struct mii_dev *mdiodev;
|
|
|
|
eth = (struct sh_eth_dev *)malloc(sizeof(struct sh_eth_dev));
|
|
if (!eth) {
|
|
printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
dev = (struct eth_device *)malloc(sizeof(struct eth_device));
|
|
if (!dev) {
|
|
printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
memset(dev, 0, sizeof(struct eth_device));
|
|
memset(eth, 0, sizeof(struct sh_eth_dev));
|
|
|
|
eth->port = CONFIG_SH_ETHER_USE_PORT;
|
|
eth->port_info[eth->port].phy_addr = CONFIG_SH_ETHER_PHY_ADDR;
|
|
eth->port_info[eth->port].iobase =
|
|
(void __iomem *)(BASE_IO_ADDR + 0x800 * eth->port);
|
|
|
|
dev->priv = (void *)eth;
|
|
dev->iobase = 0;
|
|
dev->init = sh_eth_init_legacy;
|
|
dev->halt = sh_eth_halt_legacy;
|
|
dev->send = sh_eth_send_legacy;
|
|
dev->recv = sh_eth_recv_legacy;
|
|
eth->port_info[eth->port].dev = dev;
|
|
|
|
strcpy(dev->name, SHETHER_NAME);
|
|
|
|
/* Register Device to EtherNet subsystem */
|
|
eth_register(dev);
|
|
|
|
bb_miiphy_buses[0].priv = eth;
|
|
mdiodev = mdio_alloc();
|
|
if (!mdiodev)
|
|
return -ENOMEM;
|
|
strlcpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
|
|
mdiodev->read = bb_miiphy_read;
|
|
mdiodev->write = bb_miiphy_write;
|
|
|
|
ret = mdio_register(mdiodev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (!eth_env_get_enetaddr("ethaddr", dev->enetaddr))
|
|
puts("Please set MAC address\n");
|
|
|
|
return ret;
|
|
|
|
err:
|
|
if (dev)
|
|
free(dev);
|
|
|
|
if (eth)
|
|
free(eth);
|
|
|
|
printf(SHETHER_NAME ": Failed\n");
|
|
return ret;
|
|
}
|
|
|
|
#else /* CONFIG_DM_ETH */
|
|
|
|
struct sh_ether_priv {
|
|
struct sh_eth_dev shdev;
|
|
|
|
struct mii_dev *bus;
|
|
phys_addr_t iobase;
|
|
struct clk clk;
|
|
struct gpio_desc reset_gpio;
|
|
};
|
|
|
|
static int sh_ether_send(struct udevice *dev, void *packet, int len)
|
|
{
|
|
struct sh_ether_priv *priv = dev_get_priv(dev);
|
|
struct sh_eth_dev *eth = &priv->shdev;
|
|
|
|
return sh_eth_send_common(eth, packet, len);
|
|
}
|
|
|
|
static int sh_ether_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct sh_ether_priv *priv = dev_get_priv(dev);
|
|
struct sh_eth_dev *eth = &priv->shdev;
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
uchar *packet = (uchar *)ADDR_TO_P2((uintptr_t)port_info->rx_desc_cur->rd2);
|
|
int len;
|
|
|
|
len = sh_eth_recv_start(eth);
|
|
if (len > 0) {
|
|
invalidate_cache(packet, len);
|
|
*packetp = packet;
|
|
|
|
return len;
|
|
} else {
|
|
len = 0;
|
|
|
|
/* Restart the receiver if disabled */
|
|
if (!(sh_eth_read(port_info, EDRRR) & EDRRR_R))
|
|
sh_eth_write(port_info, EDRRR_R, EDRRR);
|
|
|
|
return -EAGAIN;
|
|
}
|
|
}
|
|
|
|
static int sh_ether_free_pkt(struct udevice *dev, uchar *packet, int length)
|
|
{
|
|
struct sh_ether_priv *priv = dev_get_priv(dev);
|
|
struct sh_eth_dev *eth = &priv->shdev;
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
|
|
sh_eth_recv_finish(eth);
|
|
|
|
/* Restart the receiver if disabled */
|
|
if (!(sh_eth_read(port_info, EDRRR) & EDRRR_R))
|
|
sh_eth_write(port_info, EDRRR_R, EDRRR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_ether_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct sh_ether_priv *priv = dev_get_priv(dev);
|
|
struct sh_eth_dev *eth = &priv->shdev;
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
|
|
sh_eth_write_hwaddr(port_info, pdata->enetaddr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_phy_config(struct udevice *dev)
|
|
{
|
|
struct sh_ether_priv *priv = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct sh_eth_dev *eth = &priv->shdev;
|
|
int ret = 0;
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
struct phy_device *phydev;
|
|
int mask = 0xffffffff;
|
|
|
|
phydev = phy_find_by_mask(priv->bus, mask);
|
|
if (!phydev)
|
|
return -ENODEV;
|
|
|
|
phy_connect_dev(phydev, dev, pdata->phy_interface);
|
|
|
|
port_info->phydev = phydev;
|
|
phy_config(phydev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sh_ether_start(struct udevice *dev)
|
|
{
|
|
struct sh_ether_priv *priv = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct sh_eth_dev *eth = &priv->shdev;
|
|
int ret;
|
|
|
|
ret = sh_eth_init_common(eth, pdata->enetaddr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = sh_eth_start_common(eth);
|
|
if (ret)
|
|
goto err_start;
|
|
|
|
return 0;
|
|
|
|
err_start:
|
|
sh_eth_tx_desc_free(eth);
|
|
sh_eth_rx_desc_free(eth);
|
|
return ret;
|
|
}
|
|
|
|
static void sh_ether_stop(struct udevice *dev)
|
|
{
|
|
struct sh_ether_priv *priv = dev_get_priv(dev);
|
|
struct sh_eth_dev *eth = &priv->shdev;
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
|
|
phy_shutdown(port_info->phydev);
|
|
sh_eth_stop(&priv->shdev);
|
|
}
|
|
|
|
static int sh_ether_probe(struct udevice *udev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_plat(udev);
|
|
struct sh_ether_priv *priv = dev_get_priv(udev);
|
|
struct sh_eth_dev *eth = &priv->shdev;
|
|
struct ofnode_phandle_args phandle_args;
|
|
struct mii_dev *mdiodev;
|
|
int ret;
|
|
|
|
priv->iobase = pdata->iobase;
|
|
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
ret = clk_get_by_index(udev, 0, &priv->clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
#endif
|
|
|
|
ret = dev_read_phandle_with_args(udev, "phy-handle", NULL, 0, 0, &phandle_args);
|
|
if (!ret) {
|
|
gpio_request_by_name_nodev(phandle_args.node, "reset-gpios", 0,
|
|
&priv->reset_gpio, GPIOD_IS_OUT);
|
|
}
|
|
|
|
if (!dm_gpio_is_valid(&priv->reset_gpio)) {
|
|
gpio_request_by_name(udev, "reset-gpios", 0, &priv->reset_gpio,
|
|
GPIOD_IS_OUT);
|
|
}
|
|
|
|
mdiodev = mdio_alloc();
|
|
if (!mdiodev) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
mdiodev->read = bb_miiphy_read;
|
|
mdiodev->write = bb_miiphy_write;
|
|
bb_miiphy_buses[0].priv = eth;
|
|
snprintf(mdiodev->name, sizeof(mdiodev->name), udev->name);
|
|
|
|
ret = mdio_register(mdiodev);
|
|
if (ret < 0)
|
|
goto err_mdio_register;
|
|
|
|
priv->bus = miiphy_get_dev_by_name(udev->name);
|
|
|
|
eth->port = CONFIG_SH_ETHER_USE_PORT;
|
|
eth->port_info[eth->port].phy_addr = CONFIG_SH_ETHER_PHY_ADDR;
|
|
eth->port_info[eth->port].iobase =
|
|
(void __iomem *)(uintptr_t)(BASE_IO_ADDR + 0x800 * eth->port);
|
|
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
ret = clk_enable(&priv->clk);
|
|
if (ret)
|
|
goto err_mdio_register;
|
|
#endif
|
|
|
|
ret = sh_eth_init_common(eth, pdata->enetaddr);
|
|
if (ret)
|
|
goto err_phy_config;
|
|
|
|
ret = sh_eth_phy_config(udev);
|
|
if (ret) {
|
|
printf(SHETHER_NAME ": phy config timeout\n");
|
|
goto err_phy_config;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_phy_config:
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
clk_disable(&priv->clk);
|
|
#endif
|
|
err_mdio_register:
|
|
mdio_free(mdiodev);
|
|
return ret;
|
|
}
|
|
|
|
static int sh_ether_remove(struct udevice *udev)
|
|
{
|
|
struct sh_ether_priv *priv = dev_get_priv(udev);
|
|
struct sh_eth_dev *eth = &priv->shdev;
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
clk_disable(&priv->clk);
|
|
#endif
|
|
free(port_info->phydev);
|
|
mdio_unregister(priv->bus);
|
|
mdio_free(priv->bus);
|
|
|
|
if (dm_gpio_is_valid(&priv->reset_gpio))
|
|
dm_gpio_free(udev, &priv->reset_gpio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_ops sh_ether_ops = {
|
|
.start = sh_ether_start,
|
|
.send = sh_ether_send,
|
|
.recv = sh_ether_recv,
|
|
.free_pkt = sh_ether_free_pkt,
|
|
.stop = sh_ether_stop,
|
|
.write_hwaddr = sh_ether_write_hwaddr,
|
|
};
|
|
|
|
int sh_ether_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
const fdt32_t *cell;
|
|
|
|
pdata->iobase = dev_read_addr(dev);
|
|
|
|
pdata->phy_interface = dev_read_phy_mode(dev);
|
|
if (pdata->phy_interface == PHY_INTERFACE_MODE_NA)
|
|
return -EINVAL;
|
|
|
|
pdata->max_speed = 1000;
|
|
cell = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "max-speed", NULL);
|
|
if (cell)
|
|
pdata->max_speed = fdt32_to_cpu(*cell);
|
|
|
|
sprintf(bb_miiphy_buses[0].name, dev->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id sh_ether_ids[] = {
|
|
{ .compatible = "renesas,ether-r7s72100" },
|
|
{ .compatible = "renesas,ether-r8a7790" },
|
|
{ .compatible = "renesas,ether-r8a7791" },
|
|
{ .compatible = "renesas,ether-r8a7793" },
|
|
{ .compatible = "renesas,ether-r8a7794" },
|
|
{ .compatible = "renesas,gether-r8a77980" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(eth_sh_ether) = {
|
|
.name = "sh_ether",
|
|
.id = UCLASS_ETH,
|
|
.of_match = sh_ether_ids,
|
|
.of_to_plat = sh_ether_of_to_plat,
|
|
.probe = sh_ether_probe,
|
|
.remove = sh_ether_remove,
|
|
.ops = &sh_ether_ops,
|
|
.priv_auto = sizeof(struct sh_ether_priv),
|
|
.plat_auto = sizeof(struct eth_pdata),
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|
|
#endif
|
|
|
|
/******* for bb_miiphy *******/
|
|
static int sh_eth_bb_init(struct bb_miiphy_bus *bus)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_bb_mdio_active(struct bb_miiphy_bus *bus)
|
|
{
|
|
struct sh_eth_dev *eth = bus->priv;
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
|
|
sh_eth_write(port_info, sh_eth_read(port_info, PIR) | PIR_MMD, PIR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_bb_mdio_tristate(struct bb_miiphy_bus *bus)
|
|
{
|
|
struct sh_eth_dev *eth = bus->priv;
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
|
|
sh_eth_write(port_info, sh_eth_read(port_info, PIR) & ~PIR_MMD, PIR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_bb_set_mdio(struct bb_miiphy_bus *bus, int v)
|
|
{
|
|
struct sh_eth_dev *eth = bus->priv;
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
|
|
if (v)
|
|
sh_eth_write(port_info,
|
|
sh_eth_read(port_info, PIR) | PIR_MDO, PIR);
|
|
else
|
|
sh_eth_write(port_info,
|
|
sh_eth_read(port_info, PIR) & ~PIR_MDO, PIR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_bb_get_mdio(struct bb_miiphy_bus *bus, int *v)
|
|
{
|
|
struct sh_eth_dev *eth = bus->priv;
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
|
|
*v = (sh_eth_read(port_info, PIR) & PIR_MDI) >> 3;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_bb_set_mdc(struct bb_miiphy_bus *bus, int v)
|
|
{
|
|
struct sh_eth_dev *eth = bus->priv;
|
|
struct sh_eth_info *port_info = ð->port_info[eth->port];
|
|
|
|
if (v)
|
|
sh_eth_write(port_info,
|
|
sh_eth_read(port_info, PIR) | PIR_MDC, PIR);
|
|
else
|
|
sh_eth_write(port_info,
|
|
sh_eth_read(port_info, PIR) & ~PIR_MDC, PIR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_eth_bb_delay(struct bb_miiphy_bus *bus)
|
|
{
|
|
udelay(10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct bb_miiphy_bus bb_miiphy_buses[] = {
|
|
{
|
|
.name = "sh_eth",
|
|
.init = sh_eth_bb_init,
|
|
.mdio_active = sh_eth_bb_mdio_active,
|
|
.mdio_tristate = sh_eth_bb_mdio_tristate,
|
|
.set_mdio = sh_eth_bb_set_mdio,
|
|
.get_mdio = sh_eth_bb_get_mdio,
|
|
.set_mdc = sh_eth_bb_set_mdc,
|
|
.delay = sh_eth_bb_delay,
|
|
}
|
|
};
|
|
|
|
int bb_miiphy_buses_num = ARRAY_SIZE(bb_miiphy_buses);
|