a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
93 lines
2.4 KiB
Plaintext
93 lines
2.4 KiB
Plaintext
CONFIG_PPC=y
|
|
CONFIG_SYS_TEXT_BASE=0xFF800000
|
|
CONFIG_ENV_SIZE=0x2000
|
|
CONFIG_ENV_SECT_SIZE=0x20000
|
|
CONFIG_SYS_CLK_FREQ=66000000
|
|
CONFIG_MPC83xx=y
|
|
CONFIG_HIGH_BATS=y
|
|
CONFIG_TARGET_SBC8349=y
|
|
CONFIG_DDR_MC_CLOCK_MODE_1_1=y
|
|
CONFIG_SYSTEM_PLL_FACTOR_4_1=y
|
|
CONFIG_CORE_PLL_RATIO_2_1=y
|
|
CONFIG_PCI_HOST_MODE_ENABLE=y
|
|
CONFIG_PCI_INT_ARBITER1_ENABLE=y
|
|
CONFIG_PCI_INT_ARBITER2_ENABLE=y
|
|
CONFIG_BOOT_MEMORY_SPACE_LOW=y
|
|
CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
|
|
CONFIG_TSEC1_MODE_GMII=y
|
|
CONFIG_TSEC2_MODE_GMII=y
|
|
CONFIG_BAT0=y
|
|
CONFIG_BAT0_NAME="SDRAM"
|
|
CONFIG_BAT0_BASE=0x00000000
|
|
CONFIG_BAT0_LENGTH_256_MBYTES=y
|
|
CONFIG_BAT0_ACCESS_RW=y
|
|
CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
|
|
CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
|
|
CONFIG_BAT0_USER_MODE_VALID=y
|
|
CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
|
|
CONFIG_BAT5=y
|
|
CONFIG_BAT5_NAME="IMMR_PCIIO"
|
|
CONFIG_BAT5_BASE=0xE0000000
|
|
CONFIG_BAT5_LENGTH_256_MBYTES=y
|
|
CONFIG_BAT5_ACCESS_RW=y
|
|
CONFIG_BAT5_ICACHE_INHIBITED=y
|
|
CONFIG_BAT5_ICACHE_GUARDED=y
|
|
CONFIG_BAT5_DCACHE_INHIBITED=y
|
|
CONFIG_BAT5_DCACHE_GUARDED=y
|
|
CONFIG_BAT5_USER_MODE_VALID=y
|
|
CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
|
|
CONFIG_BAT6=y
|
|
CONFIG_BAT6_NAME="LBC_INITRAM_FLASH"
|
|
CONFIG_BAT6_BASE=0xF0000000
|
|
CONFIG_BAT6_LENGTH_256_MBYTES=y
|
|
CONFIG_BAT6_ACCESS_RW=y
|
|
CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
|
|
CONFIG_BAT6_ICACHE_GUARDED=y
|
|
CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
|
|
CONFIG_BAT6_DCACHE_GUARDED=y
|
|
CONFIG_BAT6_USER_MODE_VALID=y
|
|
CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
|
|
CONFIG_LBLAW0=y
|
|
CONFIG_LBLAW0_BASE=0xFF800000
|
|
CONFIG_LBLAW0_NAME="FLASH"
|
|
CONFIG_LBLAW0_LENGTH_8_MBYTES=y
|
|
CONFIG_ELBC_BR0_OR0=y
|
|
CONFIG_BR0_OR0_NAME="FLASH"
|
|
CONFIG_BR0_OR0_BASE=0xFF800000
|
|
CONFIG_BR0_PORTSIZE_16BIT=y
|
|
CONFIG_OR0_AM_8_MBYTES=y
|
|
CONFIG_OR0_XAM_SET=y
|
|
CONFIG_OR0_SCY_15=y
|
|
CONFIG_OR0_CSNT_EARLIER=y
|
|
CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
|
|
CONFIG_OR0_XACS_EXTENDED=y
|
|
CONFIG_OR0_TRLX_RELAXED=y
|
|
CONFIG_OR0_EHTR_8_CYCLE=y
|
|
CONFIG_OR0_EAD_EXTRA=y
|
|
CONFIG_HID0_FINAL_EMCP=y
|
|
CONFIG_HID0_FINAL_ICE=y
|
|
CONFIG_HID2_HBE=y
|
|
CONFIG_LCRR_DBYP_PLL_BYPASSED=y
|
|
CONFIG_LCRR_CLKDIV_4=y
|
|
CONFIG_OF_BOARD_SETUP=y
|
|
CONFIG_OF_STDOUT_VIA_ALIAS=y
|
|
CONFIG_BOOTDELAY=6
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_CMD_IMLS=y
|
|
CONFIG_CMD_I2C=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_MII=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
|
|
CONFIG_ENV_ADDR=0xFF840000
|
|
CONFIG_ENV_ADDR_REDUND=0xFF860000
|
|
# CONFIG_MMC is not set
|
|
CONFIG_MTD_NOR_FLASH=y
|
|
CONFIG_FLASH_CFI_DRIVER=y
|
|
CONFIG_SYS_FLASH_CFI=y
|
|
CONFIG_PHY_MARVELL=y
|
|
CONFIG_TSEC_ENET=y
|
|
# CONFIG_PCI is not set
|
|
CONFIG_SYS_NS16550=y
|
|
CONFIG_OF_LIBFDT=y
|