u-boot/include/configs/thunderx_88xx.h
Tom Rini 86cf1c8285 configs: Migrate CONFIG_NR_DRAM_BANKS
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
  CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
  2), set this to 8.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-16 16:45:02 -04:00

74 lines
1.9 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/**
* (C) Copyright 2014, Cavium Inc.
**/
#ifndef __THUNDERX_88XX_H__
#define __THUNDERX_88XX_H__
#define CONFIG_REMAKE_ELF
#define CONFIG_THUNDERX
#define CONFIG_SYS_64BIT
#define MEM_BASE 0x00500000
#define CONFIG_SYS_LOWMEM_BASE MEM_BASE
/* Link Definitions */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
/* SMP Spin Table Definitions */
#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY (0x1800000) /* 24MHz */
#define CONFIG_SYS_MEMTEST_START MEM_BASE
#define CONFIG_SYS_MEMTEST_END (MEM_BASE + PHYS_SDRAM_1_SIZE)
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
/* PL011 Serial Configuration */
#define CONFIG_PL011_CLOCK 24000000
/* Generic Interrupt Controller Definitions */
#define GICD_BASE (0x801000000000)
#define GICR_BASE (0x801000002000)
#define CONFIG_SYS_SERIAL0 0x87e024000000
#define CONFIG_SYS_SERIAL1 0x87e025000000
/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR (MEM_BASE)
/* Physical Memory Map */
#define PHYS_SDRAM_1 (MEM_BASE) /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE (0x80000000-MEM_BASE) /* 2048 MB */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
/* Initial environment variables */
#define UBOOT_IMG_HEAD_SIZE 0x40
/* C80000 - 0x40 */
#define CONFIG_EXTRA_ENV_SETTINGS \
"kernel_addr=08007ffc0\0" \
"fdt_addr=0x94C00000\0" \
"fdt_high=0x9fffffff\0"
/* Do not preserve environment */
#define CONFIG_ENV_SIZE 0x1000
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
#define CONFIG_SYS_MAXARGS 64 /* max command args */
#define CONFIG_NO_RELOCATION 1
#define PLL_REF_CLK 50000000 /* 50 MHz */
#define NS_PER_REF_CLK_TICK (1000000000/PLL_REF_CLK)
#endif /* __THUNDERX_88XX_H__ */