609 lines
13 KiB
C
609 lines
13 KiB
C
/*
|
|
* (C) Copyright 2001-2005
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* Flash Routines for Intel devices
|
|
*
|
|
*--------------------------------------------------------------------
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc8xx.h>
|
|
#include "cpu87.h"
|
|
|
|
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
ulong flash_int_get_size (volatile unsigned long *baseaddr,
|
|
flash_info_t * info)
|
|
{
|
|
short i;
|
|
unsigned long flashtest_h, flashtest_l;
|
|
|
|
info->sector_count = info->size = 0;
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
|
|
/* Write identify command sequence and test FLASH answer
|
|
*/
|
|
baseaddr[0] = 0x00900090;
|
|
baseaddr[1] = 0x00900090;
|
|
|
|
flashtest_h = baseaddr[0]; /* manufacturer ID */
|
|
flashtest_l = baseaddr[1];
|
|
|
|
if (flashtest_h != INTEL_MANUFACT || flashtest_l != INTEL_MANUFACT)
|
|
return (0); /* no or unknown flash */
|
|
|
|
flashtest_h = baseaddr[2]; /* device ID */
|
|
flashtest_l = baseaddr[3];
|
|
|
|
if (flashtest_h != flashtest_l)
|
|
return (0);
|
|
|
|
switch (flashtest_h) {
|
|
case INTEL_ID_28F160C3B:
|
|
info->flash_id = FLASH_28F160C3B;
|
|
info->sector_count = 39;
|
|
info->size = 0x00800000; /* 4 * 2 MB = 8 MB */
|
|
break;
|
|
case INTEL_ID_28F160F3B:
|
|
info->flash_id = FLASH_28F160F3B;
|
|
info->sector_count = 39;
|
|
info->size = 0x00800000; /* 4 * 2 MB = 8 MB */
|
|
break;
|
|
case INTEL_ID_28F640C3B:
|
|
info->flash_id = FLASH_28F640C3B;
|
|
info->sector_count = 135;
|
|
info->size = 0x02000000; /* 16 * 2 MB = 32 MB */
|
|
break;
|
|
default:
|
|
return (0); /* no or unknown flash */
|
|
}
|
|
|
|
info->flash_id |= INTEL_MANUFACT << 16; /* set manufacturer offset */
|
|
|
|
if (info->flash_id & FLASH_BTYPE) {
|
|
volatile unsigned long *tmp = baseaddr;
|
|
|
|
/* set up sector start adress table (bottom sector type)
|
|
* AND unlock the sectors (if our chip is 160C3)
|
|
*/
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
if (((info->flash_id & FLASH_TYPEMASK) == FLASH_28F160C3B) ||
|
|
((info->flash_id & FLASH_TYPEMASK) == FLASH_28F640C3B)) {
|
|
tmp[0] = 0x00600060;
|
|
tmp[1] = 0x00600060;
|
|
tmp[0] = 0x00D000D0;
|
|
tmp[1] = 0x00D000D0;
|
|
}
|
|
info->start[i] = (uint) tmp;
|
|
tmp += i < 8 ? 0x2000 : 0x10000; /* pointer arith */
|
|
}
|
|
}
|
|
|
|
memset (info->protect, 0, info->sector_count);
|
|
|
|
baseaddr[0] = 0x00FF00FF;
|
|
baseaddr[1] = 0x00FF00FF;
|
|
|
|
return (info->size);
|
|
}
|
|
|
|
static ulong flash_amd_get_size (vu_char *addr, flash_info_t *info)
|
|
{
|
|
short i;
|
|
uchar vendor, devid;
|
|
ulong base = (ulong)addr;
|
|
|
|
/* Write auto select command: read Manufacturer ID */
|
|
addr[0x0555] = 0xAA;
|
|
addr[0x02AA] = 0x55;
|
|
addr[0x0555] = 0x90;
|
|
|
|
udelay(1000);
|
|
|
|
vendor = addr[0];
|
|
devid = addr[1] & 0xff;
|
|
|
|
/* only support AMD */
|
|
if (vendor != 0x01) {
|
|
return 0;
|
|
}
|
|
|
|
vendor &= 0xf;
|
|
devid &= 0xff;
|
|
|
|
if (devid == AMD_ID_F040B) {
|
|
info->flash_id = vendor << 16 | devid;
|
|
info->sector_count = 8;
|
|
info->size = info->sector_count * 0x10000;
|
|
}
|
|
else if (devid == AMD_ID_F080B) {
|
|
info->flash_id = vendor << 16 | devid;
|
|
info->sector_count = 16;
|
|
info->size = 4 * info->sector_count * 0x10000;
|
|
}
|
|
else if (devid == AMD_ID_F016D) {
|
|
info->flash_id = vendor << 16 | devid;
|
|
info->sector_count = 32;
|
|
info->size = 4 * info->sector_count * 0x10000;
|
|
}
|
|
else {
|
|
printf ("## Unknown Flash Type: %02x\n", devid);
|
|
return 0;
|
|
}
|
|
|
|
/* check for protected sectors */
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
/* sector base address */
|
|
info->start[i] = base + i * (info->size / info->sector_count);
|
|
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
|
|
/* D0 = 1 if protected */
|
|
addr = (volatile unsigned char *)(info->start[i]);
|
|
info->protect[i] = addr[2] & 1;
|
|
}
|
|
|
|
/*
|
|
* Prevent writes to uninitialized FLASH.
|
|
*/
|
|
if (info->flash_id != FLASH_UNKNOWN) {
|
|
addr = (vu_char *)info->start[0];
|
|
addr[0] = 0xF0; /* reset bank */
|
|
}
|
|
|
|
return (info->size);
|
|
}
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
unsigned long flash_init (void)
|
|
{
|
|
unsigned long size_b0 = 0;
|
|
unsigned long size_b1 = 0;
|
|
int i;
|
|
|
|
/* Init: no FLASHes known
|
|
*/
|
|
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
|
|
flash_info[i].flash_id = FLASH_UNKNOWN;
|
|
}
|
|
|
|
/* Disable flash protection */
|
|
CPU86_BCR |= (CPU86_BCR_FWPT | CPU86_BCR_FWRE);
|
|
|
|
/* Static FLASH Bank configuration here (only one bank) */
|
|
|
|
size_b0 = flash_int_get_size ((ulong *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
|
|
size_b1 = flash_amd_get_size ((uchar *) CONFIG_SYS_BOOTROM_BASE, &flash_info[1]);
|
|
|
|
if (size_b0 > 0 || size_b1 > 0) {
|
|
|
|
printf("(");
|
|
|
|
if (size_b0 > 0) {
|
|
puts ("Bank#1 - ");
|
|
print_size (size_b0, (size_b1 > 0) ? ", " : ") ");
|
|
}
|
|
|
|
if (size_b1 > 0) {
|
|
puts ("Bank#2 - ");
|
|
print_size (size_b1, ") ");
|
|
}
|
|
}
|
|
else {
|
|
printf ("## No FLASH found.\n");
|
|
return 0;
|
|
}
|
|
/* protect monitor and environment sectors
|
|
*/
|
|
|
|
#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_BOOTROM_BASE
|
|
if (size_b1) {
|
|
/* If U-Boot is booted from ROM the CONFIG_SYS_MONITOR_BASE > CONFIG_SYS_FLASH_BASE
|
|
* but we shouldn't protect it.
|
|
*/
|
|
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CONFIG_SYS_MONITOR_BASE,
|
|
CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[1]
|
|
);
|
|
}
|
|
#else
|
|
#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CONFIG_SYS_MONITOR_BASE,
|
|
CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
|
|
);
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
|
|
# ifndef CONFIG_ENV_SIZE
|
|
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
|
|
# endif
|
|
# if CONFIG_ENV_ADDR >= CONFIG_SYS_BOOTROM_BASE
|
|
if (size_b1) {
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR,
|
|
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[1]);
|
|
}
|
|
# else
|
|
flash_protect (FLAG_PROTECT_SET,
|
|
CONFIG_ENV_ADDR,
|
|
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
|
|
# endif
|
|
#endif
|
|
|
|
return (size_b0 + size_b1);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
void flash_print_info (flash_info_t * info)
|
|
{
|
|
int i;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("missing or unknown FLASH type\n");
|
|
return;
|
|
}
|
|
|
|
switch ((info->flash_id >> 16) & 0xff) {
|
|
case 0x89:
|
|
printf ("INTEL ");
|
|
break;
|
|
case 0x1:
|
|
printf ("AMD ");
|
|
break;
|
|
default:
|
|
printf ("Unknown Vendor ");
|
|
break;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_28F160C3B:
|
|
printf ("28F160C3B (16 Mbit, bottom sector)\n");
|
|
break;
|
|
case FLASH_28F160F3B:
|
|
printf ("28F160F3B (16 Mbit, bottom sector)\n");
|
|
break;
|
|
case FLASH_28F640C3B:
|
|
printf ("28F640C3B (64 M, bottom sector)\n");
|
|
break;
|
|
case AMD_ID_F040B:
|
|
printf ("AM29F040B (4 Mbit)\n");
|
|
break;
|
|
default:
|
|
printf ("Unknown Chip Type\n");
|
|
break;
|
|
}
|
|
|
|
if (info->size < 0x100000)
|
|
printf (" Size: %ld KB in %d Sectors\n",
|
|
info->size >> 10, info->sector_count);
|
|
else
|
|
printf (" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20, info->sector_count);
|
|
|
|
printf (" Sector Start Addresses:");
|
|
for (i = 0; i < info->sector_count; ++i) {
|
|
if ((i % 5) == 0)
|
|
printf ("\n ");
|
|
printf (" %08lX%s",
|
|
info->start[i],
|
|
info->protect[i] ? " (RO)" : " "
|
|
);
|
|
}
|
|
printf ("\n");
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
int flash_erase (flash_info_t * info, int s_first, int s_last)
|
|
{
|
|
vu_char *addr = (vu_char *)(info->start[0]);
|
|
int flag, prot, sect, l_sect;
|
|
ulong start, now, last;
|
|
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("- missing\n");
|
|
} else {
|
|
printf ("- no sectors to erase\n");
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect = s_first; sect <= s_last; sect++) {
|
|
if (info->protect[sect])
|
|
prot++;
|
|
}
|
|
|
|
if (prot) {
|
|
printf ("- Warning: %d protected sectors will not be erased!\n",
|
|
prot);
|
|
} else {
|
|
printf ("\n");
|
|
}
|
|
|
|
/* Check the type of erased flash
|
|
*/
|
|
if (info->flash_id >> 16 == 0x1) {
|
|
/* Erase AMD flash
|
|
*/
|
|
l_sect = -1;
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
addr[0x0555] = 0xAA;
|
|
addr[0x02AA] = 0x55;
|
|
addr[0x0555] = 0x80;
|
|
addr[0x0555] = 0xAA;
|
|
addr[0x02AA] = 0x55;
|
|
|
|
/* wait at least 80us - let's wait 1 ms */
|
|
udelay (1000);
|
|
|
|
/* Start erase on unprotected sectors */
|
|
for (sect = s_first; sect<=s_last; sect++) {
|
|
if (info->protect[sect] == 0) { /* not protected */
|
|
addr = (vu_char *)(info->start[sect]);
|
|
addr[0] = 0x30;
|
|
l_sect = sect;
|
|
}
|
|
}
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
/* wait at least 80us - let's wait 1 ms */
|
|
udelay (1000);
|
|
|
|
/*
|
|
* We wait for the last triggered sector
|
|
*/
|
|
if (l_sect < 0)
|
|
goto AMD_DONE;
|
|
|
|
start = get_timer (0);
|
|
last = start;
|
|
addr = (vu_char *)(info->start[l_sect]);
|
|
while ((addr[0] & 0x80) != 0x80) {
|
|
if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
printf ("Timeout\n");
|
|
return 1;
|
|
}
|
|
/* show that we're waiting */
|
|
if ((now - last) > 1000) { /* every second */
|
|
serial_putc ('.');
|
|
last = now;
|
|
}
|
|
}
|
|
|
|
AMD_DONE:
|
|
/* reset to read mode */
|
|
addr = (volatile unsigned char *)info->start[0];
|
|
addr[0] = 0xF0; /* reset bank */
|
|
|
|
} else {
|
|
/* Erase Intel flash
|
|
*/
|
|
|
|
/* Start erase on unprotected sectors
|
|
*/
|
|
for (sect = s_first; sect <= s_last; sect++) {
|
|
volatile ulong *addr =
|
|
(volatile unsigned long *) info->start[sect];
|
|
|
|
start = get_timer (0);
|
|
last = start;
|
|
if (info->protect[sect] == 0) {
|
|
/* Disable interrupts which might cause a timeout here
|
|
*/
|
|
flag = disable_interrupts ();
|
|
|
|
/* Erase the block
|
|
*/
|
|
addr[0] = 0x00200020;
|
|
addr[1] = 0x00200020;
|
|
addr[0] = 0x00D000D0;
|
|
addr[1] = 0x00D000D0;
|
|
|
|
/* re-enable interrupts if necessary
|
|
*/
|
|
if (flag)
|
|
enable_interrupts ();
|
|
|
|
/* wait at least 80us - let's wait 1 ms
|
|
*/
|
|
udelay (1000);
|
|
|
|
last = start;
|
|
while ((addr[0] & 0x00800080) != 0x00800080 ||
|
|
(addr[1] & 0x00800080) != 0x00800080) {
|
|
if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
printf ("Timeout (erase suspended!)\n");
|
|
/* Suspend erase
|
|
*/
|
|
addr[0] = 0x00B000B0;
|
|
addr[1] = 0x00B000B0;
|
|
goto DONE;
|
|
}
|
|
/* show that we're waiting
|
|
*/
|
|
if ((now - last) > 1000) { /* every second */
|
|
serial_putc ('.');
|
|
last = now;
|
|
}
|
|
}
|
|
if (addr[0] & 0x00220022 || addr[1] & 0x00220022) {
|
|
printf ("*** ERROR: erase failed!\n");
|
|
goto DONE;
|
|
}
|
|
}
|
|
/* Clear status register and reset to read mode
|
|
*/
|
|
addr[0] = 0x00500050;
|
|
addr[1] = 0x00500050;
|
|
addr[0] = 0x00FF00FF;
|
|
addr[1] = 0x00FF00FF;
|
|
}
|
|
}
|
|
|
|
printf (" done\n");
|
|
|
|
DONE:
|
|
return 0;
|
|
}
|
|
|
|
static int write_word (flash_info_t *, volatile unsigned long *, ulong);
|
|
static int write_byte (flash_info_t *info, ulong dest, uchar data);
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Copy memory to flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
|
{
|
|
ulong v;
|
|
int i, l, rc, cc = cnt, res = 0;
|
|
|
|
if (info->flash_id >> 16 == 0x1) {
|
|
|
|
/* Write to AMD 8-bit flash
|
|
*/
|
|
while (cnt > 0) {
|
|
if ((rc = write_byte(info, addr, *src)) != 0) {
|
|
return (rc);
|
|
}
|
|
addr++;
|
|
src++;
|
|
cnt--;
|
|
}
|
|
|
|
return (0);
|
|
} else {
|
|
|
|
/* Write to Intel 64-bit flash
|
|
*/
|
|
for (v=0; cc > 0; addr += 4, cc -= 4 - l) {
|
|
l = (addr & 3);
|
|
addr &= ~3;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
v = (v << 8) + (i < l || i - l >= cc ?
|
|
*((unsigned char *) addr + i) : *src++);
|
|
}
|
|
|
|
if ((res = write_word (info, (volatile unsigned long *) addr, v)) != 0)
|
|
break;
|
|
}
|
|
}
|
|
|
|
return (res);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write a word to Flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
static int write_word (flash_info_t * info, volatile unsigned long *addr,
|
|
ulong data)
|
|
{
|
|
int flag, res = 0;
|
|
ulong start;
|
|
|
|
/* Check if Flash is (sufficiently) erased
|
|
*/
|
|
if ((*addr & data) != data)
|
|
return (2);
|
|
|
|
/* Disable interrupts which might cause a timeout here
|
|
*/
|
|
flag = disable_interrupts ();
|
|
|
|
*addr = 0x00400040;
|
|
*addr = data;
|
|
|
|
/* re-enable interrupts if necessary
|
|
*/
|
|
if (flag)
|
|
enable_interrupts ();
|
|
|
|
start = get_timer (0);
|
|
while ((*addr & 0x00800080) != 0x00800080) {
|
|
if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
|
|
/* Suspend program
|
|
*/
|
|
*addr = 0x00B000B0;
|
|
res = 1;
|
|
goto OUT;
|
|
}
|
|
}
|
|
|
|
if (*addr & 0x00220022) {
|
|
printf ("*** ERROR: program failed!\n");
|
|
res = 1;
|
|
}
|
|
|
|
OUT:
|
|
/* Clear status register and reset to read mode
|
|
*/
|
|
*addr = 0x00500050;
|
|
*addr = 0x00FF00FF;
|
|
|
|
return (res);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write a byte to Flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
static int write_byte (flash_info_t *info, ulong dest, uchar data)
|
|
{
|
|
vu_char *addr = (vu_char *)(info->start[0]);
|
|
ulong start;
|
|
int flag;
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
if ((*((vu_char *)dest) & data) != data) {
|
|
return (2);
|
|
}
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
addr[0x0555] = 0xAA;
|
|
addr[0x02AA] = 0x55;
|
|
addr[0x0555] = 0xA0;
|
|
|
|
*((vu_char *)dest) = data;
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
/* data polling for D7 */
|
|
start = get_timer (0);
|
|
while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) {
|
|
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
|
|
return (1);
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|