u-boot/board/freescale/ls1046aqds
Tom Rini 79df00fdb4 MAINTAINERS: Add missing boards and config entries
As part of my usual round of build testing, output about missing
MAINTAINERS information was not logged, and thus often overlooked.
Correct that mistake by ensuring that I log the output of
genboardscfg.py every time.  As part of that, address a number of
missing MAINTAINERS entires.  In the case of a missing file, I have put
the original submitter down.  In the rest of the cases I have added the
config (and sometimes relevant header file) to the existing set of file
globs.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-06 09:58:51 -05:00
..
ddr.c common: freescale: Move arch-specific declarations 2017-06-05 12:30:55 -04:00
ddr.h armv8: ls1046aqds: Add LS1046AQDS board support 2016-09-14 14:11:10 -07:00
eth.c armv8: ls1043/ls1046aqds: add support for RGMII_TXID 2017-09-07 13:23:52 -05:00
Kconfig NXP: Introduce board/freescale/common/Kconfig and migrate CHAIN_OF_TRUST 2017-01-24 10:33:59 -05:00
ls1046aqds_pbi.cfg armv8: ls1046aqds: Add LS1046AQDS board support 2016-09-14 14:11:10 -07:00
ls1046aqds_qixis.h armv8: ls1046aqds: Add LS1046AQDS board support 2016-09-14 14:11:10 -07:00
ls1046aqds_rcw_nand.cfg armv8: ls1046aqds: Add LS1046AQDS board support 2016-09-14 14:11:10 -07:00
ls1046aqds_rcw_sd_ifc.cfg armv8: ls1046aqds: Add LS1046AQDS board support 2016-09-14 14:11:10 -07:00
ls1046aqds_rcw_sd_qspi.cfg armv8: ls1046aqds: Add LS1046AQDS board support 2016-09-14 14:11:10 -07:00
ls1046aqds.c fsl-lsch2: csu: remove multiple calling function 2017-08-09 09:57:32 -07:00
MAINTAINERS MAINTAINERS: Add missing boards and config entries 2017-11-06 09:58:51 -05:00
Makefile armv8: ls1046ardb: SPL size reduction 2017-04-17 09:03:30 -07:00
README armv8: ls1046aqds: Add LS1046AQDS board support 2016-09-14 14:11:10 -07:00

Overview
--------
The LS1046A Development System (QDS) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LS1046A
LayerScape Architecture processor. The LS1046AQDS provides SW development
platform for the Freescale LS1046A processor series, with a complete
debugging environment.

LS1046A SoC Overview
--------------------
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A
SoC overview.

 LS1046AQDS board Overview
 -----------------------
 - SERDES Connections, 8 lanes supporting:
      - PCI Express - 3.0
      - SGMII, SGMII 2.5
      - QSGMII
      - SATA 3.0
      - XFI
 - DDR Controller
     - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
 -IFC/Local Bus
    - One in-socket 128 MB NOR flash 16-bit data bus
    - One 512 MB NAND flash with ECC support
    - PromJet Port
    - FPGA connection
 - USB 3.0
    - Three high speed USB 3.0 ports
    - First USB 3.0 port configured as Host with Type-A connector
    - The other two USB 3.0 ports configured as OTG with micro-AB connector
 - SDHC port connects directly to an adapter card slot, featuring:
    - Optional clock feedback paths, and optional high-speed voltage translation assistance
    - SD slots for SD, SDHC (1x, 4x, 8x), and/or MMC
    - eMMC memory devices
 - DSPI: Onboard support for three SPI flash memory devices
 - 4 I2C controllers
 - One SATA onboard connectors
 - UART
   - Two 4-pin serial ports at up to 115.2 Kbit/s
   - Two DB9 D-Type connectors supporting one Serial port each
 - ARM JTAG support

Memory map from core's view
----------------------------
Start Address    End Address     Description		Size
0x00_0000_0000 - 0x00_000F_FFFF  Secure Boot ROM	1MB
0x00_0100_0000 - 0x00_0FFF_FFFF  CCSRBAR		240MB
0x00_1000_0000 - 0x00_1000_FFFF  OCRAM0 		64KB
0x00_1001_0000 - 0x00_1001_FFFF  OCRAM1 		64KB
0x00_2000_0000 - 0x00_20FF_FFFF  DCSR			16MB
0x00_6000_0000 - 0x00_67FF_FFFF  IFC - NOR Flash	128MB
0x00_7E80_0000 - 0x00_7E80_FFFF  IFC - NAND Flash	64KB
0x00_7FB0_0000 - 0x00_7FB0_0FFF  IFC - FPGA		4KB
0x00_8000_0000 - 0x00_FFFF_FFFF  DRAM1			2GB
0x05_0000_0000 - 0x05_07FF_FFFF  QMAN S/W Portal	128M
0x05_0800_0000 - 0x05_0FFF_FFFF  BMAN S/W Portal	128M
0x08_8000_0000 - 0x09_FFFF_FFFF  DRAM2			6GB
0x40_0000_0000 - 0x47_FFFF_FFFF  PCI Express1		32G
0x48_0000_0000 - 0x4F_FFFF_FFFF  PCI Express2		32G
0x50_0000_0000 - 0x57_FFFF_FFFF  PCI Express3		32G

Booting Options
---------------
a) Promjet Boot
b) NOR boot
c) NAND boot
d) SD boot
e) QSPI boot