u-boot/arch/mips/dts/img,boston.dts
Paul Burton ad8783cb1c boston: Introduce support for the MIPS Boston development board
This patch introduces support for building U-Boot to run on the MIPS
Boston development board. This is a board built around an FPGA & an
Intel EG20T Platform Controller Hub, used largely as part of the
development of new CPUs and their software support. It is essentially
the successor to the older MIPS Malta board.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-09-21 16:24:36 +02:00

223 lines
4.4 KiB
Plaintext

/dts-v1/;
#include <dt-bindings/clock/boston-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/mips-gic.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "img,boston";
chosen {
stdout-path = &uart0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "img,mips";
reg = <0>;
clocks = <&clk_boston BOSTON_CLK_CPU>;
};
};
memory@0 {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
gic: interrupt-controller {
compatible = "mti,gic";
interrupt-controller;
#interrupt-cells = <3>;
timer {
compatible = "mti,gic-timer";
interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
clocks = <&clk_boston BOSTON_CLK_CPU>;
};
};
pci0: pci@10000000 {
status = "disabled";
compatible = "xlnx,axi-pcie-host-1.00.a";
device_type = "pci";
reg = <0x10000000 0x2000000>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
ranges = <0x02000000 0 0x40000000
0x40000000 0 0x40000000>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pci0_intc 0>,
<0 0 0 2 &pci0_intc 1>,
<0 0 0 3 &pci0_intc 2>,
<0 0 0 4 &pci0_intc 3>;
pci0_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
pci1: pci@12000000 {
status = "disabled";
compatible = "xlnx,axi-pcie-host-1.00.a";
device_type = "pci";
reg = <0x12000000 0x2000000>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
ranges = <0x02000000 0 0x20000000
0x20000000 0 0x20000000>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pci1_intc 0>,
<0 0 0 2 &pci1_intc 1>,
<0 0 0 3 &pci1_intc 2>,
<0 0 0 4 &pci1_intc 3>;
pci1_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
pci2: pci@14000000 {
compatible = "xlnx,axi-pcie-host-1.00.a";
device_type = "pci";
reg = <0x14000000 0x2000000>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>;
ranges = <0x02000000 0 0x16000000
0x16000000 0 0x100000>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pci2_intc 0>,
<0 0 0 2 &pci2_intc 1>,
<0 0 0 3 &pci2_intc 2>,
<0 0 0 4 &pci2_intc 3>;
pci2_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
pci2_root@0,0,0 {
compatible = "pci10ee,7021";
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
eg20t_bridge@1,0,0 {
compatible = "pci8086,8800";
reg = <0x00010000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
eg20t_mac@2,0,1 {
compatible = "pci8086,8802";
reg = <0x00020100 0 0 0 0>;
phy-reset-gpios = <&eg20t_gpio 6 GPIO_ACTIVE_LOW>;
};
eg20t_gpio: eg20t_gpio@2,0,2 {
compatible = "pci8086,8803";
reg = <0x00020200 0 0 0 0>;
gpio-controller;
#gpio-cells = <2>;
};
eg20t_i2c@2,12,2 {
compatible = "pci8086,8817";
reg = <0x00026200 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
rtc@0x68 {
compatible = "st,m41t81s";
reg = <0x68>;
};
};
};
};
};
plat_regs: system-controller@17ffd000 {
compatible = "img,boston-platform-regs", "syscon";
reg = <0x17ffd000 0x1000>;
u-boot,dm-pre-reloc;
};
clk_boston: clock {
compatible = "img,boston-clock";
#clock-cells = <1>;
regmap = <&plat_regs>;
u-boot,dm-pre-reloc;
};
reboot: syscon-reboot {
compatible = "syscon-reboot";
regmap = <&plat_regs>;
offset = <0x10>;
mask = <0x10>;
};
uart0: uart@17ffe000 {
compatible = "ns16550a";
reg = <0x17ffe000 0x1000>;
reg-shift = <2>;
reg-io-width = <4>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_boston BOSTON_CLK_SYS>;
u-boot,dm-pre-reloc;
};
lcd: lcd@17fff000 {
compatible = "img,boston-lcd";
reg = <0x17fff000 0x8>;
};
flash@18000000 {
compatible = "cfi-flash";
reg = <0x18000000 0x8000000>;
bank-width = <2>;
};
};