eaf6ea6a1d
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
70 lines
1.9 KiB
Plaintext
70 lines
1.9 KiB
Plaintext
CONFIG_ARM=y
|
|
CONFIG_SKIP_LOWLEVEL_INIT=y
|
|
CONFIG_SYS_DCACHE_OFF=y
|
|
CONFIG_ARCH_CPU_INIT=y
|
|
CONFIG_ARCH_KIRKWOOD=y
|
|
CONFIG_SYS_KWD_CONFIG="board/Marvell/dreamplug/kwbimage.cfg"
|
|
CONFIG_SYS_TEXT_BASE=0x600000
|
|
CONFIG_NR_DRAM_BANKS=2
|
|
CONFIG_TARGET_DREAMPLUG=y
|
|
CONFIG_ENV_SIZE=0x1000
|
|
CONFIG_ENV_OFFSET=0x100000
|
|
CONFIG_ENV_SECT_SIZE=0x10000
|
|
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dreamplug"
|
|
CONFIG_IDENT_STRING="\nMarvell-DreamPlug"
|
|
CONFIG_SYS_LOAD_ADDR=0x800000
|
|
CONFIG_ENV_ADDR=0x100000
|
|
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
|
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000
|
|
# CONFIG_SYS_MALLOC_F is not set
|
|
CONFIG_BOOTDELAY=3
|
|
CONFIG_USE_BOOTCOMMAND=y
|
|
CONFIG_BOOTCOMMAND="setenv ethact ethernet-controller@72000; ${x_bootcmd_ethernet}; setenv ethact ethernet-controller@76000; ${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;"
|
|
CONFIG_USE_PREBOOT=y
|
|
# CONFIG_DISPLAY_BOARDINFO is not set
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_SYS_MAXARGS=32
|
|
# CONFIG_CMD_FLASH is not set
|
|
CONFIG_CMD_IDE=y
|
|
CONFIG_CMD_SATA=y
|
|
CONFIG_CMD_USB=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_DHCP=y
|
|
CONFIG_CMD_MII=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_CMD_EXT2=y
|
|
CONFIG_CMD_EXT4=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_ISO_PARTITION=y
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_ENV_OVERWRITE=y
|
|
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
|
CONFIG_ENV_SPI_MAX_HZ=50000000
|
|
CONFIG_NET_RANDOM_ETHADDR=y
|
|
CONFIG_NETCONSOLE=y
|
|
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
|
|
CONFIG_DM=y
|
|
CONFIG_SATA_MV=y
|
|
CONFIG_SYS_SATA_MAX_DEVICE=1
|
|
CONFIG_SYS_ATA_STRIDE=4
|
|
CONFIG_SYS_ATA_DATA_OFFSET=0x100
|
|
CONFIG_SYS_ATA_REG_OFFSET=0x100
|
|
CONFIG_SYS_ATA_ALT_OFFSET=0x100
|
|
# CONFIG_MMC is not set
|
|
CONFIG_MTD=y
|
|
CONFIG_DM_SPI_FLASH=y
|
|
CONFIG_SPI_FLASH_MACRONIX=y
|
|
CONFIG_PHY_MARVELL=y
|
|
CONFIG_DM_ETH=y
|
|
CONFIG_MVGBE=y
|
|
CONFIG_MII=y
|
|
CONFIG_DM_RTC=y
|
|
CONFIG_RTC_MV=y
|
|
CONFIG_SYS_NS16550=y
|
|
CONFIG_SPI=y
|
|
CONFIG_DM_SPI=y
|
|
CONFIG_KIRKWOOD_SPI=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_STORAGE=y
|