u-boot/arch/arm/mach-at91/phy.c
Wenyou Yang eced5a7eb4 ARM: cpu: at91: clean up peripheral clock code
Due to introducing the new peripheral clock handle functions,
use these functions to clean up the duplicated code.

Meanwhile, remove unneeded header file include, at91_pmc.h.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Tested-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
[fixup for arm920t code]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-02-18 21:34:40 +01:00

57 lines
1.4 KiB
C

/*
* (C) Copyright 2007-2008
* Stelian Pop <stelian@popies.net>
* Lead Tech Design <www.leadtechdesign.com>
*
* (C) Copyright 2012
* Markus Hubig <mhubig@imko.de>
* IMKO GmbH <www.imko.de>
*
* Copyright (C) 2013 DENX Software Engineering, hs@denx.de
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <linux/sizes.h>
#include <asm/arch/at91_rstc.h>
#include <watchdog.h>
void at91_phy_reset(void)
{
unsigned long erstl;
unsigned long start = get_timer(0);
unsigned long const timeout = 1000; /* 1000ms */
at91_rstc_t *rstc = (at91_rstc_t *)ATMEL_BASE_RSTC;
erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
/*
* Need to reset PHY -> 500ms reset
* Reset PHY by pulling the NRST line for 500ms to low. To do so
* disable user reset for low level on NRST pin and poll the NRST
* level in reset status register.
*/
writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
AT91_RSTC_MR_URSTEN, &rstc->mr);
writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
/* Wait for end of hardware reset */
while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) {
/* avoid shutdown by watchdog */
WATCHDOG_RESET();
mdelay(10);
/* timeout for not getting stuck in an endless loop */
if (get_timer(start) >= timeout) {
puts("*** ERROR: Timeout waiting for PHY reset!\n");
break;
}
};
/* Restore NRST value */
writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
}