2c23da06ba
The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using the same defconfig (and dts on the kernel side) for both models. Unfortunately this does not work for the otg controller, on the M9 this is routed to a micro-usb connector on the outside, while as on the A1000G-quad it is connected to an usb to sata bridge. This commit adds a new defconfig for the Mele-A1000G-quad to allow using different otg controller settings on the 2 boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
27 lines
973 B
Plaintext
27 lines
973 B
Plaintext
# The Mele M9 is yet another Allwinnner based Android top set box from Mele.
|
|
#
|
|
# It uses the same PCB as the A1000G quad, but in a new case without a
|
|
# USM sata storage slot, and the space on the PCB for the usb to sata
|
|
# bridge connected to the otg controller is not populated, possible
|
|
# making the micro usb otg connector functional (untested)
|
|
#
|
|
# It features an A31 SoC, 2G RAM, 16G Nand, 100Mbit ethernet, HDMI out,
|
|
# 3 USB A receptacles, 3.5 mm jack for analog audio out, optical spdif,
|
|
# micro USB B receptacle, RTL R8188EU (USB) and a full size sdcard slot
|
|
CONFIG_ARM=y
|
|
CONFIG_ARCH_SUNXI=y
|
|
CONFIG_MACH_SUN6I=y
|
|
CONFIG_DRAM_ZQ=120
|
|
CONFIG_USB1_VBUS_PIN="PC27"
|
|
CONFIG_USB2_VBUS_PIN=""
|
|
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
|
|
CONFIG_SPL=y
|
|
CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
|
|
CONFIG_CMD_SETEXPR=y
|
|
CONFIG_CMD_NET=y
|
|
CONFIG_ETH_DESIGNWARE=y
|
|
CONFIG_AXP221_DCDC1_VOLT=3300
|
|
CONFIG_AXP221_DLDO1_VOLT=3300
|
|
CONFIG_AXP221_DLDO4_VOLT=3300
|
|
CONFIG_AXP221_ALDO1_VOLT=3300
|