c69cda25c9
Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
760 lines
18 KiB
C
760 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <dm.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <pci.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
|
|
#define SROM_DLEVEL 0
|
|
|
|
/* PCI Registers. */
|
|
#define PCI_CFDA_PSM 0x43
|
|
|
|
#define CFRV_RN 0x000000f0 /* Revision Number */
|
|
|
|
#define WAKEUP 0x00 /* Power Saving Wakeup */
|
|
#define SLEEP 0x80 /* Power Saving Sleep Mode */
|
|
|
|
#define DC2114x_BRK 0x0020 /* CFRV break between DC21142 & DC21143 */
|
|
|
|
/* Ethernet chip registers. */
|
|
#define DE4X5_BMR 0x000 /* Bus Mode Register */
|
|
#define DE4X5_TPD 0x008 /* Transmit Poll Demand Reg */
|
|
#define DE4X5_RRBA 0x018 /* RX Ring Base Address Reg */
|
|
#define DE4X5_TRBA 0x020 /* TX Ring Base Address Reg */
|
|
#define DE4X5_STS 0x028 /* Status Register */
|
|
#define DE4X5_OMR 0x030 /* Operation Mode Register */
|
|
#define DE4X5_SICR 0x068 /* SIA Connectivity Register */
|
|
#define DE4X5_APROM 0x048 /* Ethernet Address PROM */
|
|
|
|
/* Register bits. */
|
|
#define BMR_SWR 0x00000001 /* Software Reset */
|
|
#define STS_TS 0x00700000 /* Transmit Process State */
|
|
#define STS_RS 0x000e0000 /* Receive Process State */
|
|
#define OMR_ST 0x00002000 /* Start/Stop Transmission Command */
|
|
#define OMR_SR 0x00000002 /* Start/Stop Receive */
|
|
#define OMR_PS 0x00040000 /* Port Select */
|
|
#define OMR_SDP 0x02000000 /* SD Polarity - MUST BE ASSERTED */
|
|
#define OMR_PM 0x00000080 /* Pass All Multicast */
|
|
|
|
/* Descriptor bits. */
|
|
#define R_OWN 0x80000000 /* Own Bit */
|
|
#define RD_RER 0x02000000 /* Receive End Of Ring */
|
|
#define RD_LS 0x00000100 /* Last Descriptor */
|
|
#define RD_ES 0x00008000 /* Error Summary */
|
|
#define TD_TER 0x02000000 /* Transmit End Of Ring */
|
|
#define T_OWN 0x80000000 /* Own Bit */
|
|
#define TD_LS 0x40000000 /* Last Segment */
|
|
#define TD_FS 0x20000000 /* First Segment */
|
|
#define TD_ES 0x00008000 /* Error Summary */
|
|
#define TD_SET 0x08000000 /* Setup Packet */
|
|
|
|
/* The EEPROM commands include the alway-set leading bit. */
|
|
#define SROM_WRITE_CMD 5
|
|
#define SROM_READ_CMD 6
|
|
#define SROM_ERASE_CMD 7
|
|
|
|
#define SROM_HWADD 0x0014 /* Hardware Address offset in SROM */
|
|
#define SROM_RD 0x00004000 /* Read from Boot ROM */
|
|
#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */
|
|
#define EE_WRITE_0 0x4801
|
|
#define EE_WRITE_1 0x4805
|
|
#define EE_DATA_READ 0x08 /* EEPROM chip data out. */
|
|
#define SROM_SR 0x00000800 /* Select Serial ROM when set */
|
|
|
|
#define DT_IN 0x00000004 /* Serial Data In */
|
|
#define DT_CLK 0x00000002 /* Serial ROM Clock */
|
|
#define DT_CS 0x00000001 /* Serial ROM Chip Select */
|
|
|
|
#define POLL_DEMAND 1
|
|
|
|
#if defined(CONFIG_DM_ETH)
|
|
#define phys_to_bus(dev, a) dm_pci_phys_to_mem((dev), (a))
|
|
#elif defined(CONFIG_E500)
|
|
#define phys_to_bus(dev, a) (a)
|
|
#else
|
|
#define phys_to_bus(dev, a) pci_phys_to_mem((dev), (a))
|
|
#endif
|
|
|
|
#define NUM_RX_DESC PKTBUFSRX
|
|
#define NUM_TX_DESC 1 /* Number of TX descriptors */
|
|
#define RX_BUFF_SZ PKTSIZE_ALIGN
|
|
|
|
#define TOUT_LOOP 1000000
|
|
|
|
#define SETUP_FRAME_LEN 192
|
|
|
|
struct de4x5_desc {
|
|
volatile s32 status;
|
|
u32 des1;
|
|
u32 buf;
|
|
u32 next;
|
|
};
|
|
|
|
struct dc2114x_priv {
|
|
struct de4x5_desc rx_ring[NUM_RX_DESC] __aligned(32);
|
|
struct de4x5_desc tx_ring[NUM_TX_DESC] __aligned(32);
|
|
int rx_new; /* RX descriptor ring pointer */
|
|
int tx_new; /* TX descriptor ring pointer */
|
|
char rx_ring_size;
|
|
char tx_ring_size;
|
|
#ifdef CONFIG_DM_ETH
|
|
struct udevice *devno;
|
|
#else
|
|
struct eth_device dev;
|
|
pci_dev_t devno;
|
|
#endif
|
|
char *name;
|
|
void __iomem *iobase;
|
|
u8 *enetaddr;
|
|
};
|
|
|
|
/* RX and TX descriptor ring */
|
|
static u32 dc2114x_inl(struct dc2114x_priv *priv, u32 addr)
|
|
{
|
|
return le32_to_cpu(readl(priv->iobase + addr));
|
|
}
|
|
|
|
static void dc2114x_outl(struct dc2114x_priv *priv, u32 command, u32 addr)
|
|
{
|
|
writel(cpu_to_le32(command), priv->iobase + addr);
|
|
}
|
|
|
|
static void reset_de4x5(struct dc2114x_priv *priv)
|
|
{
|
|
u32 i;
|
|
|
|
i = dc2114x_inl(priv, DE4X5_BMR);
|
|
mdelay(1);
|
|
dc2114x_outl(priv, i | BMR_SWR, DE4X5_BMR);
|
|
mdelay(1);
|
|
dc2114x_outl(priv, i, DE4X5_BMR);
|
|
mdelay(1);
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
dc2114x_inl(priv, DE4X5_BMR);
|
|
mdelay(10);
|
|
}
|
|
|
|
mdelay(1);
|
|
}
|
|
|
|
static void start_de4x5(struct dc2114x_priv *priv)
|
|
{
|
|
u32 omr;
|
|
|
|
omr = dc2114x_inl(priv, DE4X5_OMR);
|
|
omr |= OMR_ST | OMR_SR;
|
|
dc2114x_outl(priv, omr, DE4X5_OMR); /* Enable the TX and/or RX */
|
|
}
|
|
|
|
static void stop_de4x5(struct dc2114x_priv *priv)
|
|
{
|
|
u32 omr;
|
|
|
|
omr = dc2114x_inl(priv, DE4X5_OMR);
|
|
omr &= ~(OMR_ST | OMR_SR);
|
|
dc2114x_outl(priv, omr, DE4X5_OMR); /* Disable the TX and/or RX */
|
|
}
|
|
|
|
/* SROM Read and write routines. */
|
|
static void sendto_srom(struct dc2114x_priv *priv, u_int command, u_long addr)
|
|
{
|
|
dc2114x_outl(priv, command, addr);
|
|
udelay(1);
|
|
}
|
|
|
|
static int getfrom_srom(struct dc2114x_priv *priv, u_long addr)
|
|
{
|
|
u32 tmp = dc2114x_inl(priv, addr);
|
|
|
|
udelay(1);
|
|
return tmp;
|
|
}
|
|
|
|
/* Note: this routine returns extra data bits for size detection. */
|
|
static int do_read_eeprom(struct dc2114x_priv *priv, u_long ioaddr, int location,
|
|
int addr_len)
|
|
{
|
|
int read_cmd = location | (SROM_READ_CMD << addr_len);
|
|
unsigned int retval = 0;
|
|
int i;
|
|
|
|
sendto_srom(priv, SROM_RD | SROM_SR, ioaddr);
|
|
sendto_srom(priv, SROM_RD | SROM_SR | DT_CS, ioaddr);
|
|
|
|
debug_cond(SROM_DLEVEL >= 1, " EEPROM read at %d ", location);
|
|
|
|
/* Shift the read command bits out. */
|
|
for (i = 4 + addr_len; i >= 0; i--) {
|
|
short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
|
|
|
|
sendto_srom(priv, SROM_RD | SROM_SR | DT_CS | dataval,
|
|
ioaddr);
|
|
udelay(10);
|
|
sendto_srom(priv, SROM_RD | SROM_SR | DT_CS | dataval | DT_CLK,
|
|
ioaddr);
|
|
udelay(10);
|
|
debug_cond(SROM_DLEVEL >= 2, "%X",
|
|
getfrom_srom(priv, ioaddr) & 15);
|
|
retval = (retval << 1) |
|
|
!!(getfrom_srom(priv, ioaddr) & EE_DATA_READ);
|
|
}
|
|
|
|
sendto_srom(priv, SROM_RD | SROM_SR | DT_CS, ioaddr);
|
|
|
|
debug_cond(SROM_DLEVEL >= 2, " :%X:", getfrom_srom(priv, ioaddr) & 15);
|
|
|
|
for (i = 16; i > 0; i--) {
|
|
sendto_srom(priv, SROM_RD | SROM_SR | DT_CS | DT_CLK, ioaddr);
|
|
udelay(10);
|
|
debug_cond(SROM_DLEVEL >= 2, "%X",
|
|
getfrom_srom(priv, ioaddr) & 15);
|
|
retval = (retval << 1) |
|
|
!!(getfrom_srom(priv, ioaddr) & EE_DATA_READ);
|
|
sendto_srom(priv, SROM_RD | SROM_SR | DT_CS, ioaddr);
|
|
udelay(10);
|
|
}
|
|
|
|
/* Terminate the EEPROM access. */
|
|
sendto_srom(priv, SROM_RD | SROM_SR, ioaddr);
|
|
|
|
debug_cond(SROM_DLEVEL >= 2, " EEPROM value at %d is %5.5x.\n",
|
|
location, retval);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* This executes a generic EEPROM command, typically a write or write
|
|
* enable. It returns the data output from the EEPROM, and thus may
|
|
* also be used for reads.
|
|
*/
|
|
static int do_eeprom_cmd(struct dc2114x_priv *priv, u_long ioaddr, int cmd,
|
|
int cmd_len)
|
|
{
|
|
unsigned int retval = 0;
|
|
|
|
debug_cond(SROM_DLEVEL >= 1, " EEPROM op 0x%x: ", cmd);
|
|
|
|
sendto_srom(priv, SROM_RD | SROM_SR | DT_CS | DT_CLK, ioaddr);
|
|
|
|
/* Shift the command bits out. */
|
|
do {
|
|
short dataval = (cmd & BIT(cmd_len)) ? EE_WRITE_1 : EE_WRITE_0;
|
|
|
|
sendto_srom(priv, dataval, ioaddr);
|
|
udelay(10);
|
|
|
|
debug_cond(SROM_DLEVEL >= 2, "%X",
|
|
getfrom_srom(priv, ioaddr) & 15);
|
|
|
|
sendto_srom(priv, dataval | DT_CLK, ioaddr);
|
|
udelay(10);
|
|
retval = (retval << 1) |
|
|
!!(getfrom_srom(priv, ioaddr) & EE_DATA_READ);
|
|
} while (--cmd_len >= 0);
|
|
|
|
sendto_srom(priv, SROM_RD | SROM_SR | DT_CS, ioaddr);
|
|
|
|
/* Terminate the EEPROM access. */
|
|
sendto_srom(priv, SROM_RD | SROM_SR, ioaddr);
|
|
|
|
debug_cond(SROM_DLEVEL >= 1, " EEPROM result is 0x%5.5x.\n", retval);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int read_srom(struct dc2114x_priv *priv, u_long ioaddr, int index)
|
|
{
|
|
int ee_addr_size;
|
|
|
|
ee_addr_size = (do_read_eeprom(priv, ioaddr, 0xff, 8) & BIT(18)) ? 8 : 6;
|
|
|
|
return do_eeprom_cmd(priv, ioaddr, 0xffff |
|
|
(((SROM_READ_CMD << ee_addr_size) | index) << 16),
|
|
3 + ee_addr_size + 16);
|
|
}
|
|
|
|
static void send_setup_frame(struct dc2114x_priv *priv)
|
|
{
|
|
char setup_frame[SETUP_FRAME_LEN];
|
|
char *pa = &setup_frame[0];
|
|
int i;
|
|
|
|
memset(pa, 0xff, SETUP_FRAME_LEN);
|
|
|
|
for (i = 0; i < ETH_ALEN; i++) {
|
|
*(pa + (i & 1)) = priv->enetaddr[i];
|
|
if (i & 0x01)
|
|
pa += 4;
|
|
}
|
|
|
|
for (i = 0; priv->tx_ring[priv->tx_new].status & cpu_to_le32(T_OWN); i++) {
|
|
if (i < TOUT_LOOP)
|
|
continue;
|
|
|
|
printf("%s: tx error buffer not ready\n", priv->name);
|
|
return;
|
|
}
|
|
|
|
priv->tx_ring[priv->tx_new].buf = cpu_to_le32(phys_to_bus(priv->devno,
|
|
(u32)&setup_frame[0]));
|
|
priv->tx_ring[priv->tx_new].des1 = cpu_to_le32(TD_TER | TD_SET | SETUP_FRAME_LEN);
|
|
priv->tx_ring[priv->tx_new].status = cpu_to_le32(T_OWN);
|
|
|
|
dc2114x_outl(priv, POLL_DEMAND, DE4X5_TPD);
|
|
|
|
for (i = 0; priv->tx_ring[priv->tx_new].status & cpu_to_le32(T_OWN); i++) {
|
|
if (i < TOUT_LOOP)
|
|
continue;
|
|
|
|
printf("%s: tx buffer not ready\n", priv->name);
|
|
return;
|
|
}
|
|
|
|
if (le32_to_cpu(priv->tx_ring[priv->tx_new].status) != 0x7FFFFFFF) {
|
|
printf("TX error status2 = 0x%08X\n",
|
|
le32_to_cpu(priv->tx_ring[priv->tx_new].status));
|
|
}
|
|
|
|
priv->tx_new = (priv->tx_new + 1) % NUM_TX_DESC;
|
|
}
|
|
|
|
static int dc21x4x_send_common(struct dc2114x_priv *priv, void *packet, int length)
|
|
{
|
|
int status = -1;
|
|
int i;
|
|
|
|
if (length <= 0) {
|
|
printf("%s: bad packet size: %d\n", priv->name, length);
|
|
goto done;
|
|
}
|
|
|
|
for (i = 0; priv->tx_ring[priv->tx_new].status & cpu_to_le32(T_OWN); i++) {
|
|
if (i < TOUT_LOOP)
|
|
continue;
|
|
|
|
printf("%s: tx error buffer not ready\n", priv->name);
|
|
goto done;
|
|
}
|
|
|
|
priv->tx_ring[priv->tx_new].buf = cpu_to_le32(phys_to_bus(priv->devno,
|
|
(u32)packet));
|
|
priv->tx_ring[priv->tx_new].des1 = cpu_to_le32(TD_TER | TD_LS | TD_FS | length);
|
|
priv->tx_ring[priv->tx_new].status = cpu_to_le32(T_OWN);
|
|
|
|
dc2114x_outl(priv, POLL_DEMAND, DE4X5_TPD);
|
|
|
|
for (i = 0; priv->tx_ring[priv->tx_new].status & cpu_to_le32(T_OWN); i++) {
|
|
if (i < TOUT_LOOP)
|
|
continue;
|
|
|
|
printf(".%s: tx buffer not ready\n", priv->name);
|
|
goto done;
|
|
}
|
|
|
|
if (le32_to_cpu(priv->tx_ring[priv->tx_new].status) & TD_ES) {
|
|
priv->tx_ring[priv->tx_new].status = 0x0;
|
|
goto done;
|
|
}
|
|
|
|
status = length;
|
|
|
|
done:
|
|
priv->tx_new = (priv->tx_new + 1) % NUM_TX_DESC;
|
|
return status;
|
|
}
|
|
|
|
static int dc21x4x_recv_check(struct dc2114x_priv *priv)
|
|
{
|
|
int length = 0;
|
|
u32 status;
|
|
|
|
status = le32_to_cpu(priv->rx_ring[priv->rx_new].status);
|
|
|
|
if (status & R_OWN)
|
|
return 0;
|
|
|
|
if (status & RD_LS) {
|
|
/* Valid frame status. */
|
|
if (status & RD_ES) {
|
|
/* There was an error. */
|
|
printf("RX error status = 0x%08X\n", status);
|
|
return -EINVAL;
|
|
} else {
|
|
/* A valid frame received. */
|
|
length = (le32_to_cpu(priv->rx_ring[priv->rx_new].status)
|
|
>> 16);
|
|
|
|
return length;
|
|
}
|
|
}
|
|
|
|
return -EAGAIN;
|
|
}
|
|
|
|
static int dc21x4x_init_common(struct dc2114x_priv *priv)
|
|
{
|
|
int i;
|
|
|
|
reset_de4x5(priv);
|
|
|
|
if (dc2114x_inl(priv, DE4X5_STS) & (STS_TS | STS_RS)) {
|
|
printf("Error: Cannot reset ethernet controller.\n");
|
|
return -1;
|
|
}
|
|
|
|
dc2114x_outl(priv, OMR_SDP | OMR_PS | OMR_PM, DE4X5_OMR);
|
|
|
|
for (i = 0; i < NUM_RX_DESC; i++) {
|
|
priv->rx_ring[i].status = cpu_to_le32(R_OWN);
|
|
priv->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
|
|
priv->rx_ring[i].buf = cpu_to_le32(phys_to_bus(priv->devno,
|
|
(u32)net_rx_packets[i]));
|
|
priv->rx_ring[i].next = 0;
|
|
}
|
|
|
|
for (i = 0; i < NUM_TX_DESC; i++) {
|
|
priv->tx_ring[i].status = 0;
|
|
priv->tx_ring[i].des1 = 0;
|
|
priv->tx_ring[i].buf = 0;
|
|
priv->tx_ring[i].next = 0;
|
|
}
|
|
|
|
priv->rx_ring_size = NUM_RX_DESC;
|
|
priv->tx_ring_size = NUM_TX_DESC;
|
|
|
|
/* Write the end of list marker to the descriptor lists. */
|
|
priv->rx_ring[priv->rx_ring_size - 1].des1 |= cpu_to_le32(RD_RER);
|
|
priv->tx_ring[priv->tx_ring_size - 1].des1 |= cpu_to_le32(TD_TER);
|
|
|
|
/* Tell the adapter where the TX/RX rings are located. */
|
|
dc2114x_outl(priv, phys_to_bus(priv->devno, (u32)&priv->rx_ring),
|
|
DE4X5_RRBA);
|
|
dc2114x_outl(priv, phys_to_bus(priv->devno, (u32)&priv->tx_ring),
|
|
DE4X5_TRBA);
|
|
|
|
start_de4x5(priv);
|
|
|
|
priv->tx_new = 0;
|
|
priv->rx_new = 0;
|
|
|
|
send_setup_frame(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dc21x4x_halt_common(struct dc2114x_priv *priv)
|
|
{
|
|
stop_de4x5(priv);
|
|
dc2114x_outl(priv, 0, DE4X5_SICR);
|
|
}
|
|
|
|
static void read_hw_addr(struct dc2114x_priv *priv)
|
|
{
|
|
u_short tmp, *p = (u_short *)(&priv->enetaddr[0]);
|
|
int i, j = 0;
|
|
|
|
for (i = 0; i < (ETH_ALEN >> 1); i++) {
|
|
tmp = read_srom(priv, DE4X5_APROM, (SROM_HWADD >> 1) + i);
|
|
*p = le16_to_cpu(tmp);
|
|
j += *p++;
|
|
}
|
|
|
|
if (!j || j == 0x2fffd) {
|
|
memset(priv->enetaddr, 0, ETH_ALEN);
|
|
debug("Warning: can't read HW address from SROM.\n");
|
|
}
|
|
}
|
|
|
|
static struct pci_device_id supported[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142) },
|
|
{ }
|
|
};
|
|
|
|
#ifndef CONFIG_DM_ETH
|
|
static int dc21x4x_init(struct eth_device *dev, struct bd_info *bis)
|
|
{
|
|
struct dc2114x_priv *priv =
|
|
container_of(dev, struct dc2114x_priv, dev);
|
|
|
|
/* Ensure we're not sleeping. */
|
|
pci_write_config_byte(priv->devno, PCI_CFDA_PSM, WAKEUP);
|
|
|
|
return dc21x4x_init_common(priv);
|
|
}
|
|
|
|
static void dc21x4x_halt(struct eth_device *dev)
|
|
{
|
|
struct dc2114x_priv *priv =
|
|
container_of(dev, struct dc2114x_priv, dev);
|
|
|
|
dc21x4x_halt_common(priv);
|
|
|
|
pci_write_config_byte(priv->devno, PCI_CFDA_PSM, SLEEP);
|
|
}
|
|
|
|
static int dc21x4x_send(struct eth_device *dev, void *packet, int length)
|
|
{
|
|
struct dc2114x_priv *priv =
|
|
container_of(dev, struct dc2114x_priv, dev);
|
|
|
|
return dc21x4x_send_common(priv, packet, length);
|
|
}
|
|
|
|
static int dc21x4x_recv(struct eth_device *dev)
|
|
{
|
|
struct dc2114x_priv *priv =
|
|
container_of(dev, struct dc2114x_priv, dev);
|
|
int length = 0;
|
|
int ret;
|
|
|
|
while (true) {
|
|
ret = dc21x4x_recv_check(priv);
|
|
if (!ret)
|
|
break;
|
|
|
|
if (ret > 0) {
|
|
length = ret;
|
|
/* Pass the packet up to the protocol layers */
|
|
net_process_received_packet
|
|
(net_rx_packets[priv->rx_new], length - 4);
|
|
}
|
|
|
|
/*
|
|
* Change buffer ownership for this frame,
|
|
* back to the adapter.
|
|
*/
|
|
if (ret != -EAGAIN)
|
|
priv->rx_ring[priv->rx_new].status = cpu_to_le32(R_OWN);
|
|
|
|
/* Update entry information. */
|
|
priv->rx_new = (priv->rx_new + 1) % priv->rx_ring_size;
|
|
}
|
|
|
|
return length;
|
|
}
|
|
|
|
int dc21x4x_initialize(struct bd_info *bis)
|
|
{
|
|
struct dc2114x_priv *priv;
|
|
struct eth_device *dev;
|
|
unsigned short status;
|
|
unsigned char timer;
|
|
unsigned int iobase;
|
|
int card_number = 0;
|
|
pci_dev_t devbusfn;
|
|
int idx = 0;
|
|
|
|
while (1) {
|
|
devbusfn = pci_find_devices(supported, idx++);
|
|
if (devbusfn == -1)
|
|
break;
|
|
|
|
pci_read_config_word(devbusfn, PCI_COMMAND, &status);
|
|
status |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
|
|
pci_write_config_word(devbusfn, PCI_COMMAND, status);
|
|
|
|
pci_read_config_word(devbusfn, PCI_COMMAND, &status);
|
|
if (!(status & PCI_COMMAND_MEMORY)) {
|
|
printf("Error: Can not enable MEMORY access.\n");
|
|
continue;
|
|
}
|
|
|
|
if (!(status & PCI_COMMAND_MASTER)) {
|
|
printf("Error: Can not enable Bus Mastering.\n");
|
|
continue;
|
|
}
|
|
|
|
/* Check the latency timer for values >= 0x60. */
|
|
pci_read_config_byte(devbusfn, PCI_LATENCY_TIMER, &timer);
|
|
|
|
if (timer < 0x60) {
|
|
pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER,
|
|
0x60);
|
|
}
|
|
|
|
/* read BAR for memory space access */
|
|
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, &iobase);
|
|
iobase &= PCI_BASE_ADDRESS_MEM_MASK;
|
|
debug("dc21x4x: DEC 21142 PCI Device @0x%x\n", iobase);
|
|
|
|
priv = memalign(32, sizeof(*priv));
|
|
if (!priv) {
|
|
printf("Can not allocalte memory of dc21x4x\n");
|
|
break;
|
|
}
|
|
memset(priv, 0, sizeof(*priv));
|
|
|
|
dev = &priv->dev;
|
|
|
|
sprintf(dev->name, "dc21x4x#%d", card_number);
|
|
priv->devno = devbusfn;
|
|
priv->name = dev->name;
|
|
priv->enetaddr = dev->enetaddr;
|
|
|
|
dev->iobase = pci_mem_to_phys(devbusfn, iobase);
|
|
dev->priv = (void *)devbusfn;
|
|
dev->init = dc21x4x_init;
|
|
dev->halt = dc21x4x_halt;
|
|
dev->send = dc21x4x_send;
|
|
dev->recv = dc21x4x_recv;
|
|
|
|
/* Ensure we're not sleeping. */
|
|
pci_write_config_byte(devbusfn, PCI_CFDA_PSM, WAKEUP);
|
|
|
|
udelay(10 * 1000);
|
|
|
|
read_hw_addr(priv);
|
|
|
|
eth_register(dev);
|
|
|
|
card_number++;
|
|
}
|
|
|
|
return card_number;
|
|
}
|
|
|
|
#else /* DM_ETH */
|
|
static int dc2114x_start(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *plat = dev_get_plat(dev);
|
|
struct dc2114x_priv *priv = dev_get_priv(dev);
|
|
|
|
memcpy(priv->enetaddr, plat->enetaddr, sizeof(plat->enetaddr));
|
|
|
|
/* Ensure we're not sleeping. */
|
|
dm_pci_write_config8(dev, PCI_CFDA_PSM, WAKEUP);
|
|
|
|
return dc21x4x_init_common(priv);
|
|
}
|
|
|
|
static void dc2114x_stop(struct udevice *dev)
|
|
{
|
|
struct dc2114x_priv *priv = dev_get_priv(dev);
|
|
|
|
dc21x4x_halt_common(priv);
|
|
|
|
dm_pci_write_config8(dev, PCI_CFDA_PSM, SLEEP);
|
|
}
|
|
|
|
static int dc2114x_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct dc2114x_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = dc21x4x_send_common(priv, packet, length);
|
|
|
|
return ret ? 0 : -ETIMEDOUT;
|
|
}
|
|
|
|
static int dc2114x_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct dc2114x_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = dc21x4x_recv_check(priv);
|
|
|
|
if (ret < 0) {
|
|
/* Update entry information. */
|
|
priv->rx_new = (priv->rx_new + 1) % priv->rx_ring_size;
|
|
ret = 0;
|
|
}
|
|
|
|
if (!ret)
|
|
return 0;
|
|
|
|
*packetp = net_rx_packets[priv->rx_new];
|
|
|
|
return ret - 4;
|
|
}
|
|
|
|
static int dc2114x_free_pkt(struct udevice *dev, uchar *packet, int length)
|
|
{
|
|
struct dc2114x_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->rx_ring[priv->rx_new].status = cpu_to_le32(R_OWN);
|
|
|
|
/* Update entry information. */
|
|
priv->rx_new = (priv->rx_new + 1) % priv->rx_ring_size;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dc2114x_read_rom_hwaddr(struct udevice *dev)
|
|
{
|
|
struct dc2114x_priv *priv = dev_get_priv(dev);
|
|
|
|
read_hw_addr(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dc2114x_bind(struct udevice *dev)
|
|
{
|
|
static int card_number;
|
|
char name[16];
|
|
|
|
sprintf(name, "dc2114x#%u", card_number++);
|
|
|
|
return device_set_name(dev, name);
|
|
}
|
|
|
|
static int dc2114x_probe(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *plat = dev_get_plat(dev);
|
|
struct dc2114x_priv *priv = dev_get_priv(dev);
|
|
u16 command, status;
|
|
u32 iobase;
|
|
|
|
dm_pci_read_config32(dev, PCI_BASE_ADDRESS_1, &iobase);
|
|
iobase &= ~0xf;
|
|
|
|
debug("dc2114x: DEC 2114x PCI Device @0x%x\n", iobase);
|
|
|
|
priv->devno = dev;
|
|
priv->enetaddr = plat->enetaddr;
|
|
priv->iobase = (void __iomem *)dm_pci_mem_to_phys(dev, iobase);
|
|
|
|
command = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
|
|
dm_pci_write_config16(dev, PCI_COMMAND, command);
|
|
dm_pci_read_config16(dev, PCI_COMMAND, &status);
|
|
if ((status & command) != command) {
|
|
printf("dc2114x: Couldn't enable IO access or Bus Mastering\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dm_pci_write_config8(dev, PCI_LATENCY_TIMER, 0x60);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_ops dc2114x_ops = {
|
|
.start = dc2114x_start,
|
|
.send = dc2114x_send,
|
|
.recv = dc2114x_recv,
|
|
.stop = dc2114x_stop,
|
|
.free_pkt = dc2114x_free_pkt,
|
|
.read_rom_hwaddr = dc2114x_read_rom_hwaddr,
|
|
};
|
|
|
|
U_BOOT_DRIVER(eth_dc2114x) = {
|
|
.name = "eth_dc2114x",
|
|
.id = UCLASS_ETH,
|
|
.bind = dc2114x_bind,
|
|
.probe = dc2114x_probe,
|
|
.ops = &dc2114x_ops,
|
|
.priv_auto = sizeof(struct dc2114x_priv),
|
|
.plat_auto = sizeof(struct eth_pdata),
|
|
};
|
|
|
|
U_BOOT_PCI_DEVICE(eth_dc2114x, supported);
|
|
#endif
|